The GTX 400 owners club!

[Flibolito]

My 480 runs about as good as a 580 at almost 900MHz. So while the 680 is a beast of a card the 480 definitely holds its own. I think if I put the WQHD monitor on the 480 it would start to struggle and that's where the 680 shines right now.

 

[claylomax]

This is a list of the voltage "notches":
0.925 (some 480's can run stock clocks at this voltage)
0.938
0.950
0.963 (GTX 480 idle voltage)
0.975
0.987 (load voltage of most reference 480's)
1.000 (load voltage of some reference 480's)
1.013 (as above)
1.025 (as above)
1.038 (as above)
1.050 (as above)
1.063 (as above, this is the highest I've seen, EVGA)
1.075 (some factory overclocked cards have this voltage, eg: Gigabyte SOC)
1.088 (as above)
1.100
1.113
1.125
1.138 (max voltage available by default in Afterburner, you can go higher though)

This list also applies to the GTX 470; however I don't know the idle/load voltage that most reference 470's ship with.

 

[Wrigleyvillain]

I'm still amazed at how this thing eats my sli gtx285s alive......

I'm really not...

 

[trt740]

Back in the club, my son wanted his GTX 480 back because his room was too cold using a GTX 460 Hawk.

 

[Wrigleyvillain]

lol

 

[johnspack]

Wow, claylomax, that's a cherry chip you got there. I'm stuck at 860 no matter how much voltage I pump into it. Luck of the draw I guess!
Edit: heh, updated member list....

 

[TB13]

Got my block today and threw it into my crappy loop. Idles around 40c and saw a max of 74c in Skyrim at 99% gpu usage. I know, these temps aren't that impressive but it is in a very small loop with 1/4in ID tubing and a H40 rad. I have a 240mm and 120mm rad on the way to create a loop with my CPU and my GTX 480. Here it is in all of its sexyness... Oh, and it weight around 5lbs with the backplate, the HeatKiller block is a beast.

 

[claylomax]

Got my block today and threw it into my crappy loop. Idles around 40c and saw a max of 74c in Skyrim at 99% gpu usage. I know, these temps aren't that impressive but it is in a very small loop with 1/4in ID tubing and a H40 rad. I have a 240mm and 120mm rad on the way to create a loop with my CPU and my GTX 480. Here it is in all of its sexyness... Oh, and it weight around 5lbs with the backplate, the HeatKiller block is a beast.

http://i368.photobucket.com/albums/oo127/traxxasbasher13/IMG_20121015_1615341_zps87e63fb1.jpg

Beautiful!

 

[johnspack]

Now deciding whether to order a 2nd 480 next week. I really want one, but even at stock clocks I'll be pushing my psu. And they won't put the things back on sale, so I have to pay 270can.. after 135 for cable that leaves 75 bucks to live on for a month! Time to sell some cards....

 

[claylomax]

Now deciding whether to order a 2nd 480 next week. I really want one, but even at stock clocks I'll be pushing my psu. And they won't put the things back on sale, so I have to pay 270can.. after 135 for cable that leaves 75 bucks to live on for a month! Time to sell some cards....

Your PSU will hold unless you overvolt your cards; if you want to run benchmarks on two GTX 480's you're going to need a bigger PSU. I've seen my system pulling 1100w off the wall with both cards overvolted, but at that time I had Phenom II cpu's.

 

[johnspack]

Ouch, 1100 watts! Well, my silverstone is supposed to be able to peak at 900, so hard to say. Have to put off the 2nd one for now anyways, need to sell off my 285s first. Kind of wanted to keep them, but I'd rather have a 480!

 

[cdawall]

Ouch, 1100 watts! Well, my silverstone is supposed to be able to peak at 900, so hard to say. Have to put off the 2nd one for now anyways, need to sell off my 285s first. Kind of wanted to keep them, but I'd rather have a 480!

1100W at the wall with 80% efficiency is 880 watt at the powersupply should be fine on any HIGH END 850W unit.

