- Joined
- Jul 20, 2008
- Messages
- 4,016 (0.67/day)
- Location
- Ohio
System Name | Desktop|| Virtual Host 0 |
---|---|
Processor | Intel Core i5 2500-K @ 4.3ghz || 2x Xeon L5630 (total 8 cores, 16 threads) |
Motherboard | ASUS P8Z68-V || Dell PowerEdge R710 (Intel 5520 chipset) |
Cooling | Corsair Hydro H100 || Stock hotplug fans and passive heatsinks |
Memory | 4x4gb Corsair Vengeance DDR3 1600 || 12x4gb Hynix DDR3 1066 FB-DIMMs |
Video Card(s) | MSI GTX 760 Gaming Twin Frozr 4GB OC || Don't know, don't care |
Storage | Hitachi 7K3000 2TB || 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure |
Display(s) | ViewSonic VA2349S || remote iDRAC KVM console |
Case | Antec P280 || Dell PowerEdge R710 |
Audio Device(s) | HRT MusicStreamer II+ and Focusrite Scarlett 18i8 || Don't know, don't care |
Power Supply | SeaSonic X650 Gold || 2x870w hot-swappable |
Mouse | Logitech G500 || remote iDRAC KVM console |
Keyboard | Logitech G510 || remote iDRAC KVM console |
Software | Win7 Ultimate x64 || VMware vSphere 6.0 with vCenter Server 6.0 |
Benchmark Scores | Over 9000 on the scouter |
http://www.techpowerup.com/forums/attachment.php?attachmentid=45205&stc=1&d=1326284113
What you need is:
Tinfoil - Kill the Tinman and cut him down if you need it
Paper - Kill Paperboy and steal his newspaper if you need it
Chopsticks - Kill Mr Miyagi from the "Karate Kid"and rob his old fat ass blind and after you got money of his corpse, go buy some chopsticks. Or you can just steal some but man, who wants to do that.
Rubberbands - Go rob Yoyo or something. Shit if you can't afford those you are too ghetto for me
Instuctions:
Tape/glue the Tinfoil to the paper. Then shove the chopsticks through and bend the tinfoil glued paper till it makes a parabola. Then use the rubberband to mount it to your router's antennas. Remember to rotate the parabolas to the general direction of your computer for the best results.
http://fearless-assassins.com/forum/blog/22/entry-92-increase-your-wireless-connection-the-ghetto-way/
Been there, done that.
What do you do when your signal sucks? Buy a 16dbi antenna and build a giant parabolic reflector.
http://img.techpowerup.org/100512/IMG_0976-01.jpg
http://img.techpowerup.org/100512/IMG_0980-01.jpg
What do you do when your adapter overheats? Strip it, slap on some heatsinks, and wire a couple fans to a 5v wall-wart.
http://img.techpowerup.org/100512/IMG_0981-01.jpg
All the crazy rope is so I could mount it and have full control over position and orientation. However, I didn't want to punch holes in the reflector and I didn't want to use pulleys either, so I messed around until I had a harness and then messed around some more until I had the rope going through a couple hooks where I can just pull on it to adjust orientation and them clamp it in place.
And the results? Based on measurements from the Ralink utility, I used to get about -88dBm strength and 40-50% link quality. Now I average -74 to -70 dBm strength and 70-80% link quality. Signal noise went up too, but only a few dBm.
Not using it anymore though; parents finally let me just use their connection.