Tuesday, July 21st 2015
Cool Both Your CPU and GPU with ID-Cooling Hunter Duet AIO Cooler
ID-COOLING officially releases the world's first integrated AIO water cooler for CPU & GPU with one radiator two pumps design, named HUNTER DUET. Along with this cooler, ID-COOLING is going to launch a full product line of water cooling under FROSTFLOW series.
HUNTER DUET is equipped with a 240 mm radiator mounted with a pair of SF-12025 high static pressure fans. Fan speed is PWM controlled from 800 to 2000RPM, pushing max. airflow of 84.5CFM each. On four corners are mounted with rubber dampeners to absorb operating vibration.
The pumps are designed with comet-tail LED lighting on the top. Bearing type is Ceramic bearing and the pump speed is set at 2500RPM. Copper base contacts CPU/GPU to help the heat transfer. Micro fin submerged design increases the heat dissipation surface. The dimension of the whole water block is Ф65×36mm.
EPDM Rubber tubes connected water blocks and radiator together. From CPU water block to GPU block, tube length is 250mm; GPU to radiator, 380mm; radiator to CPU, 250mm. Inside tubes is self-contained highly efficient and eco-friendly liquid coolant.
Universal mounting brackets are included. HUNTER DUET is compatible with (CPU) Intel LGA2011/1366/1150/1155/1156/775 & AMD FM2+/FM2/FM1/AM3(+)/AM2(+). For GPU, the mounting kit supports mounting holes 58.4*58.4mm; 53.3*53.3mm; 51*61mm.
The MSRP for HUNTER DUET is $139.99.
HUNTER DUET is equipped with a 240 mm radiator mounted with a pair of SF-12025 high static pressure fans. Fan speed is PWM controlled from 800 to 2000RPM, pushing max. airflow of 84.5CFM each. On four corners are mounted with rubber dampeners to absorb operating vibration.
EPDM Rubber tubes connected water blocks and radiator together. From CPU water block to GPU block, tube length is 250mm; GPU to radiator, 380mm; radiator to CPU, 250mm. Inside tubes is self-contained highly efficient and eco-friendly liquid coolant.
Universal mounting brackets are included. HUNTER DUET is compatible with (CPU) Intel LGA2011/1366/1150/1155/1156/775 & AMD FM2+/FM2/FM1/AM3(+)/AM2(+). For GPU, the mounting kit supports mounting holes 58.4*58.4mm; 53.3*53.3mm; 51*61mm.
The MSRP for HUNTER DUET is $139.99.
34 Comments on Cool Both Your CPU and GPU with ID-Cooling Hunter Duet AIO Cooler
one loop for processor and vga card
looks like we need some review
Appreciate at least some innovation.
Besides, this product is targeted at the vast majority of people who don't do multi-GPU.
Also I see that the GPU portion plugs into the MoBo , and Not the GPU PCB...I HOPE that doesn't mean lack of Control of Pump/Fan speed...Seems like a bad design choice, unless it goes into the card OR into the MoBo. because who would want it running into theyre motherboard?
Nice to see the idea implemented in an AIO market tho...atleast its my first time seeing it in the AIO field.
I don't think this should have a problem with 1x i7-5930K + 1x GTX 980 Ti.
or a X99 + a 980Ti as @btarunr wrote ... but no OC ...
rule of rad is 120mm per block ... so a 240 is correct at this time
the nzxt g10 and vrm cooking hg10 showed how well good aio can cool a gpu. i am a little concerned about that rad if it was paired with a hot intel or amd cpu and high end gpu like the 390 or 980ti as that is a lot of combined heat.
but with the right rad and fan combo these could really take over the custom pc scene. no more will we be a wash with h100 but every system will soon look like these.