- Joined
- Jun 3, 2008
- Messages
- 422 (0.07/day)
- Location
- Pacific Coast
| System Name | Z77 Rev. 1 |
|---|---|
| Processor | Intel Core i7 3770K |
| Motherboard | ASRock Z77 Extreme4 |
| Cooling | Water Cooling |
| Memory | 2x G.Skill F3-2400C10D-16GTX |
| Video Card(s) | EVGA GTX 1080 |
| Storage | Samsung 850 Pro |
| Display(s) | Samsung 28" UE590 UHD |
| Case | Silverstone TJ07 |
| Audio Device(s) | Onboard |
| Power Supply | Seasonic PRIME 600W Titanium |
| Mouse | EVGA TORQ X10 |
| Keyboard | Leopold Tenkeyless |
| Software | Windows 10 Pro 64-bit |
| Benchmark Scores | 3DMark Time Spy: 7695 |
As the title states, I am trying to use ATItool 0.26. My first issue with it is an apparent incompatibility with Vista. It states that some driver was not able to be installed.
Whatever, I can't do anything about the above issue, so I ignore it.
Well, then when I open ATItool, it looks fine. The only thing is that the profile "default" states "(0.00 / 0.00)". This means that it is obviously not detecting my video card properly. Then, if I click on "Scan for Artifacts" or "Show 3d View", I get the error message:
"The video card you selected for overclocking in ATItool does not seem to be used by Windows.
Visual testing has been disabled.
To fix this, go to Display Properties, Settings and enable the monitor output of the card."
Well, this is with an ASUS EN9800GT Ultimate card. I can attest that the card is being used by Windows because I am looking at this screen right now as I type. The system has no onboard graphics card and only has one monitor hooked up to the one card (not an SLI or multi-monitor system).
It seems to me that W1zzard only needs to add support for my graphics card.
The video card information:
Device: NVIDIA PCI-E 9800GT
Vendor: ASUS
Product: G92 Board - 03930000
Device ID: 0614
Sub Vendor ID: 1043
Sub System ID: 829D
Board ID: 9C23
It is kind of an odd board because it has a 128 stream processor core on a 9800GT card. Really it is a rebadged 8800GTS.
Can I get this video card supported?
Whatever, I can't do anything about the above issue, so I ignore it.
Well, then when I open ATItool, it looks fine. The only thing is that the profile "default" states "(0.00 / 0.00)". This means that it is obviously not detecting my video card properly. Then, if I click on "Scan for Artifacts" or "Show 3d View", I get the error message:
"The video card you selected for overclocking in ATItool does not seem to be used by Windows.
Visual testing has been disabled.
To fix this, go to Display Properties, Settings and enable the monitor output of the card."
Well, this is with an ASUS EN9800GT Ultimate card. I can attest that the card is being used by Windows because I am looking at this screen right now as I type. The system has no onboard graphics card and only has one monitor hooked up to the one card (not an SLI or multi-monitor system).
It seems to me that W1zzard only needs to add support for my graphics card.
The video card information:
Device: NVIDIA PCI-E 9800GT
Vendor: ASUS
Product: G92 Board - 03930000
Device ID: 0614
Sub Vendor ID: 1043
Sub System ID: 829D
Board ID: 9C23
It is kind of an odd board because it has a 128 stream processor core on a 9800GT card. Really it is a rebadged 8800GTS.
Can I get this video card supported?
I'm looking forward to it.