GTX 470 Owners

Pickles24 · Jun 12, 2010

Here is the EK FC-470 I jut installed. I put it to some hard core testing last night. The most came from some real time rendering and the Cuda toolbox. It pretty much evened things out with the i7 and never got over 40c. I also played a few hours for BBC2 everything maxed except 32xAA, still never over 45c.

My conclusion is, on a loop with 1 BlackIce Xtreme III, my i7 and 470 extremely stressed are cooler then idol on air cooling. :rolleyes:

That's cold when it's 100°f outside.

erixx · Jun 14, 2010

I have made a slow fan up to 50ºC profile with Afterburner, then 50ºC=50%, 60ºC=60%, up to 100ºC=100%, and I am happy. The stock fan speeds are to slow and silent

Great card and SOLID "as it should be"!

trt740 · Jun 15, 2010

Well I can confirm my old 480 gtx fan wasn't any louder than my current BFG maxcore fan. FYI at 700/1512/2500 this 260 gtx kicks all my games in the ass . Still miss my old 480 gtx but for my friends new build I think I will use a 5850. I picked one up new for him at 269.99 and no 470 gtx is that cheap so ATI it will be thanks guys for the info. Alot of good info was posted here about the 470 gtx but it became about money.

Jack Daniels · Jun 21, 2010

Fan IDLE’s at 40% (1400RPM's), highest LOAD is about 70% (2950RPM's) @ Stock fan settings. This typically keeps the card at 50c IDLE and about 88c LOAD, lowest temp was 42c, and highest temp was 93c. At 70% you can start to hear the fan more easily.

Jack Daniels · Jun 21, 2010

Jack Daniels said:
Fan IDLE’s at 40% (1400RPM's), highest LOAD is about 70% (2950RPM's) @ Stock fan settings. This typically keeps the card at 50c IDLE and about 88c LOAD, lowest temp was 42c, and highest temp was 93c. At 70% you can start to hear the fan more easily.

Oops. Sorry about that. The boss walked in and I smacked on the wrong keys.

Anyways, was going to ask whether 88°C is OK at full load. I use stock fan speeds, as well, and have been worried that 88°C is a wee bit high? Or is it? I do not like to mess with the hardware and usually keep to stock settings or auto. Do I need to worry when my GPU hits 88°C? MY GPU temps do not exceed this level, from what I've observed thus far.

Thanks and again, I apologize for the double post.

Jack Daniels · Jun 21, 2010

Are stock settings OK?

TheOne said:
Was using two 9600GT's, a Recertified XFX PV-T96G-YHF Single-Slot, and a MSI N9600GT-T2D512-OC Dual-Slot, the XFX would IDLE at about 54c (35% Fan Speed), but would never go over 68c (52% Fan Speed). The GTX 470 I have is quieter than my XFX card at IDLE and at LOAD.

Fan IDLE’s at 40% (1400RPM's), highest LOAD is about 70% (2950RPM's) @ Stock fan settings. This typically keeps the card at 50c IDLE and about 88c LOAD, lowest temp was 42c, and highest temp was 93c. At 70% you can start to hear the fan more easily.

I use stock fan settings on my reference GTX 470, as well. Is 88°C all right insofar as GPU temperatures go?

sneekypeet · Jun 21, 2010

As long as the card continues to run it is "safe". Temperatures getting too high will send the driver into recovery mode, which should send you looking for the cause

TheOne · Jun 21, 2010

Jack Daniels said:
I use stock fan settings on my reference GTX 470, as well. Is 88°C all right insofar as GPU temperatures go?

Should be fine, so unless you start seeing artifacts or having other issues it should be perfectly fine.

W1zzard's ASUS GTX 470 Review - http://techpowerup.com/reviews/ASUS/GeForce_GTX_470/33.html

W1zzard said:
Idle temperatures are comfortably low, a lower fan speed in trade for higher temperatures would have helped with the idle noise. Under load the card is at what I would consider a healthy maximum for long term use.

DanishDevil · Jun 21, 2010

Well, I moved on. Well, went crawling back to a 5870

CDdude55 · Jun 21, 2010

DanishDevil said:
Well, I moved on. Well, went crawling back to a 5870

How dare you betray us!!! lol

5870's are awesome cards, you should of gave me your GTX card so i could go SLI with my current 470.

DanishDevil · Jun 21, 2010

Returned it for purchase price, so unless you wanted to pay retail + 9.75% tax + shipping...

CDdude55 · Jun 22, 2010

DanishDevil said:
Returned it for purchase price, so unless you wanted to pay retail + 9.75% tax + shipping...

Ahh ok nvm. :laugh:

DanishDevil · Jun 22, 2010

Yep, that's why I went ahead and returned it.

largon · Jul 2, 2010

It's been some 6 months or w/e since I've even logged in @ TPU. Looks like the place is still up and running.

