TPU's WCG/BOINC Team

HammerON · Oct 28, 2012

Following Kiex's guide to multiple WU's for gpu's I was able to get it running last night. Both GPU's were working on two WU's (+CPU).
When I got up this morning and checked I had no Tasks showing. Restarted the computer and this is what I see in the Event Log:

Any ideas???

BUCK NASTY · Oct 28, 2012

HammerON said:
Following Kiex's guide to multiple WU's for gpu's I was able to get it running last night. Both GPU's were working on two WU's (+CPU).
When I got up this morning and checked I had no Tasks showing. Restarted the computer and this is what I see in the Event Log:
http://img.techpowerup.org/121028/Capture072.jpg

Any ideas???

That's the same prob I had the 1st night i tried it. I know of no fix yet.

HammerON · Oct 28, 2012

Thanks Buck. That sucks.
I guess I will just re-install

KieX · Oct 28, 2012

Try assigning that computer a HCC only profile in the WCG site. Was something Mad_SHot suggested which may work.

mstenholm · Oct 28, 2012

I think we all had the problem with not having any GPU tasks but NO tasks at all!? Other then that your log looks similar to mine. I tried again to night to let one rig with a 7770 run three GPUs. So far so good (one hour in) but the past two times I tried I ran out of GPU WUs as soon as I turned my back to it. I did notice that the estimated time went from a fairly accurate number (2:27) to 43:26 and that of course will reduce the number of WUs in the buffer. I will update later.

Daimus · Oct 28, 2012

I have 2 days had the same problem - no tasks.
That's what I did:
1. deleted project in BOINC manager (all downloaded files were also deleted)
2. connected to the project WCG
3. immediately after the connection was out of the BOINC manager
4. copied the app_info file in the correct directory
5. reran manager.

Everything works fine the third day, the download task occurs immediately, no errors.

mstenholm · Oct 28, 2012

Daimus said:
I have 2 days had the same problem - no tasks.
That's what I did:
1. deleted project in BOINC manager (all downloaded files was also deleted)
2. connected to the project WCG
3. immediately after the connection was out of the BOINC manager
4. copied the app_info file in the correct directory
5. reran manager.

Everything works fine the third day, the download task occurs immediately, no errors.

I tried that as well after after my first problem but it didn't work for me. Running only HFC might be the solution for some. I still run a GFAM/HFC mix...

Daimus · Oct 28, 2012

mstenholm said:
I tried that as well after after my first problem but it didn't work for me. Running only HFC might be the solution for some. I still run a GFAM/HFC mix...

Indeed I'm running HCC GPU tasks only on this cruncher. Not tried mix.

ThE_MaD_ShOt · Oct 28, 2012

Yes you need to set a separate profile for the rigs that are running the app_info file on wcg site with hcc only. They way I found to get the app_info to work perfect was to.

1: Create new profile on wcg site with HCC only and make it default.
2: Attach the rig you want to crunch the app_info with to the profile
3: Uninstall Boinc/Wcg
4: Delete folder under program Data
5: reboot
6: Install Wcg Client from Wcg site.
7: Reboot
8: Attach to project and immediately set to no new task.
9: Shut down client
10: Add your app_info file
11: Restart Client
12: Allow new task
13: Reboot just because.

[Ion] · Oct 28, 2012

Well, I'm pretty sure that my ASRock P55 board is shot. I tested my CPU in my friend's P7P55D Pro and it worked, while his CPU didn't work properly in my board. In addition, some of the USB ports have gone bad.

:shadedshu

I'm looking to find a replacement--I may have found a Maximus III, which would be a solid board to use with it. A shame, as this delays any GPUs, but oh well.

The system is (somehow) up and running right now, so it'll stay crunching--but it's probably going to lock up/BSOD soon-ish.

Mindweaver · Oct 28, 2012

Well shit guys.. I've been dealing with power outages.. Most of my computers are down.. All of my UPS's are down but 2... Only my main APC 3000 va with 4 servers and my main rig and my daughters is running.. Err well 2 laptops as well... :banghead:

I'll start getting things back up tomorrow once my UPS's have recharged... :banghead:

ThE_MaD_ShOt · Oct 28, 2012

Hope you stay safe Mindweaver. We are next to get hit and they say it isn't looking good right now. Schools are already closed for tomorrow. The beach is getting hammered.

stinger608 · Oct 28, 2012

Mindweaver said:
Well shit guys.. I've been dealing with power outages.. Most of my computers are down.. All of my UPS's are down but 2... Only my main APC 3000 va with 4 servers and my main rig and my daughters is running.. Err well 2 laptops as well... I'll start getting things back up tomorrow once my UPS's have recharged...

