WCG Daily Numbers

Velvet Wafer · Oct 4, 2009

Chicken Patty said:
I wasn't really going to do that

Anyhow, my A/C is not working soooooo, hmmm tempting

I want to cool you i7 *boooo*
now, does it haunt you?

p_o_s_pc · Oct 4, 2009

velvet what the hell is that?

Velvet Wafer · Oct 5, 2009

i now have found the correct name for it: its an Oktokatdeka-Rad (greek:18)
anyone has 30 spare fans for an engaged cruncher? i only have 6 so far

xVeinx · Oct 5, 2009

Great job guys. Glad to see you all crunching strong

.

HammerON · Oct 5, 2009

Will I finally had time last night (I thought) to switch my i7 rig to wc. I got it all together and then when I started to fill the system I noticed that both the inlet and outlet on the GTZ was leaking small amounts from where the nozzels screwed in to the block. Very mad and drunk by that time, I waited until this morning (afternoon actually) to replace the nozzels with the original ones that came with the GTZ and used some teflon tape. Got it done and so far no leaks!
But that meant that my i7 rig was not crunching for almost 14 hours

I don't know how many puppies died but it makes me very sad.........
I am also upset that the Swiftech pump and XSPC res top didn't fit anywhere in my ANTEC P182 case. So now it and the Swiftech MCR320 -QP are outside the case~

Chicken Patty · Oct 5, 2009

HammerON said:
Will I finally had time last night (I thought) to switch my i7 rig to wc. I got it all together and then when I started to fill the system I noticed that both the inlet and outlet on the GTZ was leaking small amounts from where the nozzels screwed in to the block. Very mad and drunk by that time, I waited until this morning (afternoon actually) to replace the nozzels with the original ones that came with the GTZ and used some teflon tape. Got it done and so far no leaks!
But that meant that my i7 rig was not crunching for almost 14 hours I don't know how many puppies died but it makes me very sad.........
I am also upset that the Swiftech pump and XSPC res top didn't fit anywhere in my ANTEC P182 case. So now it and the Swiftech MCR320 -QP are outside the case~

my i7 has been on and off as well. I'm having issues, I am trying new display drivers to see if it cures the problem. Gotta get this sorted out ASAP.

Chicken Patty · Oct 5, 2009

alright, trying to eliminate stuff that is causing my problems. I'm at stock clocks now. This way I can see if my issue was instability or what not.

Statistics Last Updated: 10/4/09 23:59:59 (UTC) [5 hour(s) ago]

1,422,676

[Ion] · Oct 5, 2009

HammerON said:
Will I finally had time last night (I thought) to switch my i7 rig to wc. I got it all together and then when I started to fill the system I noticed that both the inlet and outlet on the GTZ was leaking small amounts from where the nozzels screwed in to the block. Very mad and drunk by that time, I waited until this morning (afternoon actually) to replace the nozzels with the original ones that came with the GTZ and used some teflon tape. Got it done and so far no leaks!
But that meant that my i7 rig was not crunching for almost 14 hours I don't know how many puppies died but it makes me very sad.........
I am also upset that the Swiftech pump and XSPC res top didn't fit anywhere in my ANTEC P182 case. So now it and the Swiftech MCR320 -QP are outside the case~

I felt the same way when my quad was offline due to hardware issues (kept going to 80C+ under load and crashing)

Chicken Patty said:
alright, trying to eliminate stuff that is causing my problems. I'm at stock clocks now. This way I can see if my issue was instability or what not.

Statistics Last Updated: 10/4/09 23:59:59 (UTC) [5 hour(s) ago]

1,422,676

Excellent work everyone! Crunch on :toast:

Velvet Wafer · Oct 5, 2009

so now, i have to rework the farseeing. must been all the work with the 2 cases and the rad, thats misled me^^ maybe it will be 3 weeks

Chicken Patty · Oct 6, 2009

Statistics Last Updated: 10/5/09 23:59:59 (UTC) [2 hour(s) ago]

1,459,321

p_o_s_pc · Oct 6, 2009

looks like we are doing alot better now. lets see it over 1.5 again

Chicken Patty · Oct 6, 2009

p_o_s_pc said:
looks like we are doing alot better now. lets see it over 1.5 again

yeah. Paul should be back to full force I think he said by mid this week. I got all my rigs back up to full force. Got a little 300 Mhz overclock on my E7200 to boost things up a bit, default voltage. The QX is a bit harder to mess with because the board has sooo man y effin' options. so that's at a default of 3.0 Ghz. Still pumps about 2k or so a day

The i7 has it's issues sorted out, just needed to relax the timings a bit on the RAM, now LinX stable at the same settings as before

Chicken Patty · Oct 7, 2009

Statistics Last Updated: 10/6/09 23:59:59 (UTC) [4 hour(s) ago]

1,464,459

[Ion] · Oct 7, 2009

Excellent day everyone :toast:

Once HammerON gets his new i7 up, we should be back to 1.5 million

Chicken Patty · Oct 7, 2009

[Ion] said:
Excellent day everyone Once HammerON gets his new i7 up, we should be back to 1.5 million

yes!

Chicken Patty · Oct 8, 2009

Statistics Last Updated: 10/7/09 23:59:59 (UTC) [4 hour(s) ago]

1,367,335

Velvet Wafer · Oct 8, 2009

i have my 955 at stock atm, to test for crashes... im a little agitated about it cause ist freezes, no matter what i do...only the amount of time until this, differs...

Chicken Patty · Oct 8, 2009

Velvet Wafer said:
i have my 955 at stock atm, to test for crashes... im a little agitated about it cause ist freezes, no matter what i do...only the amount of time until this, differs...

my i7 is at stock too! Probably till next week, late next week.

Velvet Wafer · Oct 8, 2009

lol 35degrees load on the cores. 23-24 on the chip

HammerON · Oct 8, 2009

My i7 was down since about 10:00 am Alaska time as when I came home from work to grab something I noticed that Windows was froze. Ran Mem test and everything was fine. Set back to default settings and when I rebooted Windows still acted real sluggish and WCG had strange problems running. So I shut it off as I had to get back to work. After work I went to coach volleyball and all I could think of was those poor puppies

So I tried several things when I got home and with no avail. I reloaded Windows 7 and everything is peachy again. I don't know what the hell happened!!!

Velvet Wafer · Oct 8, 2009

HammerON said:
My i7 was down since about 10:00 am Alaska time as when I came home from work to grab something I noticed that Windows was froze. Ran Mem test and everything was fine. Set back to default settings and when I rebooted Windows still acted real sluggish and WCG had strange problems running. So I shut it off as I had to get back to work. After work I went to coach volleyball and all I could think of was those poor puppies
So I tried several things when I got home and with no avail. I reloaded Windows 7 and everything is peachy again. I don't know what the hell happened!!!

drive error? :wtf:

Duxx · Oct 8, 2009

We keep going downn?! Ahhhh I'm trying to pump some numbers

Chicken Patty · Oct 8, 2009

yeah seems like most of us have had issues lately. My i7 at stock is putting out almost half the points

Chicken Patty · Oct 9, 2009

Statistics Last Updated: 10/8/09 23:59:59 (UTC) [3 hour(s) ago]

1,381,035

Velvet Wafer · Oct 9, 2009

rig freezes at stock, after 10 hours:shadedshu

what now?

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	Aki
Processor	AMD 7800X3D
Motherboard	ASUS ROG STRIX X670E-A
Cooling	MSI MAG CoreLiquid E360
Memory	Patriot Viper Elite 5 32GB 6200
Video Card(s)	PNY RTX 4090 XLR8
Storage	Samsung 960 Pro 512 GB + WD Black SN850 1TB
Display(s)	Dell 32" Curved Gaming Monitor (S3220DGF)
Case	Corsair 5000D Airflow
Audio Device(s)	On-board
Power Supply	EVGA SuperNOVA 1000 G5
Mouse	Roccat Kone Pure
Keyboard	ASUS ROG Strix Scope II Wireless
Software	Win 11 Pro
Benchmark Scores	Always changing~

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS ROG Crosshair X670E Hero
Cooling	ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory	G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s)	ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage	Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s)	SAMSUNG 34-Inch Ultrawide 75Hz (Desk Games) // SAMSUNG 49-Inch Ultrawide 144Hz (Sim Racing Rig)
Case	Phanteks NV7
Power Supply	Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software	Windows 11 Pro

WCG Daily Numbers

Velvet Wafer

Attachments

p_o_s_pc

F@H&WCG addict

Velvet Wafer

xVeinx

HammerON

The Watchful Moderator

Chicken Patty

Chicken Patty

[Ion]

WCG Team Assistant

Velvet Wafer

Chicken Patty

p_o_s_pc

F@H&WCG addict

Chicken Patty

Chicken Patty

[Ion]

WCG Team Assistant

Chicken Patty

Chicken Patty

Velvet Wafer

Chicken Patty

Velvet Wafer

HammerON

The Watchful Moderator

Velvet Wafer

Duxx

Guest

Chicken Patty

Chicken Patty

Velvet Wafer

System Name	Niedersachsen / Ribe / Minsk
Processor	i3 3240 / i7-3520M / 4x Opteron 6376 @ 2.86GHz
Motherboard	BIOSTAR H61M / HP Q77 / Supermicro H8QG7
Cooling	Stock / Stock / 4x 1U G34
Memory	1x8GB / 2x4GB / 4x4GB
Video Card(s)	GTX260 / Intel HD 4000 / nVidia GT310
Storage	80GB Intel SSD / 256GB Intel SSD / 2x 60GB SSD (RAID1)
Display(s)	Dell 3007 + HP 2245w / 12.1" 1366x768 / None
Case	Antec NSK3480 / HP / Supermicro 1U
Audio Device(s)	Onboard
Power Supply	Enermax 500W / HP 130W / Supermicro Gold 1400W
Keyboard	IBM Model M
Software	Windows 7 (Niedersachsen/Ribe) / Linux Mint 17.2 (Minsk)