Anyways, I was poking my GTX465 (unlocked to full GTX470) with a screwdriver - lo and behold, the IHS fell off.

.
.
.
Err, okay, it didn't just fall off...
:rolleyes:

It's the same terrible gray excuse-of-a-TIM on Fermi nV used before on G200 and G80.

SteelSix · Jul 3, 2010

largon said:
It's been some 6 months or w/e since I've even logged in @ TPU. Looks like the place is still up and running.

Anyways, I was poking my GTX465 (unlocked to full GTX470) with a screwdriver - lo and behold, the IHS fell off.

[url]http://largon.wippiespace.com/fermi_disintegrated_hs_s.jpg[/URL] [url]http://largon.wippiespace.com/fermi_disintegrated_hs_goop_s.jpg[/URL]
.
.
.
Err, okay, it didn't just fall off...

It's the same terrible gray excuse-of-a-TIM on Fermi nV used before on G200 and G80.

Wow that's a great pic. I never thought of removing a heatspreader, but wow, same crappy TIM under there? Very tempting.

The dark colored stuff is an adhesive? It looks kinda spongy. Can you describe it? How did you adhere heatspreader back on?

eidairaman1 · Jul 3, 2010

lmao, whatya gonna do if the card dies now from prying that IHS off?

largon said:
It's been some 6 months or w/e since I've even logged in @ TPU. Looks like the place is still up and running.

Anyways, I was poking my GTX465 (unlocked to full GTX470) with a screwdriver - lo and behold, the IHS fell off.

[url]http://largon.wippiespace.com/fermi_disintegrated_hs_s.jpg[/URL] [url]http://largon.wippiespace.com/fermi_disintegrated_hs_goop_s.jpg[/URL]
.
.
.
Err, okay, it didn't just fall off...

It's the same terrible gray excuse-of-a-TIM on Fermi nV used before on G200 and G80.

sneekypeet · Jul 3, 2010

Come on man its freeking largon....this man has been abusing hardware ond voltmodding things since we were in diapers...I think he is well beyond caring much at this point :roll:

SteelSix · Jul 3, 2010

eidairaman1 said:
lmao, whatya gonna do if the card dies now from prying that IHS off?

Looks like he did a very nice job getting it off. Routine TIM replacement and reapplication from there. Curious about that adhesive though. How tough was it held on, how tough was it to remove and replicate?

Curtain's pulled away, well worth the time to photograph.. :respect:

arnoo1 · Jul 3, 2010

have you put back on that ihs or not?, if you did not does it lower your idle and load temp?

largon said:
It's been some 6 months or w/e since I've even logged in @ TPU. Looks like the place is still up and running.

Anyways, I was poking my GTX465 (unlocked to full GTX470) with a screwdriver - lo and behold, the IHS fell off.

[url]http://largon.wippiespace.com/fermi_disintegrated_hs_s.jpg[/URL] [url]http://largon.wippiespace.com/fermi_disintegrated_hs_goop_s.jpg[/URL]
.
.
.
Err, okay, it didn't just fall off...

It's the same terrible gray excuse-of-a-TIM on Fermi nV used before on G200 and G80.

eidairaman1 · Jul 3, 2010

hmm I still wonder if the IHS on a Core 2 or a Core i7 are removable?

largon · Jul 4, 2010

SteelSix said:
The dark colored stuff is an adhesive? It looks kinda spongy. Can you describe it?

The adhesive is some sort of solid epoxy and I don't think it could be cut by a blade. But it's brittle enough for the seal to be broken by force.

SteelSix said:
How did you adhere heatspreader back on?

arnoo1 said:
have you put back on that ihs or not?, if you did not does it lower your idle and load temp?

I had to put it back on but didn't use any adhesive, it's just sandwiched between the GPU and a MCW60.
I couldn't leave it out at the moment since I don't have a waterblock compatible with an IHS-less GTX470 that has the stock cooler's baseplate installed. So, I "had to" flip the IHS upside down and just apply proper TIM. I'll leave out the IHS as soon as I find a way to deal with the wateblock-incompatibility problem caused by the height of the frontplate around the GPU.

But I'm sure at least load temps decreased by a fair amount as the rubbery stock IHS-core TIM actually prevents contact between the two. As usual for me, impatience won while I was pulling the stock cooler off and was about to install the waterblock and I decided to save a step and rip the IHS out before even running it with an intact IHS. ¦|

eidairaman1 said:
lmao, whatya gonna do if the card dies now from prying that IHS off?

