Thursday, July 22nd 2010

Sharkoon Announces 140 mm, 800 rpm Silent Eagle Series Fans

Sharkoon is expanding their "Silent Eagle" Case Fan-series with a model that has an edge length of 140mm. With increased airflow at a lower volume, the Sharkoon Silent Eagle 800 is particularly efficient for use in silent PC systems.

"Silent Eagle" case fans are characterized by their special design: The rotor blades had the surface texture of a golf ball. The numerous small, round dimples produce an increased amount of airflow. In addition, the rounded edges of the fan's frame improves the air influx.
The Sharkoon Silent Eagle 800mm rotates at 800 rpm, moving 93.85 cubic meters of air per hour while at a noise level of 12.4 decibels. The power consumption is 0.1 amps, the rated voltage is 12 Volts. The white propeller and black frame case fan rotates in a rugged metal bearing and weighs 162 grams.

The fan can either be connected to the motherboard or power supply, included in shipping are a 3pin/4pin adapter cable and a separate cable to monitor the number of revolutions. Additionally, Sharkoon includes four fan screws and rubber bolts for the acoustic decoupling of the housing. The 3pin connector cable is protected by a rubberized hose.

With the new 140mm version, the "Silent Eagle" series now comprises of ten models of various sizes and performance levels. Besides the standard design, fans are also available in an illuminated LED model as well as an SE version which includes a modular cable system.

End customers can find the Sharkoon Silent Eagle 800 available immediately for the retail price of 12.99 euros from authorized retailers. Sharkoon Silent Eagle 800: 93.85 m³ airflow by 12.4 dB(A) / MSRP 12.99 euros.
Add your own comment

12 Comments on Sharkoon Announces 140 mm, 800 rpm Silent Eagle Series Fans

#1
HTC
btarunrThe Sharkoon Silent Eagle 800mm rotates at 800 rpm, moving 93.85 cubic meters of air per hour while at a noise level of 12.4 decibels.
There seems to be a typo in this phrase: shouldn't it be 140mm?
Posted on Reply
#2
b82rez
I've noticed all 'silent' fans have this white and black look to them..
Posted on Reply
#3
pentastar111
800 rpm? You'd really have to be an absolute silence fanatic to count on a rig filled with these being remotely cool, I would imagine things being a little warm. Quiet to be sure, just hot. Or are these meant for the htpc?
Posted on Reply
#4
Flanker
with proper fan blade design and reasonably low impedance of fin arrays in the heatsink, 800rpm is more than enough. At least for components running at stock clocks
Posted on Reply
#5
RejZoR
I'm using 800rpm Noiseblocker in my modified PSU. Works pretty well. Super silent.
Posted on Reply
#6
WarEagleAU
Bird of Prey
with a few of them and the airflow they move, should be fine. Im interested in the modular cable system though. how does that work?
Posted on Reply
#7
Kaleid
pentastar111800 rpm? You'd really have to be an absolute silence fanatic to count on a rig filled with these being remotely cool, I would imagine things being a little warm. Quiet to be sure, just hot. Or are these meant for the htpc?
My system only uses 500rpm fans, 4 of them.
Graphiccard, CPU and 2 case fans.
The only 800rpm fan I have is in the Zalman PSU which never spins up faster.

And harddrives are enclosed into Scythe Quiet Drives. Silence is golden.
Posted on Reply
#8
fochkoph
Always wanted to try Sharkoon, they're so hard to find in the states at a decent price. Any idea what type of bearing it's using?
WarEagleAUwith a few of them and the airflow they move, should be fine. Im interested in the modular cable system though. how does that work?
Last I checked there's a three-pin male connector located directly on the chassis of the fan and they give you the option of cables that have different resistor.
Posted on Reply
#9
ebolamonkey3
Yea, always wanted a Sharkoon as well, bit-tech rated them as highly as the Scythe GTs, which are awesome fans.
Posted on Reply
#10
AsRock
TPU addict
Ball or sleeve ?, As i will not touch a sleeve based fan.. I'd get one if it was around 2kRPM as they would very nicely on the MK-13.
Posted on Reply
#11
OnBoard
AsRockBall or sleeve ?, As i will not touch a sleeve based fan..
"fan rotates in a rugged metal bearing" so ball.

I like sleeve, ball bearings almost always make some kind of whine or high pitch that I don't like. Fluid bearing is good though.
Posted on Reply
#12
FreedomEclipse
~Technological Technocrat~
kinda have to agree with the low RPM thing, even my Noctua S12 spins at 1200rpm n moves such a tiny amount of air :(

If that was a 220mm or 240mm @800RPM that would be understandable. but 800RPM even with longer fins it makes me feel uncomfortable
Posted on Reply
Add your own comment
Nov 23rd, 2024 10:45 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts