Exposed earlier this month, Thermalright's Silver Arrow SB-E high-end CPU cooler has now become available in Europe, priced at 64.99 Euro (cheaper than it was suggested by the pre-order prices).

The Silver Arrow SB-E measures 130 x 170 x 170 mm, it weights 1124 grams, and features eight nickel-plated 6 mm copper heatpipes, two Double Ball Bearing fans - one 140 mm TY141 (900 - 1300 RPM) and one 150 mm TY150 (500 - 1100 RPM), and a universal mounting system providing support for Intel LGA 2011 / 1366 / 1156 / 1155 / 775 and AMD AM2(+) / AM3(+) / FM1 processors.

Thermalright's cooler can be found on sale here.

The TMEIII is the next evolution of the hugely successful TherMax Eclipse CPU cooler series. The increased number of heat-pipes combined with a higher number and density of dimpled fins and crowned with two (2) high airflow, Nano Bearing DC fans for extreme cooling performance. Five (5) U-shaped 8 mm all-copper heat-pipes are in direct contact with the CPU heat-spreader (heat source), rapid heat transfer to the 45 aluminum dimpled fins providing a larger surface area for optimum heat dissipation.

The TME III is supplied with two (2) 12 cm BlackStar 7 blades, high quality precision Nano - Bearing DC fans, providing high airflow and sufficient cooling. These fans are PWM controlled to provide the best sound / cooling ratio possible. Compatibility is guaranteed with multi-platform mounting for all current Intel and AMD micro-processors. The TME III brings cooling power to an all-new level. Another amazing product from Spire - Powered by Innovation.

Noctua today presented its new NH-L12 low-profile cooler for Small Form Factor cases and HTPC environments. The NH-L12 features a flexible NF-F12 (120 mm) / NF-B9 (92 mm) dual PWM fan setup that can be configured either for full performance in dual fan mode or extra-low profile (66 mm) with the top fan removed.

"The industry trend towards Small Form Factor and Home Theatre PCs is well-established, but there's still a lack of suitable high-quality quiet CPU coolers", explains Mag. Roland Mossig, Noctua CEO. "Building a powerful PC always requires a capable CPU, which in return demands a competent cooling solution. But who wants his HTPC to sound like a jet engine? This is precisely where the NH-L12 steps in."

Phanteks introduces PWM external adaptor for its award winning PH-TC14PE Premier CPU cooler for free! In order to optimize our products with thermal possibilities and capabilities, Phanteks includes a PWM external adaptor for its PH-TC14PE CPU Cooler. The PWM external adaptor will convert the PH-F140 fan into a PWM controlled fan. Now you can achieve silent or maximum performance automatically and give you a piece of mind.

The new PWM external adaptor can be requested free of charge here, for all current Phanteks owners. Only a proof of purchase is required. All new shipment of PH-TC14PE series will be included with PWM adapter.

Cooler Master, an industry leading chassis, thermal solution, peripheral, and accessory manufacturer today announces an expansion to its top-selling NotePal X Series of laptop coolers, the NotePal X3.

It brings the high cooling potential and futuristic aesthetic of the X-themed form factor that is implemented in every NotePal X Series laptop cooler. NotePal X3 is well-equipped to cool laptops up to gaming and workstation desktop replacements and other high processing power systems.

To finish off the week in style Thermalright announced the Silver Arrow SB-E, a new, high-end CPU cooler based on the Silver Arrow model introduced back in 2010.

The Silver Arrow SB-E features a dual tower/dual fan design and has eight (nickel-plated) 6 mm copper heatpipes (the old Arrow comes with four 8 mm pipes), a tweaked heatsink, two TY PWM fans - one 140 mm and one 150 mm (the SA packs two 140 mm spinners), and a mounting kit offering support for Intel LGA 2011 / 1366 / 1156 / 1155 / 775 and AMD AM2(+) / AM3(+) / FM1 processors.

The Silver Arrow SB-E also makes use of some more 'discrete' fan clips that won't interfere with taller memory modules. The cooler is expected to become available at the end of this month. No price tag was announced but we found it on pre-order at about $103 / 78 Euro.

Cooler Master has just announced the European arrival of the GeminII SF524 CPU cooler. This model features the same specs as the GeminII S524 released in August except it comes equipped with a different fan, one that operates at 1300 RPM or 900 RPM when using the silent mode adapter (the S524 has a PWM fan going at 800 to 1800 RPM).

