- Joined
- Nov 1, 2008
- Messages
- 4,213 (0.72/day)
- Location
- Vietnam
| System Name | Gaming System / HTPC-Server |
|---|---|
| Processor | i7 8700K (@4.8 Ghz All-Core) / R7 5900X |
| Motherboard | Z370 Aorus Ultra Gaming / MSI B450 Mortar Max |
| Cooling | CM ML360 / CM ML240L |
| Memory | 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz |
| Video Card(s) | Zotac 3080 / Colorful 1060 |
| Storage | 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe |
| Display(s) | LG 27GN800-B 27'' 2K 144Hz / Sony TV |
| Case | Xigmatek Aquarius Plus / Corsair Air 240 |
| Audio Device(s) | On Board Realtek |
| Power Supply | Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum |
| Mouse | Logitech G502 Hero / K400+ |
| Keyboard | Wooting Two / K400+ |
| Software | Windows 10 x64 |
| Benchmark Scores | Cinebench R15 = 1542 3D Mark Timespy = 9758 |
Fianlly, i've managed to hit the magic 4.5ghz mark, stable with decent temps.
Voltage is at 1.5v (1.48 real) and temps are 68-71C at load.
And all it took were a few ghetto mods
I Just bought a OCZ fan set for my ram and i tore an old 90mm fan off my ol'hyper TX 2 and attached it it my V8.
Please ignore all the dust as i'm a smoker :shadedshu, i don't have the patience to clean every week
Notice the excellent cable management - all those little bastards have been tactically pushed to the bottom of the case creating better airflow. You can also see the little orange and blue ugly thing attached to the NB, this was to stop me from burning my finger if it accidentally touched it, now i only end up with cuts, as that thing is 7500rpm, much less painful
But seriously, i can't buy any kind of fan controller where i live and my case is so tiny there isn;t a hope of tidying that crap up.
And finally from the front - notice the off placement of the 120mm fan. this is because i used velcro to attach it as i didn't know where to buy cable ties when i put it in (still don;t but i managed to steal a few from a computer shop)
What'd you think? Next i'm going to replace the multicolour 120mm wobbley side exhaust fan with something ...... Then on to a bigger case ..... next maybe WC, i think i'm about as far as i can go on air.
Voltage is at 1.5v (1.48 real) and temps are 68-71C at load.
And all it took were a few ghetto mods
I Just bought a OCZ fan set for my ram and i tore an old 90mm fan off my ol'hyper TX 2 and attached it it my V8.
Please ignore all the dust as i'm a smoker :shadedshu, i don't have the patience to clean every week
Notice the excellent cable management - all those little bastards have been tactically pushed to the bottom of the case creating better airflow. You can also see the little orange and blue ugly thing attached to the NB, this was to stop me from burning my finger if it accidentally touched it, now i only end up with cuts, as that thing is 7500rpm, much less painful
But seriously, i can't buy any kind of fan controller where i live and my case is so tiny there isn;t a hope of tidying that crap up.
And finally from the front - notice the off placement of the 120mm fan. this is because i used velcro to attach it as i didn't know where to buy cable ties when i put it in (still don;t but i managed to steal a few from a computer shop)
What'd you think? Next i'm going to replace the multicolour 120mm wobbley side exhaust fan with something ...... Then on to a bigger case ..... next maybe WC, i think i'm about as far as i can go on air.
Last edited:
