• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

"Adapter not found" - blind flashing HD6950

nawe

New Member
Joined
May 29, 2011
Messages
7 (0.00/day)
I'm currently stuck with a bricked XFX HD6950 ...well, the fans work, at full blast, constantly. I bought it under the impression it was a reference card, and was indeed sold as safely flashable to a 6970 bios from OverclockersUK. Obviously I hadn't researched enough to realise when I recieved it that I was sent a revised model - I saw a little "1 and 2", and took that to mean a dual bios switch, which, to my horror, is actually physically missing :-(

Anyway, as for my current situation, OCUK have washed their hands on the whole affair (which I feel I should fight if nothing else works, they advertised it as a "bargain" due to its ability to flash, after all, and I didn't get the card I ordered), and I'm forced to try blind flashing it back to the initial bios. I used Winflash, and saved it before attempting the reflash - and Winflash detected the card, and replaced the bios, so obviously it the bios can at least be changed. I'm using a USB boot disk with DOS and atiflash, and using >> log.txt to create logs of DOS' output, since I can't see what's going on in the monitor.

I've tried all sorts of variations on "atiflash -unlockrom 0" and "atiflash -p -f 0 bios.rom", as well as simply "atiflash -i" - and every time, I get "adapter not found". I've tried versions 3.86 and 3.79, with no luck. Anyone aware of any other versions which might help, or any other commands I may have missed, before I'm forced to buy a PCI card in order to try Winflash?
 
Have you tried the script (or batch file) from the one available via TPU?

Also, are you able to boot from a different card? As in possibly installing a different card and the 6950 at the same time?

Do you have onboard gpu?
 
The script from the what, sorry?

I don't have onboard graphics, or 2 16x pcie slots, so I can't have my old card in at the same time - so if using atiflash is impossible, I'll have to get a standard PCI card and attempt to load windows with that.
 
So I bought a cheap PCI card to use, with no luck. Atiflash in DOS simply tells me "rom not erased", though it detects the card. Atiwinflash, in windows, gives me a subsystemID mismatch, and running it through command prompt, with the unlockrom command, simply causes the "flashing" progress bar to appear for a split second, then disappear without so much as an error or any kind of message.

Both seem to detect the card, strangely. Is my card dead? :-(
 
Post this in the unlock thread. Lots of people will help you....
 
Could you point me in the direction of the thread? I'm not sure which one you mean specifically.
 
Back
Top