The GeminII SF524 measures 144 x 144 x 105 mm, it weights 592 grams, has five 6 mm copper heatpipes, and offers support for Intel LGA 1366 / 1156 / 1155 / 775 and AMD FM1 / AM3+ / AM3 / AM2+ / AM2 processors. The cooler can be found selling for 37 Euro.

Among the sea of tower-type CPU coolers which are the same old tripe packaged and colored differently, few companies are actually investing in innovation, one of them is Prolimatech. The company is working on two new yet-unnamed CPU coolers specifically designed for socket LGA2011 motherboards, one has already taken shape, the other is still in its CGI form.

The first one (first two images below), appears to be an leaner, fitter evolution of the Prolimatech Genesis. While the Genesis uses a dual-independent fin-stack design in which one stack propagates perpendicular to the plane of the motherboard while the other propagates parallel to the plane, on this new design, both stacks propagate parallel to the plane, in opposite directions, and both being dissimilar in size.

Titan Technology unveiled its latest Siberia CPU Cooler, the TTC-NC55TZ(RB). The cooler has an asymmetric aluminum fin tower design, which cools other hot components on the motherboard along with the CPU. The design consists of a nickel-plated copper base, from which five copper heat pipes pass. One end of these heat pipes pass through an aluminum fin stack that propagates along the plane of the motherboard, while the other passes though a stack that propagates perpendicular to this plane.

The stack that's along the plane of the motherboard is the larger of the two, and is ventilated by a 140 mm fan. The perpendicular stack is ventilated by a smaller 120 mm fan. The 140 mm fan spins at 700 ~ 1,800 RPM, pushing 34.78 ~ 89.43 CFM of air, with a noise output of 8.3 ~ 28.8 dBA. The 120 mm fan, on the other hand, spins at 800 ~ 2,200 RPM; pushing 24.23 ~ 66.2 CFM, with 15.0 ~ 35.0 dBA noise output. Both fans have 4-pin plugs and support PWM control. The heatsink itself measures 200 x 130 x 162 mm (WxDxH), weighing 755 g. All current sockets, including LGA2011, LGA1366, LGA1155/LGA1156, AM3+/AM3/AM2+/AM2, and FM1 are supported. It is priced at 6,980 JPY (US $91.6).

Because of the lignin it contains, bamboo is one of the most stable raw materials available. It offers outstanding strength and durability. And because it is one of the fastest growing plants in the world, bamboo is an ideal raw material. This is why Zignum decided to make its new laptop coolers Bamboo One (article number COO-ZGLP-E1-15.BM) and Bamboo Two (COO-ZGLP-E2-15.BM) out of bamboo.

These unique laptop coolers not only have a bamboo look, but are made almost entirely of renewable bamboo, including the fan. Integrated, fold-out supports allow users to adjust the height and angle to their individual requirements. Below the bamboo surface there are one or two 140 mm fans to ensure efficient, low-noise cooling. Both coolers are suitable for laptops of up to 39.6 cm (15.6").

Cooler Master, an industry leading enclosure, thermal solution, peripheral, and accessory manufacturer, showcases a tribute to their effort to continually innovate. The X6 CPU Cooler has arrived and is a daring new take on high performance cooling and design.

Bold Design and Innovative Features

Designed for overclockers and gamers, X6 is adorned in a satin black finish with crimson red fan blades and accents. The heatsink employs a unique honeycomb fin structure to maximize surface area for cooling. This is used in conjunction with an angled base that acts as a means to increase overall airflow throughout the chassis. Clever air duct deployment on the outer shell directs airflow to pass over critical cooling areas. X6 also comes equipped with a high performance PWM controlled fan that can be adjusted via BIOS or OS-based motherboard tuning applications.

After showing to the world its Radeon HD 7970 PCB with all components placed, Yeston disclosed pictures of exactly what it's going to use to cool the beast. Yeston's cooling solution uses two big (probably 120 mm) fans inspired by the design of aircraft turbofans, with 18 blades on its impeller. Such impellers with PC cooling fans aren't new, and have been used in case fans designed by the likes of Cooler Master. However, this could be the first time such fans have been used in a VGA cooler.

Underneath the frame holding the two fans is a large aluminum fin stack-type heatsink that spans almost the entire area of the PCB. A copper base makes contact with the GPU, from it, six copper heat pipes originate, conveying heat to two aluminum fin stacks, which are then ventilated by the two fans. When fully assembled, the cooler is so large that it appears to span across almost four expansion slots. Yeston is reportedly still working on improving the design. Let's hope it gets a lot slimmer than that.

