-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
[SOLVED] New CPU Installed issue on Asus Motherboards
- Thread starter nickg
- Start date
- Status
- Joined
- Mar 26, 2010
- Messages
- 9,921 (1.81/day)
- Location
- Jakarta, Indonesia
| System Name | micropage7 |
|---|---|
| Processor | Intel Xeon X3470 |
| Motherboard | Gigabyte Technology Co. Ltd. P55A-UD3R (Socket 1156) |
| Cooling | Enermax ETS-T40F |
| Memory | Samsung 8.00GB Dual-Channel DDR3 |
| Video Card(s) | NVIDIA Quadro FX 1800 |
| Storage | V-GEN03AS18EU120GB, Seagate 2 x 1TB and Seagate 4TB |
| Display(s) | Samsung 21 inch LCD Wide Screen |
| Case | Icute Super 18 |
| Audio Device(s) | Auzentech X-Fi Forte |
| Power Supply | Silverstone 600 Watt |
| Mouse | Logitech G502 |
| Keyboard | Sades Excalibur + Taihao keycaps |
| Software | Win 7 64-bit |
| Benchmark Scores | Classified |
anyway
what that you solved?
what that you solved?
is a mistake that affects many owners of Asus motherboards that use enhanced heat sinks to cool the CPU overclocked: the message "New CPU Installed!" at every cold boot, with the temporary loss of overclocking settings, and the request to access the bios to save the settings.
The problem occurs even when using the PC and especially the recovery from hibernation, preventing the revival of the PC.
de.das.dude
Pro Indian Modder
- Joined
- Jun 13, 2010
- Messages
- 9,206 (1.70/day)
- Location
- Internet is borked, please help.
| System Name | Monke | Work Thinkpad | Old Monke |
|---|---|
| Processor | Ryzen 5600X | Ryzen 5500U | FX8320 |
| Motherboard | ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4 |
| Cooling | 240mm Rad | Not needed | hyper 212 EVO |
| Memory | 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600 |
| Video Card(s) | Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB |
| Storage | Samsung 980 nvme (Primary) | some samsung SSD |
| Display(s) | Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L |
| Case | Ant Esports Tempered case | Thinkpad | NZXT Guardian 921RB |
| Audio Device(s) | Logitech Z333 | Jabra corpo stuff | Some USB speakers |
| Power Supply | Corsair RM750e | not needed | Corsair GS 600 |
| Mouse | Logitech G400 | nipple | Dell |
| Keyboard | Logitech G213 | stock kb is awesome | Logitech K230 |
| VR HMD | ;_; |
| Software | Windows 10 Professional x3 |
| Benchmark Scores | There are no marks on my bench |
can i put the socket back in after i pull the lever out??
Of Course! but you have to be careful during disassembly. In the pull out of its socket, you must be careful not to break guides (thin plastic) that govern. You might also find that a small piece of plastic (as happened to me) will come off by guides. It is important to be sensitive in the socket, trying to loosen its grip on the sides with a brooch or a very small screwdriver (such as those by watchmaker).
Personally I have done 2 times (when I removed the old and the new socket motherboard from Gigabyte) without problems.
In the page that I have indicated in the first place are schematic images to do operations and explanations. Considering that I use BING and GOOGLE to translate, so the indications may not be very clear. If you know the Italian language, read this page in Italian. Bye.
If you're not a newbie, try the second method (be careful!).
Personally I have done 2 times (when I removed the old and the new socket motherboard from Gigabyte) without problems.
In the page that I have indicated in the first place are schematic images to do operations and explanations. Considering that I use BING and GOOGLE to translate, so the indications may not be very clear. If you know the Italian language, read this page in Italian. Bye.
If you're not a newbie, try the second method (be careful!).
- Status