Damn bro, that really sucks man!! Was it due to weather conditions?

I know mid to late week we had some real shitty weather. Dropped about 3" snow one night and 6 or 7 the next night. Seemed we were pretty lucky as we didn't encounter any major power outages.

:banghead:

Never mind, I totally spaced the damn Sandy hurricane.

Norton · Oct 28, 2012

Mindweaver said:
Well shit guys.. I've been dealing with power outages.. Most of my computers are down.. All of my UPS's are down but 2... Only my main APC 3000 va with 4 servers and my main rig and my daughters is running.. Err well 2 laptops as well... I'll start getting things back up tomorrow once my UPS's have recharged...

We're looking at that possibility here as Hurricane/Nor'Easter Sandy bears down on us. Will likely shut down at least the 4P rig around midnight as a precaution and hope for the best but it's looking like we're going to get hit pretty hard over the next 48 hours

[Ion] · Oct 28, 2012

Mindweaver, I'm sorry to hear about that. I'm kinda surprised though--we haven't had any inclement weather here in Raleigh :eek:

Mindweaver · Oct 28, 2012

Yea, weather is not bad here.. It's just a little windy.. I think someone hit something around here. I'll post more when I know more... Oh and yea Norton better safe than sorry.. Hopefully everyone will be safe during all the bad weather. :toast:

HammerON · Oct 28, 2012

ThE_MaD_ShOt said:
Yes you need to set a separate profile for the rigs that are running the app_info file on wcg site with hcc only. They way I found to get the app_info to work perfect was to.

1: Create new profile on wcg site with HCC only and make it default.
2: Attach the rig you want to crunch the app_info with to the profile
3: Uninstall Boinc/Wcg
4: Delete folder under program Data
5: reboot
6: Install Wcg Client from Wcg site.
7: Reboot
8: Attach to project and immediately set to no new task.
9: Shut down client
10: Add your app_info file
11: Restart Client
12: Allow new task
13: Reboot just because.

Will give it a shot when I get home from work.

ThE_MaD_ShOt · Oct 28, 2012

They have now issued a Winter Wheather Warning for us for Tuesday. My rigs are all going down tomorrow as it is supposed to get real nasty by mid morning. And when the storm hit's land and comes what they say due east we are going to get pounded again. With us being in the valley of the Mountain ranges out here if the storm gets past the one mountain range it will most likley get stuck on top of us for some time. I love living out here but sometimes I hate it to. These mountains can really screw us sometimes with weather. But we will see what happens as it gets closer to us. Right now it's just breezy outside with light rain.

BUCK NASTY · Oct 29, 2012

ThE_MaD_ShOt said:
Yes you need to set a separate profile for the rigs that are running the app_info file on wcg site with hcc only. They way I found to get the app_info to work perfect was to.

1: Create new profile on wcg site with HCC only and make it default.
2: Attach the rig you want to crunch the app_info with to the profile
3: Uninstall Boinc/Wcg
4: Delete folder under program Data
5: reboot
6: Install Wcg Client from Wcg site.
7: Reboot
8: Attach to project and immediately set to no new task.
9: Shut down client
10: Add your app_info file
11: Restart Client
12: Allow new task
13: Reboot just because.

OK, giving this app_info another go. I've cranked up another Phenom II X4 rig, but the GTX260 crapped out(it's been worked kinda hard over the last 3+ years). Just gonna run CPU until.....maybe a HD7770 shows up at the door...

. Damn, I haven't own an AMD GPU in 5+ years.

Currently running 2 GPU WU's on the GTX460. Gonna try the GTX275 in a little bit. Thanks for outlining this MaD_ShOt

[Ion] · Oct 29, 2012

Well, my AMD X2 has been offline for a few days (apparently the Lenovo BIOS halts it if there isn't a keyboard plugged in). That's now resolved, so it's up-and-crunching again :toast:

Before I commit to buying the new P55 board, do you guys have any other ideas of what I can try?

