Saturday, January 7th 2012
![Wireless Networking](https://tpucdn.com/images/news/wifi-v1723408558483.png)
TrendNet Displays 802.11ac 1300 Mbps Wireless Routers
TRENDnet, a best-in-class wired and wireless networking hardware brand, today displays from 2012 International CES in Las Vegas, Nevada, the next generation 1300 Mbps Dual Band Wireless AC Router, model TEW-811DR, and 1300 Mbps Dual Band Wireless AC Media Bridge, model TEW-800MB.
The explosion of wireless devices in the home and office coupled with high demand for HD video-based content will continue to compound wireless network loading for years to come. 802.11ac is a new wireless standard designed to meet tomorrow's extreme wireless bandwidth networking needs.The full 802.11ac specification can theoretically accommodate speeds as high as 6.8 Gbps; however the first generation of products will be rated at either 866 Mbps or 1.3 Gbps.
802.11ac uses the uncongested low interference wireless 5 GHz spectrum and is backward compatible with Dual Band 802.11n (wireless n) routers which also use the 5 GHz band. It is not compatible with standard single band wireless n devices which use the 2.4GHz band, such as most laptops and mobile devices.
802.11ac wireless coverage is similar to that of wireless n and provides whole home coverage. New Beam Forming technology further improves the ability to transmit wireless signals around physical obstacles such as masonry walls. The first generation 802.11ac devices will be released to market as early as late 2012.
"New 802.11ac represents a huge jump in wireless performance," stated Zak Wood, director of global marketing for TRENDnet. "It will be able to easily handle a large number of wireless connections simultaneously. It will also be able to support extremely high wireless throughput at great distances from the router."
TRENDnet's 1300 Mbps Dual Band Wireless AC Router, model TEW-811DR, is a concurrent dual band router with a 450 Mbps wireless n band to network everyday mobile devices and laptops and an ultra high performance 1300 Mbps wireless band.
Gigabit ports maintain high performance wired connections. Wi-Fi Protected Setup (WPS) integrates other WPS supported wireless adapters at the touch of a button. WMM technology prioritizes video and audio packets and Beam Forming technology improves wireless transmissions through physical obstacles.
The TEW-811DR will be available in late 2012 with an MSRP of over US $200.
About TRENDnet's 802.11ac Adapter
TRENDnet's 1300 Mbps Wireless AC Media Bridge, model TEW-800MB, connects up to four media center devices to an ultra-high speed 1300 Mbps 802.11ac network. Experience the seamless exhilaration of Gigabit wireless speeds.
Four Gigabit ports connect Internet TVs, network video recorders, media players, and more to an ultra high speed network. Wi-Fi Protected Setup (WPS) integrates other WPS supported wireless adapters at the touch of a button. WMM technology prioritizes video and audio packets and Beam Forming technology improves wireless transmissions around physical obstacles.
The TEW-800MB will be available in late 2012 with an MSRP of approximately US $200.
The explosion of wireless devices in the home and office coupled with high demand for HD video-based content will continue to compound wireless network loading for years to come. 802.11ac is a new wireless standard designed to meet tomorrow's extreme wireless bandwidth networking needs.The full 802.11ac specification can theoretically accommodate speeds as high as 6.8 Gbps; however the first generation of products will be rated at either 866 Mbps or 1.3 Gbps.
802.11ac uses the uncongested low interference wireless 5 GHz spectrum and is backward compatible with Dual Band 802.11n (wireless n) routers which also use the 5 GHz band. It is not compatible with standard single band wireless n devices which use the 2.4GHz band, such as most laptops and mobile devices.
802.11ac wireless coverage is similar to that of wireless n and provides whole home coverage. New Beam Forming technology further improves the ability to transmit wireless signals around physical obstacles such as masonry walls. The first generation 802.11ac devices will be released to market as early as late 2012.
"New 802.11ac represents a huge jump in wireless performance," stated Zak Wood, director of global marketing for TRENDnet. "It will be able to easily handle a large number of wireless connections simultaneously. It will also be able to support extremely high wireless throughput at great distances from the router."
TRENDnet's 1300 Mbps Dual Band Wireless AC Router, model TEW-811DR, is a concurrent dual band router with a 450 Mbps wireless n band to network everyday mobile devices and laptops and an ultra high performance 1300 Mbps wireless band.
Gigabit ports maintain high performance wired connections. Wi-Fi Protected Setup (WPS) integrates other WPS supported wireless adapters at the touch of a button. WMM technology prioritizes video and audio packets and Beam Forming technology improves wireless transmissions through physical obstacles.
The TEW-811DR will be available in late 2012 with an MSRP of over US $200.
About TRENDnet's 802.11ac Adapter
TRENDnet's 1300 Mbps Wireless AC Media Bridge, model TEW-800MB, connects up to four media center devices to an ultra-high speed 1300 Mbps 802.11ac network. Experience the seamless exhilaration of Gigabit wireless speeds.
Four Gigabit ports connect Internet TVs, network video recorders, media players, and more to an ultra high speed network. Wi-Fi Protected Setup (WPS) integrates other WPS supported wireless adapters at the touch of a button. WMM technology prioritizes video and audio packets and Beam Forming technology improves wireless transmissions around physical obstacles.
The TEW-800MB will be available in late 2012 with an MSRP of approximately US $200.
24 Comments on TrendNet Displays 802.11ac 1300 Mbps Wireless Routers
Considering this is set to replace 802.11n over time and that the devices are meant to be dual band for now to support 2.4GHz as well (albeit only for older devices) I guess it's not a huge issue.
Because almost every single new device that i have seen supports N standard but they are all 2,4GHz. Which is rather useless since all current devices operate at this frequency and there is loads of noise created by this (resulting in sucky range and speed).
2.4GHz n is still quite superior to 2.4GHz a/b... and it looks like ac is going to crap over everything. at least they had the smarts to include gigabit ports.
we're due for 10Gb ethernet in homes soon i reckon, they'll bloody have to >.>
It's nothing about full duplex, it's about the theoretical bandwidth minus overheads etc.
Even wired Ethernet have overheads, they're just not as high as they are when it comes to Wi-Fi.
Because it's a consumer technology the transmission power is limited to silly low amounts, a more powerful transmitter would give you the kind of speeds that are being claimed in combination with better antenna designs.
I've seen Wi-Fi setups with a range of multiple kilometres using a special type of antenna. Sadly that company didn't understand how to promote their technology and it never really took off, but they were fairly compact antennas compared to the stuff used for point to point Wi-Fi over long distance.
You be glad you never tested 802.11a in its early days, it had a range of about 5m, if you were lucky and there was nothing between you and the access point.
It also depends on the type of hardware you have, as to even have a chance of getting the kind of speeds that are being advertised you need 3x3 MIMO setups on both sides, or even better 4x4 MIMO, but as far as I'm aware only Quantenna offers that.
802.11ac supports up to 8 antennas and beamforming which should help improve the range.
That said, looking at the graph here www.5gwifi.org/advantages-of-80211ac.php after about 10m the speed drops off sharply, but apparently we can expect better range than 2.4GHz 802.11n.
Another neat feature of 802.11ac is that it supports something called MU-MIMO that allows multiple users to stream data simultaneously instead of having to share data streams with all the connected users. This should reduce latency and potentially increase speeds as well, although it's of course limited to how many data streams your router/access point can handle and the type of devices you're connecting to it and how many channels each device uses. Say you got a 3x3 MIMO router, you could have a 2x2 MIMO laptop and a single channel smartphone and they'd each get a dedicated data stream that wouldn't be shared between the two devices.
We'll see how 802.11ac works out, as it's as yet to be tested in real world scenarios.
Atheros or Broadcom 802.11AC 1gbps that was unveiled / launched or something 2 days ago.
ces.cnet.com/8301-33372_1-57352574/broadcom-802.11ac-wi-fi-chips-hit-ces-2012/
I just pray that both Broadcom and Atheros have decent stable properly working drivers / opensource drivers for this otherwise they will 802.11N fail again.
Broadcom is a joke though, they have a 2x2 MIMO chip that can do 800Mbit/s something, yet it only has USB 2.0 interface...
He said that 2.4Ghz is able to carry through obstacles better, but has more interference due to congestion.
Most wireless home phones now run @ 1.9 Ghz and cellular devices use 800 / 1800 Mhz
A lot of the problems with interference could be solved by using what is still mostly used by police and military known as frequency hopping, as that vastly reduces interference and also makes for much more secure wireless connections, but alas, that is unlikely to happen when it comes to consumer technology.
Soundwaves vibrate or pass around objects. But don't technically pass through them like RF does.
But I am a natural skeptic. Do you have any links that support what you say?
There are actually a lot of devices that support 5Ghz. I have 5Ghz on my Macbook Pro, also my Asus Gamer Laptop and desktop PC connected via a linksys 5Ghz USB wifi device. I run all my devices off an Asus dual band router in the 5Ghz range and everyone else can connect to the 2.4Ghz. My printer and iphone use 2.4Ghz as well. Most media extenders / senders use 5Ghz.
Chris