Thursday, February 18th 2010
Corsair Obsidian 700D Case Detailed
Quality-enthusiast Corsair is ready with its second PC case, the Obsidian 700D. The new 700D is positioned slightly lower than the 800D which the company debuted last year. Information on the 700D surfaced from a leaked company brochure. It shows the case to be an ATX full-tower, with black overall. There is no side-panel window like on the 800D, but is said to inherit most of the interior features of the 800D. There are six internal drive bays for HDDs or SSDs, five exposed 5.25" and one exposed 3.5" bay. Interiors are said to retain cable-management holes, three-zone cooling, and pre-drilled vents for a triple-120mm fan radiator.
The case measures 24" (H) x 24" (L) x 9" (W) / 609 mm x 609 mm x 229 mm, weighs 34.8 lbs / 15.8 kg, and makes use of steel for the internal frame, and aluminum for its panels. There's room for three 140 mm and up to four 120 mm fans. There are eight expansion slots, so it makes room for a double-slot video card seated on the bottom-most slot of the motherboard. There's room for ITX, m-ATX, ATX, and EATX motherboard types, the motherboard tray has a cutout at the CPU socket area for easy handling of certain types of coolers. The front-panel has four USB 2.0 ports, a FireWire port, and the FP audio connectors. Corsair ships this case with a two-year warranty. Its price and availability remain yet to be known.
The case measures 24" (H) x 24" (L) x 9" (W) / 609 mm x 609 mm x 229 mm, weighs 34.8 lbs / 15.8 kg, and makes use of steel for the internal frame, and aluminum for its panels. There's room for three 140 mm and up to four 120 mm fans. There are eight expansion slots, so it makes room for a double-slot video card seated on the bottom-most slot of the motherboard. There's room for ITX, m-ATX, ATX, and EATX motherboard types, the motherboard tray has a cutout at the CPU socket area for easy handling of certain types of coolers. The front-panel has four USB 2.0 ports, a FireWire port, and the FP audio connectors. Corsair ships this case with a two-year warranty. Its price and availability remain yet to be known.
21 Comments on Corsair Obsidian 700D Case Detailed
But i didnt like the hotswap, but i guess they could have place more than 4 drives in the remaining area
800d: 24" (H) x 24" (L) x 9" (W) - (609mm X 609mm X 229 mm), weighs 44 pounds
700d: 24″ (H) x 24″ (L) x 9″ (W) / 609 mm x 609 mm x 229 mm, weighs 34.8 lbs / 15.8 kg,
Oh and possibly no hdd covers, nor hot-swapable bay for the hdd's.
I dont see much reduction to warrant a sub $200 price tag. We'll see when it gets listed. My guess $220 + $24 shipping(ground). Compared to the 800d at $280+shipping at the moment.
Not trying to single you out doug, but the first time I had to boot another drive in my 800D I was very pleased with the almost instant ability to do so. It is rare that I use it, but what a releif it is versus opening it up and digging for a power lead and all the BS that follows. I just slid it in and got the windows recognition;)
I think this case is nice, dont get me wrong, but its less involved. I really hope its priced right.
I too love the hot swap bays. The only thing I don't really like about the 800d is the fact that you have to remove the front panel to access the 5.25 bays and bottom HD bays. I'm guessing, this will still be true for the 5.25 bays on the 700d.
Come on Corsair, I KNOW you can make a worthy competitor to the Antec 300 case. Just take the nifty cable management stuff, give it a nice side window and none of that panel fan or grill BS, trim the size down to mid-tower levels, make sure it will fit a HD 5970, leave out the hot-swap BS, and give it twin 140/120 fan mounts in the front, a 200mm top fan, and a 120mm rear fan.
I'd swap to that in a heartbeat if they released a case like that. :rockout:
The all black scheme and the fact it uses tons of actual steel are all nice bonuses. Although, using steel for panels as well would have been great. I remember owning two identical Thermaltake Xaser cases with one important difference: one was all steel design weighing a ton, the other one was all aluminum. The aluminum version dented too easily and it vibrated like a dying engine on a aging B-29 once all the case fans were maxed out. The steel version had no vibration problems, it was nearly dent-proof, and the heavy steel panels muffled the fan noise almost completely.