HammerON · Oct 29, 2012

ThE_MaD_ShOt said:
Yes you need to set a separate profile for the rigs that are running the app_info file on wcg site with hcc only. They way I found to get the app_info to work perfect was to.

1: Create new profile on wcg site with HCC only and make it default.
2: Attach the rig you want to crunch the app_info with to the profile
3: Uninstall Boinc/Wcg
4: Delete folder under program Data
5: reboot
6: Install Wcg Client from Wcg site.
7: Reboot
8: Attach to project and immediately set to no new task.
9: Shut down client
10: Add your app_info file
11: Restart Client
12: Allow new task
13: Reboot just because.

Didn't want to create a new profile so I just un-installed and deleted the Program Data, re-installed and back-up and running

I would try again out of curiosity however I do not have time right now

I did not like my rig not crunching for almost a whole day. Think of the dying puppies (old WCG TPU thing)!!!

ThE_MaD_ShOt · Oct 29, 2012

HammerON said:
Didn't want to create a new profile so I just un-installed and deleted the Program Data, re-installed and back-up and running
http://img.techpowerup.org/121029/Capture073.jpg

I would try again out of curiosity however I do not have time right now
I did not like my rig not crunching for almost a whole day. Think of the dying puppies (old WCG TPU thing)!!!

it's not a new account, under device manager on wcg's site create a new device profile and in that profile only have hcc checked. Point rig running the app_info file to that profile. You do all this on the WCG site. You keep your same account and that rig will not lose it's stats. Your just changing what it crunches so that you won't get the errors from wcg site trying to load other projects to it and the app_info kicking them out. Which I believe is causing the rigs to stall out.

da_vid · Oct 29, 2012

Swiftech mcp 355 pump is still good, or I could get better for the same price(under 100$ can)
I'm looking for a low profile pump (haf 912 not so much room for a big pump like the mcp 655)
I'm using 2x 240mm swiftech rad and a Apogee HD waterblock

Thansk for your advice

Mindweaver · Oct 29, 2012

Finally everything is back up and crunching! :toast:

Tough night and morning... :toast:

[Ion] · Oct 29, 2012

Mindweaver said:
Finally everything is back up and crunching! Tough night and morning...

Glad to her that you have things going again! :toast:

The worst of the weather we've received here is a bit of rain--I'm surprised that you have more further inland TBH.

System Name	Aki
Processor	AMD 7800X3D
Motherboard	ASUS ROG STRIX X670E-A
Cooling	MSI MAG CoreLiquid E360
Memory	Patriot Viper Elite 5 32GB 6200
Video Card(s)	PNY RTX 4090 XLR8
Storage	Samsung 960 Pro 512 GB + WD Black SN850 1TB
Display(s)	Dell 32" Curved Gaming Monitor (S3220DGF)
Case	Corsair 5000D Airflow
Audio Device(s)	On-board
Power Supply	EVGA SuperNOVA 1000 G5
Mouse	Roccat Kone Pure
Keyboard	ASUS ROG Strix Scope II Wireless
Software	Win 11 Pro
Benchmark Scores	Always changing~

System Name	Main Rig
Processor	AMD RYZEN 5600X
Motherboard	MSI MPG X570 GAMING EDGE WIFI
Cooling	CORSAIR H115i
Memory	16gb DDR4 @ 1200MHZ
Video Card(s)	GIGABYTE RTX 4080 SUPER
Storage	SAMSUNG M.2 1TB
Display(s)	ASUS 24" IPS
Case	Coolermaster Centurion 590
Audio Device(s)	Onboard
Power Supply	EVGA SUPERNOVA 1000
Software	Windows 10 64

System Name	Aki
Processor	AMD 7800X3D
Motherboard	ASUS ROG STRIX X670E-A
Cooling	MSI MAG CoreLiquid E360
Memory	Patriot Viper Elite 5 32GB 6200
Video Card(s)	PNY RTX 4090 XLR8
Storage	Samsung 960 Pro 512 GB + WD Black SN850 1TB
Display(s)	Dell 32" Curved Gaming Monitor (S3220DGF)
Case	Corsair 5000D Airflow
Audio Device(s)	On-board
Power Supply	EVGA SuperNOVA 1000 G5
Mouse	Roccat Kone Pure
Keyboard	ASUS ROG Strix Scope II Wireless
Software	Win 11 Pro
Benchmark Scores	Always changing~