Like with the Frio Snow Edition, Thermaltake's higher-end CPU air cooler, the Frio OCK, also has a Snow Edition variant. As a variant, its specifications are otherwise identical to the original, except that the black+red colored plastic parts (such as shrouds, fan frames, and impellers), are replaced with white+blue colored ones. The blue, of course, is an "icy" shade of it. The top shroud is black, to offer a nice contrast with the white+blue colored fan frame. Measuring 143 x 136.8 x 158.4 mm (LxWxH), the cooler weighs about 1.1 kg. It uses a slightly larger heatsink than the one found on the Frio, to which heat is conveyed by six 6 mm-thick heat pipes. The heatsink is ventilated by two 130 mm fans in "push-pull" configuration. The new variant also provides out-of-the-box support for LGA2011 socket.

Responding to the market's new-found love for white colored components, Thermaltake announced a few "Snow Edition" products, including the Frio Snow Edition, pictured below. This cooler uses the same exact design as the original version, but replaces the black+red plastic parts of it with white+blue, including a white colored fan impeller. It is a typical aluminum fin tower-type heatsink with two pre-fitted 120 mm fans in push-pull configuration. It measures 139 x 98 x 165 mm (LxWxH), weighing a little over 1 kg. Another feature of this cooler is out-of-the-box support for socket LGA2011.

Arctic showed of two nearly-identical CPU coolers, the Freezer i30 and Freezer A30. The two are identical till the point where the i30 is designed for Intel sockets only (LGA2011, LGA1155/1156), while the A30, for AMD sockets only (AM3+/AM3/AM2+/AM2). The two share a tower-type aluminum fin-stack heatsink design, capable of handling thermal loads of up to 320W.

The heatsink uses four 8 mm thick exposed-copper heat pipes that make direct contact with the CPU at the base, and pass through the heatsink, which is then ventilated by a 120 mm PWM-controlled fan with a fancy-looking frame. Rubber standoffs attach the fan to the heatsink dampening vibrations. The retention clips come attached to the heatsink out of the box. A 0.5g syringe of Arctic MX-4 compound is included, while the coolers' base don't come with the compound pre-applied.

Japanese cooling expert Scythe has today announced a new Screw Kit for upgrades to socket LGA2011. Thanks to this new Scythe Screw Kit for Intel LGA 2011 users are able to upgrade new as well as older Scythe CPU Coolers to achieve compatibility to the recently announced enthusiast platform based on socket LGA2011. It is possible to use the new Screw Kit with the CPU Coolers Mugen 3, Mine 2, Ninja 3, Susanoo, Mugen 2 Rev.B and Big Shuriken 2 to upgrade and establish compatibility. Required screws, wrench and manual are contained in the package of the Screw Kit.

Mentioned CPU Coolers are usually mounted with a Scythe backplate designed for various sockets. Socket LGA2011 mainboards are already equipped with an own pre-mounted backplate which is firmly connected to the socket. Scythe Screw Kit for Intel LGA 2011 is utilizing this backplate and achieves a solid as well safe mounting between socket LGA2011 and the Scythe CPU Cooler. Installation still requires the Metal Assembly Clips for socket LGA775, 1155, 1156, 1366 which are delivered with the mentioned CPU Coolers.

As revealed on its website, Arctic will next month be releasing a new, cost-conscious cooling solution, a CPU cooler called Alpine 64 PLUS which specifically supports AMD Socket 939, AM2(+), AM3(+) and FM1 processors.

The upcoming cooler measures 115 (L) x 98 (W) x 70 (H) mm, it weights 430 grams, and features an aluminum heatsink and a 92 mm FDB (Fluid Dynamic Bearing) fan operating at 600 to 2000 RPM. The Alpine 64 PLUS comes with pre-applied MX-4 thermal compound, is backed by a six-year warranty, and is set to become available on February 20th, priced at $14.95 / €11.27.

Japanese company Scythe has just announced the European release of a revised version of the BIG Shuriken 2 low-profile CPU cooler, one that adds support for LGA 2011 (aka Sandy Bridge E) processors while maintaining compatibility with Intel LGA 1155, LGA 1156, LGA 775, LGA 1366 and AMD Socket AM2, AM2+, AM3, AM3+ and FM1 chips.

Scythe's updated cooler measures 125 x 135 x 58 mm and features a nickel-plated copper base, five copper heatpipes (Oval Heatpipe Structure), and a Slip Stream 120 Slim fan boasting a Sleeve Bearing that can operate at 500 to 2.000 RPM (9.32 - 33.67 dBA sound output).

The BIG Shuriken 2 Rev. B has a recommended price tag of 30 Euro (VAT not included).

