Power Consumption

Cooling modern video cards is becoming more and more difficult, especially when users are asking for quiet cooling solutions. That's why the engineers are now paying much more attention to power consumption of new video card designs.


In order to characterize a video card's power consumption, the whole system's mains power draw was measured. This means that these numbers include CPU, Memory, HDD, Video card and PSU inefficiency.

The three result values are as following:

• Idle: Windows sitting at the desktop (1024x768 32-bit) all windows closed, drivers installed.
• Average: 3DMark03 Nature at 1280x1024, 6xAA, 16xAF. This results in the highest power consumption. Average of all readings (two per second) while the test was rendering (no title screen).
• Peak: 3DMark03 Nature at 1280x1024, 6xAA, 16xAF. This results in the highest power consumption. Highest single reading.

In ATI's latest GPU you will further notice improvements to their PowerPlay power reduction features. A special microcontroller is integrated into the ASIC now which controls all aspects of power saving. Basically it gets fed a table with clocks, voltages, fan speeds and when to apply them. Just like previous generations the card switches performance levels depending on GPU load, the new features allow better control over it though.

It seems the clock levels are stored in the driver now, because I saw different levels with different drivers. The following are the levels included with Catalyst 8.6.


The load detection is not dependent on 3D fullscreen, but on actual GPU usage. Some earlier products had the problem that they would run in 2D mode only even when a windowed 3D application was active. This is not the case on the HD 3xxx and HD 4xxx Series.

Even though the idle power consumption is too high to beat the GTX 280, it is quite low. Under load the Radeon 4850 is one of the most power efficient cards considering the performance it offers.