Jakethesnake011
New Member
- Joined
- Mar 15, 2009
- Messages
- 353 (0.06/day)
- Location
- Western Mass
System Name | My i7 Build |
---|---|
Processor | Intel Core i7 920 @4.2 |
Motherboard | EVGA CLassified E760 |
Cooling | [Lapped & Washer Modded] Thermalright Ultra-120 w/ 2 Ultra KAze 3000 RPM Fans |
Memory | Kingston HyperX DDR3 2000Mhz 8-9-8-21 1T |
Video Card(s) | Sapphire 5870 Flashed with ASUS BIOS |
Storage | Patroit Torqx 128gb SSD & 2-Samsung 1Tb 72k |
Display(s) | ASUS VW266H 25.5" 1200p LCD |
Case | Thermaltake Armor+ Full AtX |
Audio Device(s) | EVGA onboard sound |
Power Supply | Thermaltake 1200W ToughPower |
Software | Windows 7 Ultimate Sig Edition |
Benchmark Scores | Vantage 19492 3dmark06 23450 Super Pi: 9.906s for 1M |
I have had problems with this Turbo mode and windows 7. But when the CPU is under load the voltage jumps down to about 1.39V Range and the temps are manageable. Now my QPI is about 1.36V and it seems to be working good there Sometimes I add 0.10V to it when running 3dMark or Linx.
Noticed you were not talking to me Paulie. Well anyways is 1.36V for QPI normal or should I jump it up to 1.40V?
Noticed you were not talking to me Paulie. Well anyways is 1.36V for QPI normal or should I jump it up to 1.40V?