Project "Shielding War" Mathmodding

Mod finish "Shielding War" By Mathmodding

Hi to all,

I will present my project here modding "Shielding war".

Here you can follow the progress of my mod!

My Facebook page here: https://www.facebook.com/MathModding

Sponsors: ANTEC France, Sassanou Watermod, Crucial France, Seasonic, Be Quiet, INTEL (for now).



Go here as promised information about my project mod yard!

The theme:

"Shielding War".

The case ANTEC will be fully covered with a shield or armor armor made ​​with PVC 5mm thick. The colors used are dark green / matte black.

Basically I do not care that the base frame of LanBoy Air and I'll recreate all the doors, front, above, below, in short all the way to the box a completely unique and very sober face. I'm much emphasis on the finish.

Config:

Boital: LanBoy Air (end)
Power Supply: Seasonic X650 80 + Gold Modular
Motherboard: Asus sabertooth Z77 Thermal Armor
CPU: Core i7 3770K
DDR3: 16GB Crucial Ballistix Elite CAS9
Graphics card: SLI ASUS GTX670 TOP DCUII or (a SLI GTX7xx)
Fan case: Be quiet Silent Wings 2 120
Fan watercooling: Be quiet Silent Wings 2 120 PWM
HDD: 1 SSD OCZ vertex 2 120go +1 vélociraptor 10000tr/min 300go

The watercooling is rigid tubing EK-HD Acrilyc. With one EK waterblock for CPU, 2 rad EK 240 XT, 1 Laing pump dcc 1T+.

Well, I'm still waiting for answers to some fairly large components, but most of the mod is here!

Thank you Be quiet France

Here the boital ready for more and different doors.
As for the original housing that encloses the power supply does not like me because you can not see it! He will go to him DREMEL

voilà le boital prêt pour la suite ainsi que les différentes portes.
Quant au boitier d'origine qui enferme l'alim il ne me plaît pas car on ne la voit plus! Il va passer au DREMEL lui

Tomorrow, the Dremel is smoking!

The great Alim Seasonic X650 deserves it

Demain, la Dremel va fumer!

La superbe Alim Seasonic X650 mérite bien ça

stock mesh

YOP! It's better then small finishing / paint and you're done!
For that anyway

Et hop! C'est mieux là de petites finitions/ peinture et c'est fini!
Pour ça en tout cas

Go here as promised information about my project mod yard!

The theme:

"Shielding War".

The case ANTEC will be fully covered with a shield or armor armor made ​​with PVC 5mm thick. The colors used are dark green / matte black.

Basically I do not care that the base frame of LanBoy Air and I'll recreate all the doors, front, above, below, in short all the way to the box a completely unique and very sober face. I'm much emphasis on the finish.

Config:

Boital: LanBoy Air (Modding in court)
Power Supply: Seasonic X650 80 + Gold Modular
Motherboard: Asus sabertooth Z77 Thermal Armor
CPU: Core i5 2500K 4.5GHz
DDR3: 16GB Crucial Ballistix Tactical cas8
Graphics card: ASUS GTX670 TOP DCUII or (SLI GTX7xx)
Fan case: Antec 120 True quiet white LED
Fan watercooling: Be quiet Silent Wings 2120
HDD: 1 OCZ Vertex 2 RAID0 +1 120go of Velociraptor 300GB (10000tr/min)

The watercooling is rigid tubing. With one XSPC waterblock for CPU, 1 rad EK 240 XT, 1 Laing pump dcc 1T + with a reservoir EK-DDC X-RES 140 CSQ-Acetal.

Well, I'm still waiting for answers to some fairly large components, but most of the mod is here!

and here:




and Be quiet (one of my sponsors) sends me a sound insulation of their latest range Kit (BE QUIET Thanks: P)



I did not know that was in Be quiet

History view the watercooling part! Now I have to create a support for the whole house: wink:
While the fan is mounted on silent Block!

This radiator support made ​​ALU 1mm.
This will give you an overview of the installation

these are black PVC plates 5mm thick.
it's weird plates are the same size as the door ;-)
Once I start the heavy lifting!

After a few hours of sanding: bor:
This shielding the finished door! This will give you a little idea of ​​the final result when applied to the entire case.
Are only a matte paint if I can not get the result I expect the final sanding with very fine (to see).
I will attack the holes for fixing!

Après quelques heures de ponçage
Voilà le blindage de la porte fini! Cela peu vous donnez un idée du résultat final une fois appliqué sur toute le boitier.
Ne reste plus que la peinture mat si je n'arrive pas à avoir le résultat que j'attends avec le ponçage final en très très fin (a voir).
Je vais attaquer les perçages pour la fixation!

The turn of the compartment door watercooling!
Au tour de la porte du compartiment watercooling!

This is the front!

With the sides you can get an idea of ​​the face of boital knowing that remains above me to
Standard colors, I will change the yellow to white and leave the screen as it is!

This is my first big mod, so I shit somewhere, let yourself go

Voilà la face avant!

Avec les côtés vous pouvez vous faire une idée de la tronche du boital sachant qu'il me reste le dessus à faire :wink:
Niveau couleurs, je vais changer le jaune par du blanc et laisser le blindage tel quel!

C'est mon 1er gros mod, donc je merde quelque part, lâchez-vous :izvd:

Vario said:

Awesome!

Click to expand...

Thanks

Front set fixed.
Slowly but surely!

Face avant fixé
Doucement mais surement!

The noise absorber kit be quiet! received
Thank France still strongly be quiet and follow me on "Shielding War".