System Name	Slick
Processor	Intel i5 2467M
Motherboard	Samsung Series 5 Ultrabook
Memory	8GB Corsair Value
Storage	Crucial M4 7mm 256GB
Display(s)	13"
Software	Windows 8 Pro x64

System Name	The work PC /2700x/5950x
Processor	3900X stock/ 2700x stock/ 5950x 4200 MHz fixed @ 1,056-1,08V
Motherboard	Gigabyte AORUS Master X570/2xMSI X470 M7 AC
Cooling	Custom WC XSPC RX480, Laing DDC, XSPC Laing DDC Top V3 and EK Velocity/NH15/NH-U12S SE
Memory	32 GB Viper 3600/14 /16 GB Trident Z F4-4000C18D-16GTZSW 3600 /32 GB G Skill Flare CL14 3400
Video Card(s)	2070 Super X MSI/GTX 970 MSI/ GTX 970 MSI
Storage	1 TB SSD+500 GB NVMe / 500 GB SSD/ 2 TB 990 Pro
Display(s)	Dell UltraSharp U2518D/2408WFP
Case	Corsair 800D / Lian test bench/NZXT 500
Power Supply	AX 850 Titanium/AX 860i/AX 760
Software	Dual boot/Win 10 / Linux / Win 10+Linux

System Name	Cruncher
Processor	AMD FX-8370
Motherboard	Asus Crosshair V Formula
Cooling	Thermalright Silver Arrow SB-E
Memory	2x4 GB Corsair XMS3 2000
Video Card(s)	Sapphire HD7870+Powercolor HD7850 CrossFire
Storage	Corsair ForceGT 90 SSD,WD Black 500
Display(s)	Acer 24'' 2ms
Case	Cooler Master HAF 932
Audio Device(s)	onboard
Power Supply	Thermaltake Grand 1050w 80+Gold
Software	Win 7 SP1 Ult x64

System Name	Agent Texas / Selene / Eve
Processor	Ryzen7 5800x / Fx 8350 / Fx 8350
Motherboard	Gigabyte B550 Aorus Elite Ax V2 / Gigabyte 990FXA-UD3 r4.0 / Msi 970a Krait
Cooling	Msi Mag Core liquid / H100i / Cryo-pc Cooler
Memory	2 x32 GB Gskil Ripjaws v series / 4x 8gb G.Skill Snipers / 2x 8gb G.Skill Ripjaws
Video Card(s)	Gigabyte Rx 6800xt / Msi RX580 / Gigabyte R9 290x
Storage	1tb M.2, 2tb wd / 500 gb ssd, 2x 2tb Wd Blacks/ 500 gb ssd, 1tb WD Black
Display(s)	Dell Ultra Sharp 2408 WFp / Hp w2207 / Sanyo tv
Case	Corsair 780t White / Raidmax Vampire / NZXT Phantom 240
Audio Device(s)	Onboard Hd Audio / Onboard Hd Audio / Onboard Hd Audio
Power Supply	Corsair Rm 850 watt / Corsair TX 850 watt / Corsair TX 750 watt
Mouse	Logitech G502 Hero / Logitech G500s / Logitech wireless
Keyboard	Corsair Strafe / Corsair k50 / Logitech wireless
Software	Win 11 pro / Win 11 pro / Win 11 pro
Benchmark Scores	What are benchmarks anyway?

