Friday, July 31st 2015

EVGA Announces the X99 Micro2 Motherboard

The EVGA X99 Micro2 takes all the great features from the EVGA X99 Micro motherboard, and upgrades it with USB 3.1 Type-C, increased SATA ports, improved layout design + BIOS and refreshed look. The EVGA X99 Micro2 offers a stunning set of features and overclocking support, along with EVGA's new GUI BIOS that focuses on the best overclocking support, functionality, and usability.

Get your PC future proof ready with the EVGA X99 Micro2 motherboard. This motherboard features the next generation USB 3.1 Type-C connector that delivers transfer speeds of up to 10Gb/s for unbelievable performance. Compact mATX form factor at 9.6in x 9.6in, yet still allows for enthusiast features such as SLI, robust SATA 6G expandability, M.2 support, incredible overclocking and more.
Features:
  • Intel X99 Express Chipset
  • Up to 3-Way SLI Support
  • mATX Form Factor
  • Highly Efficient 6-Phase Digital VRM
  • Onboard Power, Reset and Clear CMOS
  • Onboard CPU Temperature Monitor
  • Black Nickel CPU ILM
  • Built in USB 3.1 Type-C Port
  • 10x SATA 6G Ports
  • Audio Isolation for Superior Sound
  • M.2 Socket M Supports up to 32Gbps
Learn more about the EVGA X99 Micro2 motherboard here.
Add your own comment

10 Comments on EVGA Announces the X99 Micro2 Motherboard

#1
awesomesauce
usb-c is great but behind a motherboard? dont know isnt is suppose to be on a case?! :banghead: i mean it pretty hard to reach or u get a cable alway connected.

still x99mini is alway great board. :rockout::toast:
Posted on Reply
#2
Toothless
Tech, Games, and TPU!
3-way SLI? Get some PCI extenders for that goodness.
Posted on Reply
#3
GorbazTheDragon
The fact that EVGA still refuses to put sata express on their boards is starting to piss me off...
Posted on Reply
#4
Chaitanya
GorbazTheDragonThe fact that EVGA still refuses to put sata express on their boards is starting to piss me off...
I dont mind missing Sata express ports as devices using SATA Express are like unicrons or big foot. As long as Evga keeps the price of this board to a reasonable level, I think that is a really good motherboard.
Posted on Reply
#5
AsRock
TPU addict
I like the finish on the heatsinks but that's about it really, then again not much for micro motherboards so.
Posted on Reply
#6
ZeDestructor
GorbazTheDragonThe fact that EVGA still refuses to put sata express on their boards is starting to piss me off...
ChaitanyaI dont mind missing Sata express ports as devices using SATA Express are like unicrons or big foot. As long as Evga keeps the price of this board to a reasonable level, I think that is a really good motherboard.
SATA Express has been all but completely passed on - it was simply too much faff (loss of SATA ports, mux complexity) for too little benefit (only 2x PCIe).

M.2 x4 or U.2 (SFF-8639) x4 is where all the fun NVMe is at, especially considering SFF-8639 cables can do both PCIe x4 and dual-ported SAS/SATA using the same connector, a godsend on machines with hotswap bays, and since there is no pin-sharing on SFF-8639 (unlike SATA Express), you only need to do some mechanical wiring to seperate the two, no muxers needed.
Posted on Reply
#7
bogami
99 chipset and slot went again for M2 plugin. Well maybe we could done accessory M2 slot with PCI-E insert.! but we know that you gets on the market PCI-E x8 M2 carrierfor for $ 28$.
Posted on Reply
#8
Vlada011
Nice motherboard... I like X99 Micro 2 as well.
M.2 transfer up to 32Gb/s, USB 3.1 Internal, x16 - x16 SLI with 40 lanes processors.
I look something, people in USA are capable to build X99 platform for arround 650$.
i7-5820K cost 299$ in Micro Center, X99 Micro 2, 225$, GSkill DDR4 2800 4x4 140$.
If something miss that and decide to buy i7-4790K with Maximus 7 Formula or Skylake with 8 Extreme than I have no words...
People still think that DDR4 is far more expensive... But if you compare good kits DDR3 with good DDR4 kits even faster, you will see very small difference.
In some cases DDR3 is more expensive. And 28 lanes is better than 16, 6 core and flux solder is better than 4 cores and thermal paste, Quad Channel DDR4 is better than Dual DDR3...
Posted on Reply
#9
Ruru
S.T.A.R.S.
GorbazTheDragonThe fact that EVGA still refuses to put sata express on their boards is starting to piss me off...
I don't even know exactly what SATA Express is, so I guess I won't need it, and haven't heard from anyone that a motherboard should have that connector.
Posted on Reply
#10
ZeDestructor
9700 ProI don't even know exactly what SATA Express is, so I guess I won't need it, and haven't heard from anyone that a motherboard should have that connector.
It's basically a PCIe 2x connection using two SATA ports and another, third "extension" (for the sideband + RefClk) plus power. Compared to SFF-8639/U.2 or M.2, it's crap, and nobody has released a SATA Express SSD to my knowledge.
Posted on Reply
Nov 5th, 2024 01:25 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts