Thursday, July 8th 2010
![ASRock](https://tpucdn.com/images/news/asrock-v1723408558483.png)
ASRock Readies P55 Extreme4, Packs Four USB 3.0 and SATA 6 Gbps Ports Each
ASRock is readying a new high-end socket LGA1156 motherboard based on the Intel P55 chipset, the P55 Extreme4. Designed to be a notch above the P55 Deluxe3, which packs two SATA 6 Gb/s and two USB 3.0 ports, the Extreme4 uses two 2-port controllers to drive four SATA 6 Gb/s ports, and two USB 3.0 controllers to drive two USB 3.0 ports on the rear panel, and two ports by internal headers (for the latest cases that come with USB 3.0 front-panel ports, or simply by USB 3.0 expansion brackets). Connections to these four controllers is conveniently handled by configuring the PCI-Express x4 port from the P55 PCH to work as four x1 ports, apart from the four x1 ports it gives apart from the x4 port. This way, the board is also able to provide three x1 expansion slots and drive the PCI-E GbE controller.
The other expansion slots are two PCI-Express 2.0 x16 (electrical x8/x8, when both are populated), supporting SLI and CrossFire, and two PCI. Apart from the four SATA 6 Gb/s ports (color-coded white), the six SATA 3 Gb/s ports (color-coded blue) are present internally. The CPU socket seems to be powered by an 8+2 phase VRM. The four DDR3 memory slots can take DDR3 modules with frequencies of over 2600 MHz with overclocking. Other connectivity features include 8-channel HD audio and gigabit Ethernet. ASRock will introduce the P55 Extreme4 in a few weeks' time.
Source:
Le Comptior du Hardware
The other expansion slots are two PCI-Express 2.0 x16 (electrical x8/x8, when both are populated), supporting SLI and CrossFire, and two PCI. Apart from the four SATA 6 Gb/s ports (color-coded white), the six SATA 3 Gb/s ports (color-coded blue) are present internally. The CPU socket seems to be powered by an 8+2 phase VRM. The four DDR3 memory slots can take DDR3 modules with frequencies of over 2600 MHz with overclocking. Other connectivity features include 8-channel HD audio and gigabit Ethernet. ASRock will introduce the P55 Extreme4 in a few weeks' time.
11 Comments on ASRock Readies P55 Extreme4, Packs Four USB 3.0 and SATA 6 Gbps Ports Each
why? intel put PCIe 1.1 on them.. NOT full PCIe 2.0
ASUS P7P55D-E LX LGA 1156 Intel P55 SATA 6Gb/s USB...
a "com port" is one thing, a "com port header" is another thing
Intel only provides 16 PCI-E 2.0 lanes from the P55 chipset on the processor, and another 8 PCI-E 1.1 lanes from the PCH on the board.
The motherboard manufacturers basically have three choices. Put the SATA 6Gbps/USB 3.0 ports on a PCI-E 1.1 lane, use a bridge chip like the NF200 or PLX chip to convert the 16 PCi-E 2.0 lanes into 32 lanes, or take 8 PCI-E 2.0 lanes away from the graphics card and use 1 for the SATA 6Gbps and 1 for the USB 3.0.
Of course the first option is what they commonly do, and leads to bottlenecked speeds. However, with USB3.0, at least the speeds are noticeably better still.
The second option adds latency, which is a big no-no for anyone that would actually use 6Gbps(SSD owners only here).
The third option of course would actually not be that bad, and probably would be the option I would prefer. Limitting the graphics card to x8 wouldn't really effect performance, plus the 8 2.0 lanes could be used instad of the 8 1.1 lanes from the PCH, meaning those 1.1 lanes could be dedicated to a second PCI-E slot for a second graphics card still, granted not at the best performance possible, but still a good option.
Marvell chips are a trash - will not support more than 350 MB/s, I'd preffer LSI SAS 2008 (or, at least, 2004) pre-installed (and no need for x8 slot then).
The board itself will be about 2 times more expencive, but who will buy X55 boards then? :)