System Name	Niedersachsen / Ribe / Minsk
Processor	i3 3240 / i7-3520M / 4x Opteron 6376 @ 2.86GHz
Motherboard	BIOSTAR H61M / HP Q77 / Supermicro H8QG7
Cooling	Stock / Stock / 4x 1U G34
Memory	1x8GB / 2x4GB / 4x4GB
Video Card(s)	GTX260 / Intel HD 4000 / nVidia GT310
Storage	80GB Intel SSD / 256GB Intel SSD / 2x 60GB SSD (RAID1)
Display(s)	Dell 3007 + HP 2245w / 12.1" 1366x768 / None
Case	Antec NSK3480 / HP / Supermicro 1U
Audio Device(s)	Onboard
Power Supply	Enermax 500W / HP 130W / Supermicro Gold 1400W
Keyboard	IBM Model M
Software	Windows 7 (Niedersachsen/Ribe) / Linux Mint 17.2 (Minsk)

System Name	Tower of Power / Delliverance
Processor	i7 14700K / i9-14900K
Motherboard	ASUS ROG Strix Z690-A Gaming WiFi D4 / Z690
Cooling	CM MasterLiquid ML360 Mirror ARGB Close-Loop AIO / Air
Memory	CORSAIR Vengeance LPX 32GB (2 x 16GB) DDR4 3600 / DDR5 2x 16gb
Video Card(s)	ASUS TUF Gaming GeForce RTX 4070 Ti / GeForce RTX 4080
Storage	4x Samsung 980 Pro 1TB M.2, 2x Crucial 1TB SSD / NVM3 PC801 SK hynix 1TB
Display(s)	Samsung 32" Odyssy G5 Gaming 144hz 1440p, 2x LG HDR 32" 60hz 4k / 2x LG HDR 32" 60hz 4k
Case	Phantek "400A" / Dell XPS 8960
Audio Device(s)	Realtek ALC4080 / Sound Blaster X1
Power Supply	Corsair RM Series RM750 / 750w
Mouse	Razer Deathadder V3 Hyperspeed Wireless / Glorious Gaming Model O 2 Wireless
Keyboard	Glorious GMMK with box-white switches / Keychron K6 pro with blue swithes
VR HMD	Quest 3 (512gb) + Rift S + HTC Vive + DK1
Software	Windows 11 Pro x64 / Windows 11 Pro x64
Benchmark Scores	Yes

System Name	Dean Machine/2020 Ryzenfall
Processor	Intel 4790K/AMD Ryzen 5800X
Motherboard	MSI 1150 Gaming mATX/Asus ROG STRIX B550-F Gaming Wifi
Cooling	Cooler Master Hyper 212 LED/SilverStone AH240 AIO
Memory	16 gigs Crucial Ballistix Tactical Tracer/32 gigs G.Skill TridentZ NEO DDR4
Video Card(s)	Gigabyte 1660 Super/EVGA GTX 1080 FTW Hybrid Gaming
Storage	Crucial SSD 256 and 2TB spinner/Dual Samsung 980 Pro M2 NVME 4.0
Display(s)	Overlord 27" 2560 x 1440
Case	Corsair Air 540
Audio Device(s)	On board
Power Supply	Seasonic modular 850 watt Platinum/EVGA T2-850 Titanium
Software	Windows 10 Pro/Windows 10 Pro

System Name	Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor	Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard	Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling	Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory	2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s)	MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage	Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s)	Main PC (2x24" Dell UltraSharp U2414H)
Case	Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s)	Logitech Z625 THX 2.1 speakers
Power Supply	EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse	G300s
Keyboard	Corsair K65
VR HMD	N/A
Software	Windows 10 Pro or Ubuntu
Benchmark Scores	Why sit on the Bench when you can get in the game and Crunch!!!

System Name	wcg under best friend name
Processor	Q9550/amd A6 3670k/6000+
Motherboard	p5q-e/asus f1a55-lx r2.0/m2n-e
Cooling	cooler master 212 evo/watercooling/stock
Memory	corsair 1066 4 gb/kingston 4Gb 1600mhz/1Gb ddr2800
Video Card(s)	2x asus hd 7770/5670/6530/5670
Storage	raptor 74 raid/wd500g/160g
Case	haf 912/antec 900/none
Power Supply	ocz 700watt/cooler master elite 460watt/ultra 400 watt
Software	win 7 x64/win 7 x64/win 7 x86

TPU's WCG/BOINC Team

The Watchful Moderator

4P Enthusiust

The Watchful Moderator

WCG Team Assistant

Moderato®™

Dedicated TPU Cruncher & Folder

Moderator - Returning from the Darkness

WCG Team Assistant

Moderato®™

The Watchful Moderator

4P Enthusiust

WCG Team Assistant

The Watchful Moderator

New Member

Moderato®™

WCG Team Assistant