Seven months after its Computex unveiling, Thermaltake's Frio Extreme CPU cooler has now finally been introduced and is preparing to make its retail debut later this month. The Frio Extreme has a maximum cooling capacity of 250W and supports Intel LGA 775, 1155, 1156, 1366, 2011 and AMD Socket AM2(+), AM3(+) and FM1 processors.

Thermaltake's cooler measures 148.2 (L) x 151 (W) x 160 (H) mm and features a dual-tower design, 0.4 mm aluminum fins, a mirror-finish copper base, six 6 mm-U-shape copper heatpipes, and two 140 mm PWM fans operating at 1200 to 1800 RPM (their maximum sound output is 39 dBA).

The Frio Extreme comes bundled with thermal grease and a VR and PWM function fan controller. No word on pricing though.

Announced earlier this month, Zalman's CNPS10X Optima CPU cooler has started to pop up in store listings as a pre-order item. Set for a January arrival, this new tower cooler makes use of Direct Touch Heatpipe (DTH) technology and comes with support for Intel LGA 1155 / 1156 / 1366 / 775 and AMD AMD Socket FM1 / AM3+ / AM3 / AM2+ / AM2 processors.

Zalman's creation measures 132 (L) x 85 (W) x 152 (H) mm, it weights 630 grams, and has four copper heatpipes, aluminum fins, and one 120 mm FSB (Fluid Shield Bearing) fan which features Shark Fin blades (for increased airflow and lower noise & vibration) and operates at 1,000 to 1,700 RPM (sound output is 17 to 28 dBA).

The CNPS10X Optima is bundled with a pinch of ZM-STG2M thermal grease and can be found priced as low as 22.76 Euro.

German PC cooling and power manufacturer Be Quiet announced a free compatibility upgrade for all its customers. The upgrade gives users support for Intel's latest LGA2011 socket platform, and is particularly well timed, since some of the company's best CPU coolers were released only recently, such as its famed Dark Rock series, which are more than capable of handling 130W TDP processors, which LGA2011 Core i7 processors, are. The LGA2011 mounting kit can be availed for free (including shipping charges), by filling up a request form, and supplying Be Quiet with product serial numbers, or any proof of ownership of an LGA2011 motherboard. The request form can be filled here.

Japanese cooling expert Scythe has today announced the revision of the popular CPU Coolers Scythe Mugen 3, Mugen 3 PCGH and Ninja 3. Scythe has upgraded the CPU Coolers to Rev. B. Users can easily differentiate the new version from the old ones by the added suffix "Rev. B" in the names: Mugen 3 Rev.B, Mugen 3 Rev.B PCGH and Ninja 3 Rev.B. New Revision B brings support to the recently announced Socket LGA2011 and therefore compatibility to Sandy Bridge-E CPUs.

Cooling specialist Prolimatech is expanding their diverse line-up of coolers further after the successful Panther launch. Their latest CPU cooler by the name Lynx aims to take the entry level by storm, offering excellent compatibility and bundling a 120 mm PWM equipped fan right out of the box.

The manufacturer Prolimatech is known for high performance and silent cooling solutions like the Megahalems, Armageddon and Genesis. Their newest unit is incredibly compact and intended to appease the budget user. Called Prolimatech Lynx, it delivers the most cooling possible combined with a size that ensures maximum compatibility.

EVGA made its SuperClock CPU fan-heatsink ready for Intel's new "Sandy Bridge-E" socket LGA2011 platform with a mounting kit update that can be purchased separately, as well as could be included in future batches of the product. Carrying the part number M020-00-000234, the LGA2011 mounting kit update for EVGA SuperClock, is priced at US $9.99 on the EVGA store. EVGA released the SuperClock CPU fan-heatsink this May, it is a tower-type fan-heatsink with design based on Swiftech Polaris 120. EVGA's implementation makes use of black fins, heat pipes, and a red LED-illuminated fan. Excluding the LGA2011 mounting kit, the EVGA SuperClock is priced at $55.

Thermaltake, being the industry pioneer brand in thermal solutions with the mission of "delivering the perfect user experience," carrying the corporate vision of "building Thermaltake Technology into a cultural brand for the enjoyment of entertainment, e-Sports, technology, and lifestyle," featured the Contac CPU air cooling Series that aids in fulfilling various needs in the market as well as the corporate mission of "delivering the perfect user experience." This fall adding the shimmering Thermaltake Contac 39 and Contac 30 CPU air cooling to the series, providing a wider range of solution for bargain hunter who desire value and performance equally.