Sexy Hardware Close-Up Pic Clubhouse.

[Peter1986C]

Snapshot of our new little toy.

http://img.techpowerup.org/120720/20120720_202402.jpg

17 cm 6.7 inch

That looks like a GeForce GTS x40 or x50.

 

[Shou Miko]

@ Puma99dkl I'm always telling people win7 runs quite well on old hardware infact a mate of mine has win7 x86 running on an AthlonXP 3200+ with 2GB ddr400 and an AGP radeon HD3650 and an 250GB SATA2 HDD ...ok so it's not a speed demon but it does what he wants and gets him there eventually

yeah, even my sis on her small Asus Seashell with a Intel Atom and 2gigs of ram she was like Windows 7 r u for real and it does aero aswell so it's good.

but Athlonite the only thing here is it was SATA-1 (SATA1.5GB/s) so the SSD was not running 110% speed i could feel that but it is faster than normal HDD even through that speed limit

 

[Crap Daddy]

That looks like a GeForce GTS x40 or x50.

It's a GTX560 SE.

 

[(FIH) The Don]

 

[(FIH) The Don]

 

[(FIH) The Don]

 

[uber_cookie]

Nothing special but here is my submission

 

[Shou Miko]

r u going to run SLi uber_cookie? ^^;

 

[uber_cookie]

r u going to run SLi uber_cookie? ^^;

Yep got pair of them on day1 waiting for EK Asus DC2 blocks to come out

 

[(FIH) The Don]

the new EK blocks are just fappalicius

 

[HammerON]

Agree!!!
Can't wait to see how they cool

 

[Shou Miko]

Yep got pair of them on day1 waiting for EK Asus DC2 blocks to come out

nice lucky u what CPU r u planning about putting in the micro-beat board? ^^

asking bcs i got the same board just Gen3 version running a i5-2500k @ 4,5ghz

 

[uber_cookie]

nice lucky u what CPU r u planning about putting in the micro-beat board? ^^

asking bcs i got the same board just Gen3 version running a i5-2500k @ 4,5ghz

Got everything already sorted, 2700 was running at @5.0 for bench and it is running at 4.5 24/7. Once all the blocks are in place, will try 5.2-5.5 as 24/7 and also overclock GTXs since I have not tried that yet.

Also to keep temps lower, looking to add TEC as water chiller

Just posted build log, not very good at documenting builds got some mesh panel to go around, but have not yet taken photos
http://www.techpowerup.com/forums/showthread.php?p=2681760#post2681760

Specs are:

Intel i7 2700k
Corsair Vengeance Low Profile (white) 16gb (4x4gb)
ASUS Maximus IV GENE-Z
ASUS GTX670-DC2-2GD5 Sli
Corsair Force Series 3 Series 60GB SSD
2x Corsair Force Series 3 Series 120GB SSD

Additions:

Icy Dock MB994SP-4S 4 in 1 SAS / SATA Hot Swap Backplane

Monsoon Compressor fittings
EK-Supremacy - Acetal + Nickel
Ek 360 and 120 Coolstream radiators
D5 Vario pump with EK top Rev2
150 Res (not sure if going for Rev2)

 

[Shou Miko]

i am testing this lille system my dad gived to me, it's a little Intel Core 2 Duo E5300 if i don't remember wrong in a Gigabyte GA-G31M-ES2L Rev 1.1 as u can see on some of the connector pins it have had a hard live not my dad's fault i dunno where he got it.

i took 1 stick of Kingston KHX6400D2LLK2/2GN which is a 1gb stick and it booted so i updated the board from bios F8 to F10 which is the newest but now i got more options and they only did Rev 1.x bios' so i am like dual IDE options and i only got 1 IDE connector and a floppy

i did a quick memtest86+ test and ino the board is using DDR2 but apparently memtest86+ things it's DDR3 check the "Type: "

and yes it's hooked up to my Intel X25-M G2 80GB SSD Drive which didn't wanna boot so reinstalling Windows 7 Ultimate SP1 again ~.~

but thinking about using it as a mini-htpc or a cruncher but i dunno actually bcs my Gaming rig is running 24-7 bcs i use it as a htpc aswell so i maybe end up been out the pins and sell it off to someone who will use it

