My first p-log

hi all, I am going to be building myself another rig, I've been slowly acquiring parts. and finally saved up enough money to buy a mountan mods pinnacle case. this build will probly be a lil slow at first as i just spend my rent money on getting my truck fixed...... anyways back to the build.

I dont really have too many idea's yet on how im going to incorperate everything inside this case, but my overall plan is as follows...

3 seperate water loops, 1cpu, 1gpu, 1gpu, all with there own 120x3 rad. as of now everything in my rig now will be put into this case, its in my system specs.

asrock p55 extreme
corsair 750 tx
i7 860
2x280 gtx in sli
2x32gb patriot ssd's
2x500gb baracuda for storage
1 dvd writer


this is some of the goodies i have been collecting



and here's the case together, for now im going to leave the panels off untill i finish mocking up/cutting the case. some day if i feel inclined i might even have it powder coated or painted.











thanks for looking, any input is greatly apreciated.


D

ty, yea i plan on upgrading to a bigger modular psu, as i have 6 san aces and 3 ultra kazes. things gonna sound like a helocopter.

I forgot to tell you what all the goodies were in the pic.

white 1/2 id 3/4 od tubing
red anti kink coils
red reusable hose clamps
various barbs, and molex ends, molex crimper
sleeving kit, red
2 x bitspower resevoir tops for MCP355
2 x danger den tieton full cover 280 gtx waterblocks
1 corsair water pump, will most likely be replacing this with a MCP355 and bitspower resevoir top

right now im still thinking of a way to mount these radiators for easy acces to take fans off occasionally to clean them, thinking of mounting rad to case then fans on the inside of the rad. when i get more time this weekend ill mock up a 360 rad with fans and see what i can come up with.

sleeved the power switch and reset switch. took a pic with one sleeved and the other not sleeved yet for comparison.

just wanted to see how black fan grills would look against the aluminum, looks better in person. i only tacked the rad on with a few screws.I think it looks ok for now, not too worried about the color of the case as that can be easily altered. and that it one of the 6 san ace fans i will be using to cool the gpu radiators, still have to mock them up on a rad and cut/splice and sleeve(but thats for another day).

on the backside of that still thinking of fans, i realize this thing is gonna be loud with 24/7 100% fan. so my next thought was i need a fan controller on wich would handle 9 fans, 6 being san aces and 3 being ultra kaze 3000rpm.
was looking around and liked the looks of this one, but i'v never used a fan controller before so i didnt know if it was any good?



on a side note,every panel i have has black finger/hand smudges all over them, i could see visable hand prints thru the saran wrap packaging. i guess i expected a lil better quality control.

well i had some free time today and i unboxed my bitspower res tops, and a danger den water block. I also had some old 1/2 id tubing lyin around and a motherboard with a northbridge waterblock, that i used to mock up 2 of the 3 loops.

here is some of my new goodies all shiny and new.



and here is the mocked up loops, i didnt have 2 radiators laying around so i just ran the tubing to about where the front rad will be.




after playing with diff tubing routes and such, this seemed to be the best. So as of now i'll be putting the cpu loop on the front rad and the gpu on the top, and the other gpu still needs to have a rad placed.

as far as rad placement for the third loop i figured i would mount it to the right of the motherboard tray, as there seems to be ample room. so i spose my next project will be to figure out how to mount the rad. i will most likely make something out of aluminum or some other metal to fabricate a mounting bracket.

thanks for the idea's keep'm coming i have a dremel, drill, jigsaw, and such. im not scared to mod it, i was kicking around the idea of mounting it standing up to the right of the mobo tray flush against the back and cutting the side panel to accomodate a shroud fastened on the outside of the panel to hide the cut. something like this, still entertaining idea's at the moment.

very nice, thats exactly what came to mind when mockin up my loops trying to figure a nice placement. thanks for the great input man, also nice work looks great!

Things have been real slow at work not working full weeks, infact didnt work at all last week. so money's been tight looks like i wont be getting the 3rd pump and res top for a lil while.

was bored today so i decided to go ahead and splice n sleeve a set of fans for 1 of my rads.

fans, that need sleeving.




here it is all cut up and ready for sleeving and solder.





heres one set of wires soldered and shrink wrapped.






and here it is done, overall the soldering and sleeving went well, i only had problems/disgust with the black marks on the heat shrink that the lighter left. I think before i go any further with my sleeving, i will invest in a heatgun, for a more professionall clean look.

now i gotta try n get the black marks off of the shrinkwrap, as i reall dont feel like doing that all over again, just to fix some wrap.

I havent posted in here in a while but in my away time i was collecting some goodies, I'd say i have about 95% of the stuff i need to get this thing put together. the one thing thats holding me back right now is I havent gotten a heat gun yet to sleeve everything. now onto the good stuff.


my new goodies:Lamptron 4 channel fan controller, mcp 355 pump, bitspower acrylic res top for mcp355, 2 white 120mm case fans.





putting together 2 mcp 355's and bitspower res tops.


there's one now onto the next.




and there's 2 together.


I had to hold off on sleeving these right away I want to try with a heat gun, I got black marks from a lighter and I didn't really care for that.


still working on getting the 3rd rad mounted inside, I'm going to try to run 2 aluminum straps from the top to bottom with holes drilled into it for a mounting bracket. I've got the aluminum, so i held it up to the front panel to scribe screw holes for a nice fit, and well I failed at first!



lmao, here's my first attempt FAIL... look how f'ing crooked it is.






Then i did what anyone who was thinking would have done in the first place, I made a center line to go off of with a diff color sharpie.







Now I'm not sure if I'm going to cut the half round part out, it's only about a half of an inch or so, I don't think it will interfere that much with airflow. plus i dont want to weaken the strap to much, it is going to holding a 360 rad full of water and 3 big fat 38mm fans on it. Hopefully i'll get a heatgun soon and start heatshrinking all the wires and such and get this damn thing built.

i got a fair bit planned to sleeve. still have to solder/sleeve up 2 set's of 3 fans for my radiators. i might thru some diff color shrink on the psu its allready sleeved, I'm planning on upgrading that sometime. I also have 3 mcp 355's to sleeve along with some sata cables, and what ever else i get to.

drilled and ready for mock up mounting, will try to get to that this weekend. thinking of painting these and the mobo tray red, but its still far to cold to paint, i live in an apt. so outside painting is a bit away, im afraid.

ok here we go mocking up the rad mounting brackets....

first i filed the burr's off the straps.




I then clamped them together, and marked a final length for proper fit.






Time to cut, got myself a set of dremel ez lock cutoff disks, i real like the ez lock arbor and the ease of changing diff accessories.





And finally here it is in the case, i just love thos lil green clamps, got them at home depot for like 37 cents a piece, i think im gonna buy some more of those, there real handy.

if u notice i didnt have all the screws in, some of the holes didnt line up to well, i think im going to make another set, this time i will measure all the center point's instead of just scribing off of the front panel.