Monday, October 20th 2014

Cooltek Intros GT-03 ATX Mid-tower Case

Cooltek rolled out the GT-03, an ATX mid-tower case that looks heavily inspired by some of the recent works of SilverStone, such as the Raven RV-05. Where it falters is the use of SECC steel and matte ABS plastic, instead of aluminium. Measuring 510 mm x 200 mm x 460 mm (DxWxH), the case dry-weighs 5.2 kg. Its front panel features a 'shield'-shaped cover over its three 5.25-inch drive bays, of which two are usable, with the third being an exposed 3.5-inch bay with a clip-lock protrusion of the door. Other front-panel features include a SATA drive dock, two each of USB 3.0 and USB 2.0/1.1 ports, and standard HD audio jacks.

Internally, the GT-03 has room for CPU coolers as tall as 152 mm, and graphics cards as long as 300 mm. Internal storage areas include three 2.5-inch, and four 3.5-inch drive bays. The motherboard tray has cutouts at all the right places. Installation, for the most part, appears tool-free. Ventilation includes two 120 mm front intakes, a 120 mm rear exhaust, and two 120 mm top exhausts. The case is now selling for 44.99€.
Add your own comment

11 Comments on Cooltek Intros GT-03 ATX Mid-tower Case

#2
micropage7
the internal parts is ok but too much plastic on top and front bezel
Posted on Reply
#3
dj-electric
ZoneDymoSilverstone look-a-like
I would say it's more of an NZXT phantom look-a-like.
Maybe both.

It's a not-ogirinal-look-a-like
Posted on Reply
#4
RCoon
Dj-ElectriCI would say it's more of an NZXT phantom look-a-like.
Maybe both.

It's a not-ogirinal-look-a-like
Phantom and Raven had a messy night in Vegas it looks like.
Posted on Reply
#5
荷兰大母猪
Why so many brand copy nzxt.... I think phantom is a terrible case... I had it before and it was a really bad case
Posted on Reply
#6
Mistral
So, they had the ballz to copy the exterior of the Raven, but lacked the guts to go all the way and nick the interior as well?

Not cool, Cooltek, not cool...
Posted on Reply
#7
AsRock
TPU addict
More same old same old, like the rest they always have near enough the same setup. Once a company put the PSU at the bottom they all had to do it and i am still waiting for one of them to put the PSU top \ sideways as this would take the PSU away from a possible hot area and make it really simple to clean the dust from..

In the end same old shit with included drive bays that look if not effect good air flow.
Posted on Reply
#8
荷兰大母猪
AsRockMore same old same old, like the rest they always have near enough the same setup. Once a company put the PSU at the bottom they all had to do it and i am still waiting for one of them to put the PSU top \ sideways as this would take the PSU away from a possible hot area and make it really simple to clean the dust from..

In the end same old shit with included drive bays that look if not effect good air flow.
Basically I know what u are talking about... forgive me something I can't understand....in Eng....
Posted on Reply
#9
INSTG8R
Vanguard Beta Tester
AsRockMore same old same old, like the rest they always have near enough the same setup. Once a company put the PSU at the bottom they all had to do it and i am still waiting for one of them to put the PSU top \ sideways as this would take the PSU away from a possible hot area and make it really simple to clean the dust from..

In the end same old shit with included drive bays that look if not effect good air flow.
My VERY old TT Kandalf has it's PSU Top/Sideways ;)
Posted on Reply
#10
AsRock
TPU addict
INSTG8RMy VERY old TT Kandalf has it's PSU Top/Sideways ;)
My TT Armor case does too how ever when one or more companys decided to start to put the psu at the bottom most started to do it. Now all TT had to do was to make a vent on the right side of the case with a magnet filter and you would have it as easy as it gets.
www.newegg.com/Product/Product.aspx?Item=N82E16811133154

And yes i have thought of added it my self lol. Mines at the rear sideways at the side of a 3 HDD and the side of a 90mm fan.

Now TT just make total crap these days just lost the plot like most have and just find it easier to just be sheep like most of them now.

I improved the drive bays to by removing any thing that i could that could effect the air flow too.
Posted on Reply
#11
INSTG8R
Vanguard Beta Tester
Yeah the Kandalf and Armor were the "same case" on the insides.
Posted on Reply
Add your own comment
Dec 26th, 2024 16:30 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts