My Project Log:

Cold Storm · Mar 17, 2010

MKmods said:
get a 3" hole saw than you will have it to make 80mm fan cutouts in the future

I got one for 120mm fans.. should I try that, or make it 80mm? lol

Cold Storm · Mar 18, 2010

Got in the three San Ace fans from Binge today. MK, no matter what I've read, seen, it doesn't make up for how these fans are! Your right.

It's not as loud as I thought it would be for 12v. PUSHES TON of air.

MKmods · Mar 18, 2010

yep, not only does it push air it "FORCES" air unlike other fans, so if there is any restriction this fan is more likely to move air than others.

The other big deal is power draw, there are practically no fan controllers that can accommodate the draw of each fan.

Cold Storm · Mar 18, 2010

MKmods said:
yep, not only does it push air it "FORCES" air unlike other fans, so if there is any restriction this fan is more likely to move air than others.

The other big deal is power draw, there are practically no fan controllers that can accommodate the draw of each fan.

Yeah, I hear that... I'll just throw it to 7v to see how they do there.. It doesn't sound bad really.. well just one.. Doesn't sound as bad as the deltas! :roll:

Cold Storm · Mar 20, 2010

I got in today two things.. well Packages.

Koolance Pump top/res

More sleeving for the new fans.

So, this weekend, if not cutting that "exhaust" whole, I'll be rewiring and playing with fans.

But for some tease shots.

I really, really like this Koolance top/res. Bitspower is a sweet company, but I think Koolance really made a stride to get back into the game on top notch stuff.

& no... Not using the Frozen Q on this mod... I'll be doing it on my next adventure.

More Pictures:

On rad:

There is more to do. Once I get the case built again, I'll be playing around with it a bit. See what I need to do for the combo.

Chicken Patty · Mar 20, 2010

that pump is just beautiful :respect:

Random Murderer · Mar 20, 2010

that's a nice kit for the pump, especially when mounted on the rad like that.
i like that it has the in and out labeled, no more guessing!

Cold Storm · Mar 20, 2010

Guessing is half the fun! lol..

Nah, it should be good. Worse part is waiting on the block to come so I can play around with it.. lol

Random Murderer · Mar 20, 2010

Cold Storm said:
Guessing is half the fun! lol..

Nah, it should be good. Worse part is waiting on the block to come so I can play around with it.. lol

yea, a water loop is pretty useless without a block, lol.

Cold Storm · Mar 21, 2010

Well, fourth fan came in, right when I was going over to RM's Birthday Party!! :rockout:

So, it looks like tomorrow, I'll play around with sleeving, and setting it up via 5v or 7v fans..

Woot, some fun! Just gotta pull myself off of God Of War 3... :roll:

mlee49 · Mar 21, 2010

Wow that pump/rad combo is awesome! I cant wait for it to all come together.

sNiPeRbOb · Mar 21, 2010

+1 on how nice that pump/top/res combo came out! Nice little powerhouse you have there.

Cold Storm · Mar 28, 2010

Well, I don't have the time to fart around with the MM case yet.. Got a few things in the pipe works but nothing solid yet to get it going.

But, that doesn't mean I can't test the Koolance stuff I got? Now does it?

But, one problem... The pump/res, if on the rad, will be blocking air.. So, I go for my old trusty UN design bracket. But, that doesn't help me, due to how it's designed and the pump top bracket.. SO... Dremel time! :rockout:

worst part.. I only had one cutting wheel.. so it doesn't look to even.. lol

Looks pretty good.. IMO

Now, how am I going to run it?

and with this baby?

Well my trusty 120mm Danger Den rad.

I'll hook it up in the Raven2 case.. Once I leak test it.

Chicken Patty · Mar 28, 2010

That pump setup just caused me to jizz in my pants :eek:

Cold Storm · Mar 28, 2010

lets just hope that it works like it's suppose to..

Put it together in a few hours..

Chicken Patty · Mar 29, 2010

Cold Storm said:
lets just hope that it works like it's suppose to..

Put it together in a few hours..

Think positive dude, of course it will :toast:

Cold Storm · Mar 29, 2010

Chicken Patty said:
Think positive dude, of course it will

yes it will!

Air:

My load temps where getting close to 95c after 8h prime

Water:

and for how it looks..

Ghetto, but it works...

I'll put it on load tomorrow night.. Right now, I gotta clean up, get ready for a 16h day tomorrow, and get ready for my parents coming in Tuesday.

Binge · Mar 29, 2010

badass! That looks so ghetto it's hawt

I love it all!