 

[TB13]

Like said above, a quality 850 watt will be more than enough for 2 GTX 480's

 

[Flibolito]

Should be good, but a little headroom is always nice. 1.168v on my GF100 in system #1 is about 600 watts so im almost at the limit of my 12v rail.

But this thing also runs the pump and a ton of fans and such so overall is pretty stretched

 

[johnspack]

Sounds good, my EVGA does stock at 1.025v, so if I get a second one and stay at stock, I'll more than likely be okay.

 

[johnspack]

Anyone, what's a fair asking price for 2 well taken care of EVGA GTX285s? 250can?

 

[johnspack]

Well, still stuck with a single 480, and can't be happier with it! I didn't know about things like 32x csaa before. Still really want a 2nd one, but guess I'll bide my time and wait to snatch one up cheap used..... or just wait for a 670....

 

[cdawall]

Well, still stuck with a single 480, and can't be happier with it! I didn't know about things like 32x csaa before. Still really want a 2nd one, but guess I'll bide my time and wait to snatch one up cheap used..... or just wait for a 670....

My second rig is close to benchmarking...single GTX 470 on water will likely keep clocks lower on this one for power consumption.

 

[cdawall]

Got the HTPC up and running I think this is were I am going to keep it. Should be a good balance between the CPU and GPU for speed in games etc.

 

[claylomax]

1100W at the wall with 80% efficiency is 880 watt at the powersupply should be fine on any HIGH END 850W unit.

Our psu's (johnspack's and mine) are 88% efficient, not 80%.

 

[TB13]

Little update on my watercooling and OC. I added a few more fans today on my rad and got to overclocking, here is what I have so far

Overall I am pretty happy with it, I am thinking about going a little further, but I don't want to stress my little 550w PSU too much

 

[johnspack]

Not sure what results others are getting, but I do notice a performance increase with the 310.33 betas, but for some reason I had to back off 10mhz on my gpu clock. Was running Warhead at 860 like I usually do, and within a minute or 2 driver crash. Backed off to 850 and played for over an hour stable. Noticed something strange too... have Warhead at all enthusiast and 4xaa and I noticed 1460mbs of vid memory used, since when did it use that much?

 

[TB13]

Not sure what results others are getting, but I do notice a performance increase with the 310.33 betas, but for some reason I had to back off 10mhz on my gpu clock. Was running Warhead at 860 like I usually do, and within a minute or 2 driver crash. Backed off to 850 and played for over an hour stable. Noticed something strange too... have Warhead at all enthusiast and 4xaa and I noticed 1460mbs of vid memory used, since when did it use that much?

My OC is still stable with 310.33. In Heaven the Min FPS is quite a bit better, but the max and average are about the same, check it out:

306.97

310.33

 

[cdawall]

310.33 crashes when SLi is enabled on mine. :shadedshu

Good news however is I have 3 GTX 470's and 3 DD-GTX470's waiting on a tri SLi board to get testing. Been looking between the sabertooth 990FX and 990FX-UD5/7.

Good news is my TPQ-850 should be able to at least handle them stock

This guy was running an overclocked i7 965 watercooling cold cathodes etc. I am planning on running a dual PSU setup on this for a bit using my SFX-450w to run the fans, water cooling and one card.

 

[TB13]

310.33 crashes when SLi is enabled on mine. :shadedshu

Good news however is I have 3 GTX 470's and 3 DD-GTX470's waiting on a tri SLi board to get testing. Been looking between the sabertooth 990FX and 990FX-UD5/7.

Good news is my TPQ-850 should be able to at least handle them stock

http://img.techpowerup.org/121107/Capture017526.jpg

This guy was running an overclocked i7 965 watercooling cold cathodes etc. I am planning on running a dual PSU setup on this for a bit using my SFX-450w to run the fans, water cooling and one card.

That sucks... I like the look of the UD7, very minimalistic and sexy. I couldn't tell you which would be better though, it has been a while since I have had an AMD setup.