Don't worry, I've got an identical spare.
¦]

Think I'll do a temps comparison (cum-IHS vs. sine-IHS) when I decap the second one.

eidairaman1 said:
hmm I still wonder if the IHS on a Core 2 or a Core i7 are removable?

Some low-end C2Ds have a conventional non-adhesive TIM, some have the IHS kind of "soldered" to the core with an tin-indium alloy which melts at somewhere around 90ºC. Heat the IHS appropriately and you'll hear a *pop*. There's even no need to force it by hand. Few razor blades inserted at the corners make the event faster / more dramatic.
I haven't toyed with i7s, but I know they're are also soldered with similar or same stuff as C2Ds.

Here's my E6400back in september of 2006 after decapping the bugger. Unfortunately, it did not survive decapping as I foolishly bent the substrate of the CPU too much while (needlessly) levering the IHS. :eek:

eidairaman1 · Jul 4, 2010

Erm, I seen a review where they took the IHS off, I say no thanks, Rather Lap the IHS than try to remove it nowadays.

http://www.overclock.net/intel-cpus/305443-ihs-removals-how-do-should-i.html

SteelSix · Jul 4, 2010

To the OP..

Got a little sidetracked by the sight of a naked Fermi, I meant to contribute OP..

I'm running 470 SLI right now. 20 days left to step-up, I'm torn. I'd like to play with 480's, but OC'd 470 SLI is pretty sweet. I like knowing that 470 didn't undergo a last minute neuter like big brother did. Overall it's a solid choice. As for competitive products, I've run 5870 single and CF. Had to try Fermi though, happy so far..
http://i133.photobucket.com/albums/q62/steelsix/IMG_0198.jpg

Muhad · Jul 4, 2010

My 480 is quiet and runs cool. I use MSI AfterBurner to adjust the fan scaling.

I wouldn't think the 470 would be any worse. And the case cooling is important too.

Stak · Jul 6, 2010

I like my msi gtx470. Recommended for everyone. Fan noise is good till 80%. 90C is highest temp i have seen at my clocks at fan of 75(manual). Excellent price/performance ratio. No complaint at all.

. If you look at my specs you see i only have a COoLER MASTER(yes no corsair!) 620w PSU and it runs perfectly

System Name	El Niño
Processor	i7 920 d0
Motherboard	GIGABYTE x58A-ud7 \| f7w
Cooling	Duniek GTZ \| BlackIce Xtreme III
Memory	6x2g OCZ Obsidian 1600
Video Card(s)	GTX 470 \| EK FC470
Storage	2x Western Digital 500gig
Display(s)	Acer G245Hbmid Black 24"
Case	Obsidian 800D
Power Supply	Antec Quattro 1000W
Software	Linux Mint 9 \| Win 7 x64

System Name	Apple Bite
Processor	Intel I5
Motherboard	Apple
Memory	40gb of DDR 4 2700
Video Card(s)	ATI Radeon 500
Storage	Fusion Drive 1 TB
Display(s)	27 Inch IMac late 2017

System Name	EVA-01
Processor	Intel i7 13700K
Motherboard	Asus ROG Maximus Z690 HERO EVA Edition
Cooling	ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory	PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s)	Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage	Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s)	Asus ROG SWIFT OLED PG42UQ
Case	Thermaltake Core P3 TG
Audio Device(s)	Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply	be quiet DARK POWER PRO 12 1500W
Mouse	ROG STRIX Impact Electro Punk
Keyboard	ROG STRIX Scope TKL Electro Punk
Software	Windows 11

System Name	Desktop
Processor	AMD Ryzen 5 5600X [3.7GHz/4.6GHz][6C/12T]
Motherboard	ASUS TUF Gaming X570-PRO [X570]
Cooling	Cooler Master Hyper 212 RGB Black Edition
Memory	G.SKILL Ripjaws V Series 32GB [DDR4 3600][2x16GB][16-19-19-39@1.35V]
Video Card(s)	ASUS KO GeForce RTX 3060 Ti V2 OC Edition 8GB GDDR6 [511.65]
Storage	[OS] Samsung 970 Evo 500GB \| [Storage] 980 1TB \| 860 Evo 1TB \| 850 Evo 500GB \| Seagate Firecuda 2TB
Display(s)	LG 27GL850 [27"][2560x1440@144Hz][Nano IPS][LED][G-SYNC Compatible][DP]
Case	Corsair Obsidian 750D
Audio Device(s)	Realtek ALC S1200A High Definition Audio CODEC
Power Supply	EVGA SuperNOVA 1000 G1+ [+12V: 83.3A 999.6W][80 Plus Gold]
Mouse	Logitech M570 Trackball
Keyboard	Corsair Gaming K55 RGB
Software	Microsoft Windows 10 Pro [21H1][64-bit]