Cold Storm · Mar 29, 2010

Binge said:
badass! That looks so ghetto it's hawt I love it all!

Thanks man... I tried doing it all inside.. The fan>rad>fan>pump was touching my ram... So that wasn't going to work.. lol.

Its just to test out the block. I'm hoping to have the MM case going again by the end of next weekend.. See how a quad rad would work with that koolance block!!

I might not be black, but I know how to do it

Ghetto Style*...

*I have lived in the ghetto for 3y of my life. I do, in no way, hate any type of person.

Now. to bed..

mlee49 · Mar 29, 2010

Dude those fittings make it! Really nice touch.

Chicken Patty · Mar 29, 2010

those BP fittings are sooo hawt! Ghetto but working out great dude :rockout:

MKmods · Mar 29, 2010

Like we talked about before I like the thought of the res being flush mounted with the top (easy as hell to fill)

To me the more hose /stuff you can hide in the top the better (keep it away from the GPUs..

Unlike everyone else I am not a fan of all the fittings, less is more.

(bad ass Bleach Wallpaper)

Cold Storm · Mar 29, 2010

MKmods said:
Like we talked about before I like the thought of the res being flush mounted with the top (easy as hell to fill)

To me the more hose /stuff you can hide in the top the better (keep it away from the GPUs..

Unlike everyone else I am not a fan of all the fittings, less is more.

(bad ass Bleach Wallpaper)

Thanks for the words. Yeah, in the MM case it's going to be totally different. I'm going to see what I can do with the pump/res for it to be on top of the case. I just gotta see about getting a different top for the MM case.. If you know a site where I can just got an alu top that I can paint that would be even better.. Problem with the MM case is that everything is crammed together at top.. I don't have the leway to try and put the pump on top.. Well, I can, but that requires me to run a hose to the top and I am not going to do something that goddy..

As for the fittings.. I am most likely going for compression fittings with the finish build.. I do love the different styles and the way they bend.. But, I know I can mod the MM case to have it all together without anything special..

Now... how can I mod the side panel of the MM case to "hinge" open? I think I could do that, quick connects, and boom pump/res there? lol.. I should of really thought about the case before going off and buying that...

MKmods · Mar 29, 2010

I can always make you new panels....(I can make you some quickies that you can experiment with if needed or nice ass finished ones)

I really like the drop in temps so far

(sorry to be a dick about the fittings, I know they wernt cheap. I dont like the compression ones either) :eek:

Cold Storm · Mar 29, 2010

MKmods said:
I can always make you new panels....(I can make you some quickies that you can experiment with if needed or nice ass finished ones)

I really like the drop in temps so far

(sorry to be a dick about the fittings, I know they wernt cheap. I dont like the compression ones either)

Shot ya a PM. We'll talk about panels within it all...

Yeah, I'm quite suprised that a single rad dropped it that much.. Best part.. We'll see how it does after I hook up a AMD rig to it... :roll:

Buying a AMD board and chip to hold me while the MSI board is being rma'ed...

Hey, it's all good man on the fittings. I remember well about our talk on fittings. We'll talk later on that.

System Name	Haro
Processor	AMD 1700x
Motherboard	AsRork x370 Taichi
Cooling	EK Custom Loop - CPU only
Memory	32gb G-Skill Trident Z
Video Card(s)	EVGA 1080 Superclock 2
Storage	Too Many
Display(s)	Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case	Cooler Master Cosmos II
Power Supply	Cooler Master V1000
Mouse	SteelSeries Rival 500
Software	Win10 Pro
Benchmark Scores	i5 750 4.62ghz pi runs // Evga FTW p55

System Name	Haro
Processor	AMD 1700x
Motherboard	AsRork x370 Taichi
Cooling	EK Custom Loop - CPU only
Memory	32gb G-Skill Trident Z
Video Card(s)	EVGA 1080 Superclock 2
Storage	Too Many
Display(s)	Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case	Cooler Master Cosmos II
Power Supply	Cooler Master V1000
Mouse	SteelSeries Rival 500
Software	Win10 Pro
Benchmark Scores	i5 750 4.62ghz pi runs // Evga FTW p55

System Name	Crossflow III
Processor	AMD 965 (4.04Ghz)
Motherboard	Asus Crosshair III
Cooling	Air
Memory	4 gigs Mushkin 7-7-7-20@1T
Video Card(s)	single 9800GT
Storage	Raptor 150's in Raid0
Display(s)	LG Flatron 24"
Case	Custom
Audio Device(s)	AuzenTech X-Raider W/OP637
Power Supply	Custom modded Corsair 750HX
Software	Win 7 64/Solaris Utility
Benchmark Scores	3DMark06--21963 so far

