- Joined
- Nov 7, 2017
- Messages
- 1,494 (0.63/day)
- Location
- Ibiza, Spain.
System Name | Main |
---|---|
Processor | R7 5950x |
Motherboard | MSI x570S Unify-X Max |
Cooling | D5 clone, 280 rad, two F14 + three F12S bottom/intake, two P14S + F14S (Rad) + two F14 (top) |
Memory | 2x8 GB Corsair Vengeance bdie 3600@CL16 1.35v |
Video Card(s) | GB 2080S WaterForce WB |
Storage | six M.2 pcie gen 4 |
Display(s) | Sony 50X90J |
Case | Tt Level 20 HT |
Audio Device(s) | Asus Xonar AE, modded Sennheiser HD 558, Klipsch 2.1 THX |
Power Supply | Corsair RMx 750w |
Mouse | Logitech G903 |
Keyboard | GSKILL Ripjaws |
VR HMD | NA |
Software | win 10 pro x64 |
Benchmark Scores | TimeSpy score Fire Strike Ultra SuperPosition CB20 |
While its a common pump, rpm range doesnt match the genuine ones, and i cant find a comparable setup
(5950 XSPC block "clone"+ 2080S full block, using copper rad from eisbaer 280 AIO (non LT version), 1/2in ID tubing)
to get any idea of upper rpm i should limit it to.
so far i have set it to start a little above min rpm needed so it starts (1900rpm/45% pwm), and limited to 80% of max rpm (~3600 rpm) for end of pwm range (MB, 100C).
in short: since i dont really see much of a restriction to flow, what max rpm should i limited the pump to, reaching say 90C on cpu.
(5950 XSPC block "clone"+ 2080S full block, using copper rad from eisbaer 280 AIO (non LT version), 1/2in ID tubing)
to get any idea of upper rpm i should limit it to.
so far i have set it to start a little above min rpm needed so it starts (1900rpm/45% pwm), and limited to 80% of max rpm (~3600 rpm) for end of pwm range (MB, 100C).
in short: since i dont really see much of a restriction to flow, what max rpm should i limited the pump to, reaching say 90C on cpu.