Downloads:
84,326 (10.3 GB)
Operating
System:
9x/2000/XP/64-bit/Vista
Real Temp 2.60
RealTemp is a temperature monitoring program designed for all Intel single Core, dual Core and quad Core processors. Each core on these processors has a digital thermal sensor (DTS) that reports temperature data relative to TjMax which is the safe maximum operating core temperature for the CPU. As your CPU heats up, your Distance to TjMax will decrease. If it reaches zero your processor will start to throttle or slow down so obviously maximizing your distance away from TjMax will help your computer to run at full speed and more reliably too.
Revision History
2.60
- Added a new Settings screen where all adjustments can be made in real time including TjMax.
- Temperatures of any core are now displayed in the System Tray area.
- 4 font options for the System Tray.
- Choice of Current, Minimum, Maximum or Average termperature displayed in the System Tray.
- Test Sensors feature improved to increase repeatability.
- CPU real time MHz calculation was re-worked for better SetFSB / ClockGen support.
- Calibration options now include one digit after the decimal point for finer adjustments.
- Experimental Gamer Mode introduced which allows core temperatures to be seen in some games.
2.5
- Added minimize to System Tray support.
- Correctly reports CPU MHz for the new 45nm processors.
- Displays CPU voltage identification (VID).
- Start minimized option and now opens and closes in the same location.
2.41
- Adjustable Idle calibration for each core and expanded to plus or minus 3.
- Adjustable TjMax for each core.
- Log interval options expanded.
- A change of timers used for the benchmark feature to better support overclocking from within Windows.
- Reset button added to the gui to reset minimum and maximum temperatures.
- Better support of the ENTER and Tab keys.
Screenshot
Return to Downloads Home | Return to Category Index