System Name	Haro
Processor	AMD 1700x
Motherboard	AsRork x370 Taichi
Cooling	EK Custom Loop - CPU only
Memory	32gb G-Skill Trident Z
Video Card(s)	EVGA 1080 Superclock 2
Storage	Too Many
Display(s)	Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case	Cooler Master Cosmos II
Power Supply	Cooler Master V1000
Mouse	SteelSeries Rival 500
Software	Win10 Pro
Benchmark Scores	i5 750 4.62ghz pi runs // Evga FTW p55

System Name	Haro
Processor	AMD 1700x
Motherboard	AsRork x370 Taichi
Cooling	EK Custom Loop - CPU only
Memory	32gb G-Skill Trident Z
Video Card(s)	EVGA 1080 Superclock 2
Storage	Too Many
Display(s)	Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case	Cooler Master Cosmos II
Power Supply	Cooler Master V1000
Mouse	SteelSeries Rival 500
Software	Win10 Pro
Benchmark Scores	i5 750 4.62ghz pi runs // Evga FTW p55

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS ROG Crosshair X670E Hero
Cooling	ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory	G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s)	ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage	Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s)	SAMSUNG 34-Inch Ultrawide 75Hz (Desk Games) // SAMSUNG 49-Inch Ultrawide 144Hz (Sim Racing Rig)
Case	Phanteks NV7
Power Supply	Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software	Windows 11 Pro

System Name	TOO MUCH RADIATOR! \| The TV Box a.k.a. The Shoebox
Processor	Core i7 4930K @ 4.5GHz \| Core i5 6600K @ 4.5GHz
Motherboard	Asus X79 Rampage IV Extreme \| Asus Z170i Pro Gaming
Cooling	Custom water on CPU and GPU, dual 360mm radiators \| Corsair H80i
Memory	4x 8GB G.Skill TridentX DDR3-1600 \| 2x 4GB G.Skill RipJaws 4 DDR4-3000
Video Card(s)	Sapphire AMD R9 295x2 \| PowerColor AMD HD7970
Storage	Samsung SSD 830 256GB, various others \| 2x 1TB Seagate Barracudas in RAID1
Display(s)	Dell U2713HM 2560x1440 IPS \| Panasonic TC-L32E5 1080p IPS TV
Case	Thermaltake Suppressor F51 (stripped down to hold two radiators) \| Cooler Master Elite 130
Audio Device(s)	RM-DAC -> Xiang Sheng 708b -> Sennheiser HD650 \| HDMI sound device on 7970
Power Supply	LEPA G1600-MA 1600W \| Corsair CX750M 750W
Software	Win 10 64
Benchmark Scores	over 9000 BungholioMarks, "Bitchin' Fast"

System Name	The Dove Box Rev 5.0
Processor	9800x3D
Motherboard	Asus 870E STRIX
Cooling	Custom Water
Memory	32 GB 6400 MTs
Video Card(s)	Asus 3080 TUF
Storage	2TB Crucial T705
Display(s)	32" LG 1440p 180hz
Case	Lian Li O11 Dynamic
Audio Device(s)	ON BOARD FTW
Power Supply	Corsair 1000W
Mouse	Corsair something
Keyboard	Steelseries
Software	Win 10 64x

System Name	MörderPanzer
Processor	AMD Phenom II 940@3.3Ghz (200x16.5 1.35vcore)
Motherboard	MSI K9N2 SLI Platinum
Cooling	Koolance CPU-340, Swiftech MCR220 w/ Medium Yates, MCP655 Vario, 1/2-3/4 PC Blue Tubing
Memory	Crucial DDR2 800 Ballistix (4X1GB)
Video Card(s)	XFX HD4890 1GB
Storage	WD Blue 500GB
Display(s)	22" Westinghouse
Case	NZXT Panzerbox
Audio Device(s)	Soundblaster XFi Gamer
Power Supply	Rosewill 600w
Software	W7

System Name	Molly
Processor	i5 3570K
Motherboard	Z77 ASRock
Cooling	CooliT Eco
Memory	2x4GB Mushkin Redline Ridgebacks
Video Card(s)	Gigabyte GTX 680
Case	Coolermaster CM690 II Advanced
Power Supply	Corsair HX-1000

My Project Log:

Battosai

Battosai

Case Mod Guru

Battosai

Battosai

The Anti-Midas

Battosai

The Anti-Midas

Battosai

New Member

Battosai

Battosai

Battosai

Overclocking Surrealism

Battosai

Case Mod Guru

Battosai

Case Mod Guru

Battosai