• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

SATA Activity LED

S

sidewinder

New Member
Joined
Mar 27, 2008
Messages
6 (0.00/day)
Folks,

I have an eVGA 680 motherboard and have installed a HighPoint RocketRAID 3120 RAID controller. I have two Seagate Barracuda 3.5" 320GB 3GB/sec SATA drives in a RAID 1 configuration.

What I want is to see drive activity on the case mounted LED. The problem is that the RAID card headers are designed for server motherboards that have their own drive fault/activity circuitry. So, I need to find an alternate method of getting what I want.

From what I understand, the SATA power connector on newer SATA drives have a pin (pin 11?) that can be used as a drive activity source. Does anyone have any details on this? Is there a cable I can buy that has a an LED header on it that will solve my problem? Or is it not that simple?

Any help on this would be greatly appreciated!!

Thanks,

S-
 
Last edited:
choppy

choppy

Joined
Jul 18, 2007
Messages
1,172 (0.18/day)
Location
UK
System Specs
Processor Intel Core 2 Duo E7200 3.40GHz (400x8.5)
Motherboard Gigabyte GA-EP45-UD3P Rev 1.1
Cooling Xigmatek HDT-S1283
Memory 2x Crucial Ballistix DDR2 2GB 4:5 @ 500MHz 5-5-5-15
Video Card(s) Asus GTX 560Ti 1GB TOP Edition
Storage Crucial M4 128GB SSD + WD Black 500GB WD5001AALS
Display(s) Samsung P2370HD @ 1920x1080 60Hz
Case Antec 300
Audio Device(s) Soundblaster Live! 24-bit w/ Creative Inspire T6060 5.1 200W
Power Supply CoolerMaster Silent Pro Gold 600w
Software Windows 7 Professional Edition SP1 64-bit
sorry, doesnt seem like many folk know, have you tried good ol' google?
 
T

TechGuy

New Member
Joined
Apr 2, 2008
Messages
6 (0.00/day)
Location
Northeast USA
System Specs
System Name My first system - Altair (1976)
Processor 2Mhz Intel 8080
Motherboard S-100 bus chassis
Cooling One ton air conditioner
Memory Started with 1K bytes, upgraded to 4K bytes ! ~woot~
Video Card(s) Video? like in TV?
Storage ha, ha, your joking, right?
Display(s) Ever hear of LED's?
Case 210 lbs of chassis and power supply!
Audio Device(s) The system makes it's own sort of "music".
Power Supply 2000W linear +8v, used to heat house.
Software My fingers. Flip 16 switches, toggle load, repeat.
Benchmark Scores Probably could do 500K ops/sec on a cool day.
Pin 11 of the SATA power connector is officially "reserved", but some manufacturers use it as a drive activity line, while others use it for staggered drive spin-up communication.

I have a Maxtor DiamondMax 10 SATA (300GB) and some Seagate ST3500 series drives and they all support drive activity signaling on pin 11.

Hope this helps.
 
T

TechGuy

New Member
Joined
Apr 2, 2008
Messages
6 (0.00/day)
Location
Northeast USA
System Specs
System Name My first system - Altair (1976)
Processor 2Mhz Intel 8080
Motherboard S-100 bus chassis
Cooling One ton air conditioner
Memory Started with 1K bytes, upgraded to 4K bytes ! ~woot~
Video Card(s) Video? like in TV?
Storage ha, ha, your joking, right?
Display(s) Ever hear of LED's?
Case 210 lbs of chassis and power supply!
Audio Device(s) The system makes it's own sort of "music".
Power Supply 2000W linear +8v, used to heat house.
Software My fingers. Flip 16 switches, toggle load, repeat.
Benchmark Scores Probably could do 500K ops/sec on a cool day.
After reverse engineering the "special" power converter that came with my new SATA tray, it seems like the four wires that come out of the back of the SATA power connector and would normally connect to a plug at the back of the SATA tray are:

1) +12v
2) pin 11 of the SATA power connector
3) a ground pin of the sata power connector, *not* connected to all the other ground pins.
4) +5v

My guess is that the drive has an open collector output that pulls a load to ground when active, and it is brought out to pin 11 of the power connector. Note that pin 11 of the SATA power connector is supposed to be "reserved".

When the SATA drive is connected to the this "special" power converter, the floating ground is connected to all of the other grounds through the pins of the SATA drive. This alows an LED to be driven from wire #1 (+12v) to wire #3 (floating ground pin).

The drive activity LED is driven from wire #4 (+5v) to wire #2 (pin 11 of the power connector).

Of course, there are current limiting resistors for the LED's.


Soo.............

What is needed is a small circuit board with a male SATA power plug on one end and a female SATA power socket on the other. All of the pins would be carried through, meaning pin 1 to pin 1 and so forth. Pin 11, one of the grounds (not tied to the others, from the drive plug end), +12v and +5v would be brought out to a set of 2-pin headers to allow a power LED and drive activity LED to be connected. Encapsule the whole thing in rubber and sell it for $5.00.

Useage would be to plug the newly created "dongle" into the power connector of a SATA drive (or enclosure!), and plug the SATA power connector from your power supply into the dongle. Plug power LED into header labeled "power" and the drive activity LED into the header labeled "activity".

Compatibility would be limited to SATA drives that use pin 11 as a drive activity indicator line. Anyone wish to compile a compatibility list? (come on, it's a challenge!)

Any takers out there?

I'll buy 10!
 
K

kingtiger01

New Member
Joined
Dec 27, 2008
Messages
1 (0.00/day)
Ok, i know this is a old thread.

"techguy", i would consider building this according to youre schematics, if you can give me a compatibility list. so i can verify i have something to test against.

as far as price. $5.00 would have to be negotiable, due to part cost's. and shipping.
 
You must log in or register to reply here.
Top