EK, the premium water-cooling gear manufacturer, is launching a new distro plate for the Lian Li O11D XL chassis. The distro has a built-in EK-Quantum Lumen screen, a 7" IPS monitor that can be seen from the front of the case. It is designed to provide advanced water cooling with the latest 3rd-generation SATA-powered D5 pump, removing the need for additional 4-pin Molex cables. The Reflection² series distribution plates are EK-Matrix7 compliant.

The EK-Quantum Reflection² PC-O11D XL D5 PWM D-RGB - Screen Edition is a custom water-cooling reservoir, routing, and pump solution that seamlessly fits into the front of the case showing off a beautiful 7" IPS screen with an aluminum frame. This waterway is also equipped with six innovative push-in ports that come with female G1/4" threaded adapters. The idea is that users can easily assemble the whole radiator + fittings + tubing combo and use these push-in adapters to simply slide it into the distribution plate. The bottom radiator is mounted via a special metal bracket.

Thermaltake, the leading PC DIY premium brand for Case, Cooling, Gaming peripherals and enthusiast memory solutions, is thrilled to launch the View 300 MX and View 300 MX Snow Mid-Tower Chassis, two sleek-looking chassis models that will draw your attention the moment you see them. Featuring dual front panels, two pre-installed 200 mm and one 120 mm ARGB PWM fans for massive airflow, patented rotatable PCI-E slots, and more, the View 300 MX series sets out to suffice the most challenging cooling demands.

The View 300 MX series is specifically designed for gaming enthusiasts looking for the best PC-building solution. For starters, View 300 MX series has a 4 mm thick tempered glass side panel exhibiting all your components in their perky RGB lighting. It also features a tempered glass front panel with a mesh edge and can be replaced by the perforated TT logo steel panel that comes in the box depending on your personal preference. Its dual front panel design allows users to choose and display the PC build to their preference. What's more, two of the pre-installed 200 mm ARGB PWM fans and one 120 mm ARGB PWM fan make it possible to move a considerable amount of air through the chassis with reduced noise due to the fan speed control through the PWM function. On top of that, the LED effects can be easily tweaked with a click of the physical button or through motherboard software such as ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. For those who like to orient your GPU vertically, now with the patented rotatable PCI-e slots, you can place it both horizontally and vertically without any difficulties.

Thermaltake, the leading PC DIY premium brand for Case, Cooling, Gaming peripherals and enthusiast memory solutions, is excited to reveal the Divider 550 TG Ultra, the first Thermaltake chassis with an LCD screen to let users monitor PC real-time information and display customized GIF or images, at the 2022 Thermaltake EXPO January Virtual Exhibition.

Being the first case with an LCD screen in the Thermaltake collection, the Divider 550 TG Ultra is an ATX mid-tower chassis with a 3.9" LCD screen on the top of the front panel, offering a new way to monitor your PC's performance at the same time to show your own personality. Focusing on both function and appearance, the Divider 550 TG Ultra provides a crystal-clear view through a tempered glass side panel on the left side which allows users to fully display and admire all the components of their build; on the right side, it keeps the unique features of the Divider series incorporating a special symmetrical triangular side panel design, and provides better thermal extraction through the small holes on the side panel.

Thermaltake, the leading PC DIY premium brand for Case, Cooling, Gaming peripherals and enthusiast memory solutions, unveils a brand new mid-tower case, the Divider 500 in black and snow, and with two editions: the sensational TG ARGB with motherboard sync and the new variant TG Air which stands for airflow.

With its inimitable body design and special symmetrical triangular panels, the Divider 500 is an ATX mid-tower chassis that is designed with supreme hardware backing, support for DIY liquid cooling solutions, and offers high quality four 3 mm thick tempered glass window panels at the front, top, left, and right for the Divider 500 TG ARGB (and two 3 mm thick tempered glass window panels at the left, and right for the Divider 500 TG Air). The crystal-clear window design with two TG panels permits users to fully display and admire all the components of their build.

Bitspower has announced a new addition to their VGA waterblock lineup in the form of the Mobius, a specialty-designed waterblock that's meant to fit only NVIDIA's GeForce RTX 3080 Founder's Edition. The Mobius has been engineered to mimic the original NVIDIA design, but trades the traditional dual-fan configuration for a higher-performance cooling solution that stays true to NVIDIA's original design vision for the Founder's Edition.

The waterblock features a nickel and chromium-plated copper base plate, engineered with direct contact technology to cool both the GPU chip and VRM circuitry. The Mobius features an acrylic cover which supports Bitspower's Digital RGB LED technology - which has sync capabilities with popular 3rd party RGB software (ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ, and Razer Chroma). The waterblock features a cutout for NVIDIA's reference 12-pin power connector, and an additional RGB sync cable that extrudes from the PCIe connector side of the waterblock. the Bitspower Mobius waterblock for NVIDIA's GeForce RTX 3080 FE is being listed at $325.

[Editor's note: Our review can be seen here]

Thermaltake, the leading PC DIY premium brand for Case, Cooling, Gaming peripherals, and enthusiast memory solutions, announces the launch of the new Divider Series Chassis line up. The Divider 500TG, 300TG, 200TG, 100TG models, including standard and ARGB versions, available in black and white colors. The Divider Series offers a range from M-ATX to ATX form factors, divided by 3mm tempered glass to provide a custom split difference for the next PC build. The Built-in triangular side panel includes side venting to improve airflow. Patented PCIE expansion slots offer secure options for vertical GPU mounting or direct to motherboard with a variety of GPU length support across the series.

"A good PC case design should be more than just fascinating RGB illumination and overall appearance. It needs a perfect balance between practicality, aesthetic, and thermal dissipation," said Kenny Lin, the CEO of Thermaltake. "More powerful CPUs and GPUs are launching every day, making heat dissipation a significant concern for a gaming PC. The DIVIDER offers essentials to create the perfect ratio between material utility and the control of thermal conditions. It is also the next-gen gaming PC case for enthusiasts, modders, and gamers in sheer quality, and we're proud to present this whole new series at our Thermaltake Expo."

GIGABYTE today unveiled its flagship case, the AORUS C700 Glass. Featuring the same design-language as its latest generation of AORUS motherboards and graphics cards, the C700 Glass is a humongous ATX full-tower case measuring 714 mm x 301 mm x 671 mm (HxWxD). It supports E-ATX (or smaller) motherboard form-factors, with room for graphics cards up to 49 cm in length, CPU coolers up to 19.8 cm in height, and PSUs up to 20 cm in length. You also get a vertical graphics card mount. Its asymmetric body design features elements of brushed aluminium, steel, plastic, and tempered glass, with dozens of independent ARGB LED lighting zones that are controlled by an included ARGB controller you can plug into your motherboard to control using GIGABYTE RGB Fusion 2.0 software.

Ventilation options on the GIGABYTE AORUS C700 Glass include three 140 mm front intakes, three 140 mm top exhausts, and two 120 mm rear exhausts. You can mount a 240 mm x 120 mm radiator along the rear exhaust, and 420 mm x 140 mm radiators along the top- and front panels. Storage options include four 3.5-inch drive bays, and six 2.5-inch mounts at various locations. Front panel connectivity includes a USB 3.x type-C, four USB 3.x type-A, an HDMI (which connects to your graphics card), audio jacks, and dedicated controls to invoke RGB Fusion and fan control (this takes up a USB 2.0 header). The company didn't reveal pricing.

Bitspower has announced pre-order availability of its long-named "Bitspower CPU Block Summit ELX for AMD TRX40 Platform with OLED". The Summit ELX block is compatible with both AMD's TRX40 and X399 platforms, so you can deploy it on a last-gen Threadripper and look to upgrade in the future without having to replace your entire watercooling setup.

Bitspowers says the selling points are the OLED illumination and cooling capabilities of this waterblock, with its "clean look and high-density heat sink fin design". The "two-way tunnel design", according to Bitspower, saves you form the hassle of having to route waterways in a specific direction - you are free to routa ientry and exit points of your heatsink as it better suits your PC-building options. The Summit ELX for AMD TRX40 with OLED features a narrow footprint to ensure it doesn't interfere with the RAM slots, as well as a metal top layer and a copper base plate. The lighting elements are compatible with ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, and Razer Chroma. The preorder is available for TWD 4,200, which amounts to some $140.