• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Ghetto Mods

Turned one of my 5870's into a single slot:
DSCN0186.jpg

DSCN0185-1.jpg
 
Talk about making full use of your electricity! This guy is bitcoin mining, but it could be done for F@H too obviously :)

sturle said:
Another thing: WAF!

I have a liquid cooled miner.* It is dead silent,* but the main point is that it heats our bathroom floor.* Pictures says more than words, so I attached a few.

computer.jpg
My computer. An oldish Athlon64 X2 in a cabinet from a previous century.* Sorry about the mess.* The cabinet is usually closed for optimal airflow.* You see the water tube entering at the bottom, water passing through the 5970 water block (the shop were sold out of nipples fitting my tubing, and put in some 1/2" tubing and adapters, so it is a bit messy in there), then through my CPU block before heated water leaves at the top.* The direction has a purpose.* If I start the computer with no pump, the water will flow by itself due to convection.* Convection isn't enough for cooling the 5970 as well, so the pump must be running when mining.* And compare the size of the stock cooler in the lower right corner with the water block.* The card is now half as thick, and the PCI socket next to it is usable again!

tubes.jpg
Tubes going up through the roof above.* This is not finished.* I'll make better connectors closer to the ceiling and box them in later.* The thing on the tube to the right is a flow indicator.* The cable coming out of the same hole and going to a RJ45 socket (not connected yet), connects a series of temperature sensors embedded in the floor and walls, and a temperature and humidity sensor next to the fan in the bathroom.

floor.jpg
Tubes under my bathroom floor and one of the temperature sensors (inside a blue shrink hose).* This is now buried in cement and covered with nice tiles.

reserator.jpg
Reservoir where the water returns.* Inside there is a small pump (300 l/min, 0.5m head), which keeps the water flow going and bubbles out of the tubes.* Water level inside here is 0-level.* In the tubes above the water level in the reservoir, there is actually a vacuum, and the water pressure inside my computer is low.

The best thing about my water cooling and floor heating is that my wife keeps nagging me to buy a second 5970 to make the floor warmer.* Beat this with a air cooled system. :-)

SOURCE
 
Tubes under my bathroom floor and one of the temperature sensors (inside a blue shrink hose).* This is now buried in cement and covered with nice tiles.
awesome mod.......are the tubes plastic?,,they look plastic,,,,i mean copper or other metal would conduct heat much better,,,but u probably thought of that,,,,im curious
_______________________
cpidtagb.php

antec1200 filter mod | 4x4 Best off road games
 
Talk about making full use of your electricity! This guy is bitcoin mining, but it could be done for F@H too obviously :)



SOURCE

surly that wouldn't generate enough heat to actually warm a floor?
 
lol the fan on psu?
 
surly that wouldn't generate enough heat to actually warm a floor?

Floors are pretty could, so it would definitively help bring it closer to room temperature, which makes a huge difference... also, the area is pretty small
 
wow i forgot about this thread... heh if this was a car forum i'd have loads of stuff. My most recent ghetto mod is with an xbox360, i'll post it during the day... as my phone has no flash and it sucks when it comes to picking up light.
 
i'll post it during the day... as my phone has no flash and it sucks when it comes to picking up light.

quite strange to hear that as its brigh sunny daylight over here, 8:35am to be precise
 
haha i know what you mean... its odd watching live videos from japan and it be only 11am and its like 4am here (actually right now its 4:47am)
 
haha i know what you mean... its odd watching live videos from japan and it be only 11am and its like 4am here (actually right now its 4:47am)

4.47? hmm im from the future :P

bet thats how they got the idea for terminator
 
I think it could be the "10 p eraser" :laugh:

:D Yeah me too...I am staring @ the pic.:twitch: zooming in/out & I cant find anything "ghetto" besides the obvious fan & eraser:confused:

//Dog
 
x_a3f1621f.jpg
x_1afcfd36.jpg

Zalman VF1000 took out the inside fan and attached two 80mm fans with spacers(fan brackets from an old case),,temps around 15c lower on average vs stock cooler
 
http://img.techpowerup.org/110318/x_a3f1621f.jpghttp://img.techpowerup.org/110318/x_1afcfd36.jpg
Zalman VF1000 took out the inside fan and attached two 80mm fans with spacers(fan brackets from an old case),,temps around 15c lower on average vs stock cooler

if you had sleeved the cables, and attached the cooler by glueing it/cutting a small piece out of the VF-1000 on each side where the clips should attach, it wouldnt even belong in ghetto mods, but in sexy hardware, i guess;)
 
The PCI bracket on my 5970 is buggered. It will never go all the way in due to the case design. And Ive bored the screw holes in previous attempts to force it in.

dscf0213k.jpg


SOLUTION?

dscf0214f.jpg


Those cheap crappy games came in handy!
 
The PCI bracket on my 5970 is buggered. It will never go all the way in due to the case design. And Ive bored the screw holes in previous attempts to force it in.

http://img825.imageshack.us/img825/6766/dscf0213k.jpg

SOLUTION?

http://img816.imageshack.us/img816/8915/dscf0214f.jpg

Those cheap crappy games came in handy!

When that has happened to me I just push the back of the case in a bit and it moves enough so that it allows you to start screwing in the screw. Once it's in, that's it.
 
When that has happened to me I just push the back of the case in a bit and it moves enough so that it allows you to start screwing in the screw. Once it's in, that's it.

Thats my older PC It holds probably 1TB/4.3TB of downloads.
 
... i've been too busy working on the cars lately

@l33tGaMeR: have you tried zipties?
 
zipties = gifts from god:pimp:
 
Back
Top