System Name	Big Devil
Processor	Intel Core i5-2500K
Motherboard	ECS P67H2-A2
Cooling	XSPC Rasa \| Black Ice GT Stealth 240 \| XSPC X2O 750 \| 2x ACF12PWM \| PrimoChill White 7/16"
Memory	2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s)	EVGA GTX 780 ACX SC
Storage	Intel 520 Series 180GB + WD 1TB Blue
Display(s)	HP ZR30W 30" 2650x1600 IPS
Case	Corsair 600T SE
Audio Device(s)	Xonar Essence STX \| Sennheisser PC350 "Hero" Modded \| Corsair SP2500
Power Supply	ABS SL 1050W (Enermax Revolution Rebadge)
Software	Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores	Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps \| Razer Deathadder Black

GTX 470 Owners

Pickles24

New Member

erixx

trt740

Jack Daniels

New Member

Jack Daniels

New Member

Jack Daniels

New Member

sneekypeet

not-so supermod

TheOne

DanishDevil

CDdude55

Crazy 4 TPU!!!

DanishDevil

CDdude55

Crazy 4 TPU!!!

DanishDevil

largon

SteelSix

eidairaman1

The Exiled Airman

sneekypeet

not-so supermod

SteelSix

arnoo1

eidairaman1

The Exiled Airman

largon

eidairaman1

The Exiled Airman

SteelSix

Muhad

Stak

New Member

System Name	CDdude's Rig!
Processor	AMD Athlon II X4 620
Motherboard	Gigabyte GA-990FXA-UD3
Cooling	Corsair H70
Memory	8GB Corsair Vengence @1600mhz
Video Card(s)	XFX HD 6970 2GB
Storage	OCZ Agility 3 60GB SSD/WD Velociraptor 300GB
Display(s)	ASUS VH232H 23" 1920x1080
Case	Cooler Master CM690 (w/ side window)
Audio Device(s)	Onboard (It sounds fine)
Power Supply	Corsair 850TX
Software	Windows 7 Home Premium 64bit SP1

System Name	Ladpot ◦◦◦ Desktop
Processor	R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard	HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling	Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory	2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s)	RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage	Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s)	HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case	Lian Li PC-A16B
Audio Device(s)	Onboard
Power Supply	Corsair AX860i
Mouse	Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard	Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software	W11 x64 ◦◦◦ W10 x64
Benchmark Scores	It does boot up? I think.

System Name	PCGOD
Processor	AMD FX 8350@ 5.0GHz
Motherboard	Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling	Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory	16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s)	AMD Radeon 290 Sapphire Vapor-X
Storage	Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s)	NEC Multisync LCD 1700V (Display Port Adapter)
Case	AeroCool Xpredator Evil Blue Edition
Audio Device(s)	Creative Labs Sound Blaster ZxR
Power Supply	Seasonic 1250 XM2 Series (XP3)
Mouse	Roccat Kone XTD
Keyboard	Roccat Ryos MK Pro
Software	Windows 7 Pro 64

System Name	gaming system
Processor	2600k @ 4.2 ghz
Motherboard	MSI Z77 MPower
Cooling	Thermalright ultra extreme 120 rev.C w/noctua NF-S12B push/pull
Memory	16gb corsair vengeance 2400 c11 @1.5 v/
Video Card(s)	GB gtx670 WF3x sli @1080/1372/6660(core/boost/mem)
Storage	2x samsung 850evo 250gb raid 0 ,2tb wdblack, 3TB wd purple
Display(s)	Samsung Syncmaster P2770FH, asus VH242t/19" lg 1440x900
Case	fractal design r4
Audio Device(s)	onboard
Power Supply	Corsair HX1050
Mouse	Razer abyssus
Keyboard	corsair k70
Software	Windows 10 pro x64

System Name	Junkamatic
Processor	i7
Motherboard	Z77
Cooling	Thermaltake
Memory	Corsair
Video Card(s)	Evga GTX770
Storage	4 Seagate Satas
Display(s)	VW266H
Case	Lian-Li A77B
Audio Device(s)	on-board
Power Supply	Corsair HX1000w
Software	W7

System Name	nGigabyte GTX-58 Blue Flash
Processor	Intel Core I7 920 @3.885 (3.7 with turbo)
Motherboard	Gigayte EX-58 UD3R
Cooling	Scythe Mugen 2
Memory	Kingston Value Ram DDR3 @1800 Mhz 6Gb
Video Card(s)	MSI N470GTX OC 751/1501
Storage	WD 640 GB 7200 rpm
Display(s)	LG Flatron LW207
Case	Antec 902 with cooler master extra side panel fan(blue led)
Audio Device(s)	on board HD
Power Supply	Cooler Master gold 800W
Software	Win 7 64 bit
Benchmark Scores	Above avg