Wednesday, March 3rd 2010

Biostar Readies TA890FXE Motherboard

Biostar is readying a mid-range motherboard in its T-Series lineup based on AMD's upcoming 890FX + SB850 chipset. The T-Series TA890FXE was pictured at the ongoing CeBIT event without its cooling assembly. It supports existing and upcoming socket AM3 processors, including Phenom II X6. The CPU is powered by a 5+1 phase VRM, supporting 140W processors. The 890FX chipset gives out four PCI-Express 2.0 x16 slots supporting ATI CrossFireX technology, apart from two legacy PCI slots. The SB850 southbridge gives out six SATA 6 Gb/s ports, of which five are internal, probably one external. An additional storage controller by VIA drives the lone IDE connector. 7.1 channel HD audio, gigabit Ethernet, and FireWire make for the rest of it. The TA890FXE is expected to be out later in April, when AMD unveils its latest processors.
Source: PC Watch
Add your own comment

21 Comments on Biostar Readies TA890FXE Motherboard

#1
tonyd223
did someone rob the chipset coolers?

No USB3?

And looks like I've got to but a PSU with a 8pin EPS connector...

Doesn't look good for the X6 chips if all these mobo's have 140watt capacity...
Posted on Reply
#2
Mussels
Freshwater Moderator
gah, weird layout. multi GPU = many useless slots.
Posted on Reply
#3
Marineborn
the only way you could use all four pcie16 slots is by watercooling all your cards, and yeah...lol ...its pretty much just a hey look what i can do motherboard, *claps slowly*
Posted on Reply
#4
Mussels
Freshwater Moderator
tonyd223did someone rob the chipset coolers?

No USB3?

And looks like I've got to but a PSU with a 8pin EPS connector...

Doesn't look good for the X6 chips if all these mobo's have 140watt capacity...
most demo boards dont have pics of the heatsink. please read the title where it says "Biostar readies..." meaning its not done yet.


eh? thats a standard 8 pin CPU AUX connector, been around for many many years.

140W capacity doesnt mean its just for the x6 chips, could be for OC'ers as well. there are older chips (phenom I/II) that also use over 100W at stock, so it could be for backward compatibility as well.
Posted on Reply
#5
pantherx12
Mussels I think you may of misunderstood the chap...

Also even the latest version of the 965 ( which runs at a much lower wattage) uses 125w.
Posted on Reply
#6
Mussels
Freshwater Moderator
pantherx12Mussels I think you may of misunderstood the chap...

Also even the latest version of the 965 ( which runs at a much lower wattage) uses 125w.
he was implying that 140W would suck if the 6 core CPU's needed it. they wont, like the previous gen the topmost models will be of higher wattage than the lower ones. at least it gives us OC'ing room.


What i was saying (and you filled the blanks) is that the previous high of 125W moving to 140W, is hardly a bad thing - 15W for 50% more cores? awesome!
Posted on Reply
#7
pantherx12
For some reason I had it in my head that the socket couldn't pull more then 140w .

I blame lack of sleep, woke up at 3am and decided to MAKE my rig work again.
Posted on Reply
#8
tonyd223
I'm worried that X6 will pull 140w standard without overclocking... which will be interesting anyway because of the amount of heat that AMD chips produce anyway...
Posted on Reply
#9
pantherx12
tonyd223I'm worried that X6 will pull 140w standard without overclocking... which will be interesting anyway because of the amount of heat that AMD chips produce anyway...
A lot less then intels latest chips?
Posted on Reply
#10
tonyd223
ok - I'm being really silly here? I thought that Intel chips were considerably more power efficient than AMD?
Posted on Reply
#11
pantherx12
tonyd223ok - I'm being really silly here? I thought that Intel chips were considerably more power efficient than AMD?
Well the i7s even with Hyper Threading turned off still run a damn lot hotter then AMDs chips.


With Hyper-threading on many people have had even tripple radiator loops heatsoak with their i7s around 4ghz.

No AMD chip could heat-soak a triple rad set up.
Posted on Reply
#12
tonyd223
that's heat - what about it's power use?
Posted on Reply
#13
pantherx12
tonyd223Iwhich will be interesting anyway because of the amount of heat that AMD chips produce anyway...
Yeah I was replying to this ;)
Posted on Reply
#14
tonyd223
thanks (I obviously need to sleep)
Posted on Reply
#15
chaotic_uk
hope it lasts longer than the biostar ta790gx , had 2 die on me in the last 6 months . i wont be getting another biostar mobo (crap built)
Posted on Reply
#16
pantherx12
chaotic_ukhope it lasts longer than the biostar ta790gx , had 2 die on me in the last 6 months . i wont be getting another biostar mobo (crap built)
Perchance were you overclocking with the motherboard?

A motherboard with no mosfet cooling?

If yes you were, then my second sentence makes it clear I think why the motherboards may of been breaking ;)
Posted on Reply
#17
MKmods
Case Mod Guru
tonyd223did someone rob the chipset coolers?
LOL, sweet.. I always add my own anyways...

What I dont like is the PCI X slots so close together.. Its a bummer as I was hoping to go back to Biostar (always liked them)
Posted on Reply
#18
chaotic_uk
pantherx12Perchance were you overclocking with the motherboard?

A motherboard with no mosfet cooling?

If yes you were, then my second sentence makes it clear I think why the motherboards may of been breaking ;)
first one yes second no
Posted on Reply
#19
pantherx12
There you go, only the second one was shoddily made XD
Posted on Reply
#20
Mussels
Freshwater Moderator
tonyd223that's heat - what about it's power use?
they're directly related. 100W in = 100W of heat out.
Posted on Reply
#21
WarEagleAU
Bird of Prey
Looks pretty good, Biostar has some rock solid boards, that provide good OC features. I guess since this is a middle of the road board, they included the Sata 6 but not USB 3.0
Posted on Reply
Add your own comment
Nov 24th, 2024 01:40 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts