TPU's F@H Team

[BUCK NASTY]

I apologize if you were referring to "Get & Set Affinty Changer", which is a great program for assigning cores and priorities. I am referring to "F@H Affinity Changer" which runs as a service and has no settings or core assignment. F@H A/C will override other affinity changers and should be used on SMP only machines due to the fact that is uses all cores to scavenge unused cycles. Sorry for the confusion.

 

[phanbuey]

buck... all i have to say is that i can hear FPL crying ... you are 25% of the entire TPU folding team atm.

 

[BUCK NASTY]

buck... all i have to say is that i can hear FPL crying ... you are 25% of the entire TPU folding team atm.

Ok, where are you located if you know of the nefarious "FPL"? We should get together for some "Lan Folding"...

On another note, sometimes when the planets are in the correct alignment we have the following phenomenon take place. Behold 16 instances of WU 50XX, all folding on Fahcore11 v1.15 I have to admit, I did dump a few 57xx WU's to get these. I wish it would last... Oh well, let me get back to my moment of Zen

 

[phanbuey]

Miami... and might i add its cold as &%&$ (for florida).

also GPU console clients... how to? just download 2 and put in diff directories? lemme try that (i have a dummy plug workaround already going)

 

[BUCK NASTY]

Miami... and might i add its cold as &%&$ (for florida).

also GPU console clients... how to? just download 2 and put in diff directories? lemme try that (i have a dummy plug workaround already going)

Ah, Miami. You either love it or hate it. I am in Port St. Lucie(near the Nuclear Power Plant )

PM me on the setting up the client.

 

[stanhemi]

Congrats @BUCK NASTY 4 millions pts

 

[Steevo]

That is somewhat crappy to dump projects to get more points.



I just started my quad the other day and the first units are done now. SMP + GPU folding.

 

[BUCK NASTY]

That is somewhat crappy to dump projects to get more points.

Thanks for jumping back in the fold. I can understand your feelings concerning my dumping of 3 work units. I rarely do this, except when deleting a client/work. I'm not gonna go into it, but I do want to say I reserve the right to do what I feel is right for my farm. Done!

 

[Steevo]

Added two more. A few more to go with the SMP, and I can add a couple on with SMP plus the GPU client.

 

[johnspack]

Sent 2 pms Buck, sorry hit the send button or something before I finished... Yeah, I'm getting tired of my 2nd card eueing on any 57xx job. At least if it's by itself, it'll fold. Congrats on 4 mil Buck! I keep reflushing jobs on my 2nd card, but it keeps sending new 57xx jobs at me, they won't stop! Some of the 57 jobs make my gtx280 run at 80c @ 100% fan....

 

[johnspack]

I'm hitting top 20 in 2 days, why have so many producers stopped? We need everybody folding as much as possible!!!!

 

[johnspack]

Darn, what's with all the 384 pointers, my 280 gets 8k ppd on them, but it's killing my points! Guess it'll take a day or 2 more to get top 20. On the plus side, I'm officially in the 200k+ point club! Yaaaay! (check my fah stats, more upto date). Still don't think I should of passed so many ppl so fast..... Fold On!

 

[stanhemi]

Need a nvidia card fast,I'm folding for 8 days now and get only 17K.Best deal i found at my local pc shop is a Evga 9600 GT 512 Megs for 155$(can)lol really too expensive before chrismas.I have to stop folding soon,my wife need my pc for her work so.......Hope i can found a nvidia card really soon.

 

[johnspack]

Have you been using the newest 6.23 client? That seems very very low for the card you have. Honestly, the 9600gt would beat that, but I still think somethings wrong. Don't those 4850s oc fairly well? Wish I knew more about ati cards. Isn't there a 8.12 driver out now? Just some ideas...

 

[stanhemi]

yep i'm using the new client 6.23.If i left the card stock it give me 2300 ppd,now my gpu clock are at 650mhz and im at 3200ppd but can't overclocked my memory it crash right away,even with 998mhz.

 

[johnspack]

Actually, leave your memory at stock, memory speed really doesn't help with this, shader speed is the most productive. If you leave your mem at stock, you might even be able to get a bit more out of your shader That ppd is starting to get close I think at oced speeds. Are you using 8.12? Sorry, realllly wish I knew more about atis.. still think you could get more.

 

[stanhemi]

ok i leave my memory at stock but try to push my gpu core around 675-680mhz.I download a mod driver 8.12, try it later tonight.

 

[trickson]

OK I am in ! I DL the program and will run it from here on out !

 

[johnspack]

Ok yes, again forgive my ignorance, forgot ati ties core to shader, can you set fan speed on that? I'd set a higher fan speed if you can, and watch gpu temps. Don't burn that baby out! Not likely of course due to shutdown parms, but whatever it's stable at max in atitools, back it down a few for folding. I slightly baby my cards on oces, because they run most of the day.

 

[johnspack]

Excellent, one gtx260 added, thanks trickson!
Sorry, didn't get a thanks button in this thread for you, or I'd give you a 2nd!
We Need GTX cards!!!!!!

 

[trickson]

Excellent, one gtx260 added, thanks trickson!

Not a problem at all . this computer runs all day long ! most of the time I am not even on it so it might as well do some thing good , Right !

 

[stanhemi]

here my temp after 170 hour of constant load.

 

[johnspack]

Wow, very nice, no temp issues there! Well, even at 3200ppd, it should do much better than 17k in 8 days now! And soon they will release a core that can properly use all shaders on that card, and you will get much better ppd.

 

[johnspack]

Doing good deathmore! Keep it up!

 

[BUCK NASTY]

Yea, all these big atom WU's are killing my little ol 8800GS's. Maybe I should switch my farm to GTX260's. Now how much would 18 of them cost???