 

[dj-electric]

I say, slap a 30$ cooler on it and stretch its frequency first. Then, we'll see

 

[Shou Miko]

I say, slap a 30$ cooler on it and stretch its frequency first. Then, we'll see

maybe dunno, i am thinking about putting it in my Lian Li case, bcs i don't think i will be modding it as much as i want, so i will maybe just swap it in there and with low-noise fans in front and one in the side there should be air enough for not ever heating.

oh and it's not a C2D but a Pentium E5300 build on the Wolfdale 45nm core ^^;


now it's in the case and i ran a custom 400mb IntelBurnTest since there is only 1gb of memory in it and a low-noise fan (almost) directly at the side of the cpu fan i get max temps of 50~51c now that bad i think ^^

oh and not to forget that little Intel X25-M G2 80gb is making it run fast and smooth and even boots and install programs at a nice speed i can wait on ^^;

 

[uber_cookie]

maybe dunno, i am thinking about putting it in my Lian Li case, bcs i don't think i will be modding it as much as i want, so i will maybe just swap it in there and with low-noise fans in front and one in the side there should be air enough for not ever heating.

oh and it's not a C2D but a Pentium E5300 build on the Wolfdale 45nm core ^^;


now it's in the case and i ran a custom 400mb IntelBurnTest since there is only 1gb of memory in it and a low-noise fan (almost) directly at the side of the cpu fan i get max temps of 50~51c now that bad i think ^^


oh and not to forget that little Intel X25-M G2 80gb is making it run fast and smooth and even boots and install programs at a nice speed i can wait on ^^;

Corsair H100 or H80 works great in these. I was using H100 as temp water cooling in v351 that is now undergoing mods for 360 and 120 rad.

 

[Shou Miko]

Corsair H100 or H80 works great in these. I was using H100 as temp water cooling in v351 that is now undergoing mods for 360 and 120 rad.

at one point i was thinking about modding it so i could have a Intel RTS2011LC in that case together with my system but, i still need to cut it, bcs my GTX 680 is too long bcs of the 3,25" slot for floppy drive, and maybe need to cut more than just that away ._.

i also recently got this Asus GeForce EN9800GT/DI/1GD3/A Card from my dad

And yes ino it got a "Tail" but it's so i don't loose that 2x4pins molex to 6pins pci-express adaptor cable ^^;

Fail yes, but u can read the labels better x:

Output connectors

 

[Random Murderer]

Snapshot of our new little toy.

http://img.techpowerup.org/120720/20120720_202402.jpg

17 cm 6.7 inch

BWAHAHA it looks so dainty!
Reminds me of the reference GTX670!

 

[Crap Daddy]

BWAHAHA it looks so dainty!
Reminds me of the reference GTX670!

It's in fact exactly 16.8 cm and come to think of it it's almost the exact size of the GTX670 PCB and it has 2 x 6 pin power. I was really surprised by the dimension since I ordered the card and in the few pictures available it looked bigger.

 

[Random Murderer]

It's in fact exactly 16.8 cm and come to think of it it's almost the exact size of the GTX670 PCB and it has 2 x 6 pin power. I was really surprised by the dimension since I ordered the card and in the few pictures available it looked bigger.

I'm waiting to see tri-SLI with watercooled, reference 670s. It's gonna look funny to see those tiny cards. What's sad is my old x1600xt is actually longer than both your card and the 670 and is nowhere near as powerful.

 

[(FIH) The Don]

 

[mlee49]

mmmm micro-ATX...

 

[Shou Miko]

mmmm micro-ATX...

if u mean what The Don is posting it's a ITX board smaller than micro-atx

 

[mlee49]

derp, it's been a while.

is Mini-ATX the same as ITX? I'm confused

Also, Don what case you putting that in? Or is it just for pictures?