Sunday, January 11th 2015
Plextor M7e M.2 PCIe SSD Tested, Over 1.3 GB/s On Tap
Plextor showed off its upcoming M7e PCI-Express SSD in the M.2 form-factor, at CES. A successor to the M6e, which was designed to offer 770 MB/s sequential reads, with up to 580 MB/s sequential writes; the new M7e offers double the performance. Although Plextor didn't put out its own manufacturer-rated numbers, the drive was put through CrystalDiskMark on a live-demo, and compared to its nearest market rival, Samsung XP941.
Built around a Marvell 88SS9293 controller, with PCI-Express 2.0 x4 bus interface, the drive features Toshiba A19 MLC NAND flash chips. The drive was tested to offer 1411 MB/s sequential reads, with 1028 MB/s writes; compared to the 1136 MB/s reads and 928 MB/s writes, put out by the Samsung XP941. With these numbers, the drive is targeted at PC enthusiasts. It will be sold both as a bare drive, and with a PCI-Express 2.0 x4 add-on card, with an M.2 riser.
Source:
LegitReviews
Built around a Marvell 88SS9293 controller, with PCI-Express 2.0 x4 bus interface, the drive features Toshiba A19 MLC NAND flash chips. The drive was tested to offer 1411 MB/s sequential reads, with 1028 MB/s writes; compared to the 1136 MB/s reads and 928 MB/s writes, put out by the Samsung XP941. With these numbers, the drive is targeted at PC enthusiasts. It will be sold both as a bare drive, and with a PCI-Express 2.0 x4 add-on card, with an M.2 riser.
9 Comments on Plextor M7e M.2 PCIe SSD Tested, Over 1.3 GB/s On Tap
I just want move up in capacity (have 128GB M4) and form (no wires). Any performance gains are just icing :)