Wednesday, March 7th 2012

Antec High Current Pro Platinum 1000W PSU Pictured

by
btarunr
 Discuss (20 Comments)
Antec showed off the High Current Pro (HCP) Platinum 1000W PSU, at CeBIT. The HCP Platinum is an 80 Plus Platinum-compliant variant of the original High Current Pro launched in 2010, which were 80 Plus Gold-compliant. Antec's exhibit featured a special body retrofitted with acrylic windows so visitors could see its innards, the retail version will obviously have a full-metal body, and a 135 mm fan in its right place, to keep the unit cool. The HCP Platinum 1000W features a quad-12V rail design, with four 40A rails. The unit features completely modular cabling, including for the 24-pin ATX and dual 8-pin EPS connectors. There's sufficient cabling for even 4-way setups. The source mentions the unit to be contract-manufactured by Delta Electronics, for Antec. More pictures of this "juicy" PSU at the source.
Source: Lab501.ro

Related News

Add your own comment

20 Comments on Antec High Current Pro Platinum 1000W PSU Pictured

#1
treboRR
showoff.....Look @ my capacitors man! :D
Posted on Reply
#2
R_1
Nice capacitors you have! :)
Posted on Reply
#4
Kaynar
It is a great idea from Antec to put a glass panel on the top of a PSU. It is good to see that they have the confidence to show a high quality product with a clean presentation.
Posted on Reply
#5
Enmity
problem with this is im sure it'll overheat and explode, needs some airflow. Looks awesome though :)


Edit: nvm, re read btas newspost and the retail version will have the fan. I Take it back, this looks like a nice psu :)
Posted on Reply
#7
specks
Enmityproblem with this is im sure it'll overheat and explode, needs some airflow. Looks awesome though :)


Edit: nvm, re read btas newspost and the retail version will have the fan. I Take it back, this looks like a nice psu :)
hhumaswhere is fan ??
Relax, its just a show off. The ones on the market will have a fan.
Posted on Reply
#8
1c3d0g
This one should be good match-up vs the Seasonic 1000W Platinum PSU.
Posted on Reply
#9
Bjorn_Of_Iceland
Shame its just for demo.. I kinda like the see through acrylic though ^^
Posted on Reply
#10
m1dg3t
OOOH acrylic PSU case's! The '90's are back! lol

What's the deal with 4 12v rail's? I always thought a single rail was more stable/robust :confused: I've always used single rail PSU's, but then again i've always used single GFX card as well....
Posted on Reply
#11
trickson
OH, I have such a headache
Psst.. I can see your capacitors.. :o
Posted on Reply
#12
Frick
Fishfaced Nincompoop
m1dg3tOOOH acrylic PSU case's! The '90's are back! lol

What's the deal with 4 12v rail's? I always thought a single rail was more stable/robust :confused: I've always used single rail PSU's, but then again i've always used single GFX card as well....
It all depends on how it's done. And too much amps on a single rail can cause somebad stuff (almost the bottom). That's why we want it reviewed. :D
Posted on Reply
#13
radrok
FrickIt all depends on how it's done. And too much amps on a single rail can cause somebad stuff (almost the bottom). That's why we want it reviewed. :D
I've been concerned too about such big and powerful single 12v rails
Posted on Reply
#15
btarunr
Editor & Senior Moderator
hhumaswhere is fan ??
m1dg3tOOOH acrylic PSU case's! The '90's are back! lol
Posted on Reply
#17
bear jesus
btarunri.imgur.com/FzVQr.jpg
The only reason i came in here after reading it was to say i wish the retail version could look like that display model and i see half the comments thinking it is the retail model.:banghead: It looks like over a quarter of the text in the article is about that one detail :laugh:
btarunrAntec showed off the High Current Pro (HCP) Platinum 1000W PSU, at CeBIT. The HCP Platinum is an 80 Plus Platinum-compliant variant of the original High Current Pro launched in 2010, which were 80 Plus Gold-compliant. Antec's exhibit featured a special body retrofitted with acrylic windows so visitors could see its innards, the retail version will obviously have a full-metal body, and a 135 mm fan in its right place, to keep the unit cool. The HCP Platinum 1000W features a quad-12V rail design, with four 40A rails. The unit features completely modular cabling, including for the 24-pin ATX and dual 8-pin EPS connectors. There's sufficient cabling for even 4-way setups. The source mentions the unit to be contract-manufactured by Delta Electronics, for Antec. More pictures of this "juicy" PSU at the source.
I think the display model does look really good and i would happily mod that in to a working model by adding vents to the side and fans to the back, i know i could do that to any PSU but the less work the better as i am lazy :laugh:.
Posted on Reply
#18
m1dg3t
Any word on pricing for this unit? I'm guessing it will be on the high end, just as their current top spec unit's are
m1dg3t]OOOH acrylic PSU case's! The '90's are back! lol[/QUOTE] [QUOTE=btarunri.imgur.com/FzVQr.jp
:laugh: Can you make one that say's "New's man why you no see sarcasm in post?" :p
Posted on Reply
#20
Goodman
Nice PSU & a total of 83amps for the 12v rails , that is 23amps more than my 750w PSU on the 12v rail

Makes me wonder how much more amps a board can take on the 12v rail before it blows out?
Posted on Reply
Add your own comment
Nov 22nd, 2024 12:24 EST change timezone

Latest GPU Drivers

New Forum Posts

Popular Reviews

Controversial News Posts