Your PC ATM

[agent00skid]

Why purple? Is this shoebox going to fulfill some kind of DVR role?

Nope. Didn't want green, and it was cheaper than red.

 

[springs113]

How far I've come from. Looking back I'm very proud of myself lol. Some of my builds over the past few years

 

[Animalpak]

 

[GhostRyder]

Dude that just looks cool!!!

 

[GreiverBlade]

superbe!

 

[Animalpak]

Thank you guys !

Some more !

 

[d1nky]

Thank you guys !

Some more !

those kinks will kill your water flow

 

[Animalpak]

those kinks will kill your water flow

Thank you yeah true i see them.

I do not have much time these days because of the work but tomorrow i will flush out the water then eliminate that kinks.

 

[springs113]

Thank you yeah true i see them.

I do not have much time these days because of the work but tomorrow i will flush out the water then eliminate that kinks.

Are you going to be placing angular adapters at that spot?

 

[RealNeil]

I thought that my 901 build was cool, but yours takes the cake! Excellent job on it.

 

[cadaveca]

View attachment 59660
I thought that my 901 build was cool, but yours takes the cake! Excellent job on it.

I love that case. Both of you have pretty sick builds...

 

[RealNeil]

Thank you, he actually modded his case. I just used what was built into the 901's existing features to do mine. It does have good airflow.

 

[Animalpak]

Are you going to be placing angular adapters at that spot?

No. i will put a longer tubing section to eliminate the kink, i know angular adapters looks more clean and direct but i like to see a little more tubes.

Thank you, he actually modded his case. I just used what was built into the 901's existing features to do mine. It does have good airflow.

View attachment 59660
I thought that my 901 build was cool, but yours takes the cake! Excellent job on it.

Thank you. I already have this case for quite some time.

I cut out the squares where you mount the radiator to just improve the airflow ( you also need to do ).

The only problem you have ( i had too ) is that if you have to disconnect something from the rear I/O you need to remove the back glass panel.

However, I no longer have that problem

My radiator fans are rated 1000 rpm and they don't do the job as i thought.

Im gonna change them with something faster like 1200 to 1800 rpm.

 

[RealNeil]

Thank you. I already have this case for quite some time.

I cut out the squares where you mount the radiator to just improve the airflow ( you also need to do ).

The only problem you have ( i had too ) is that if you have to disconnect something from the rear I/O you need to remove the back glass panel.

However, I no longer have that problem

My radiator fans are rated 1000 rpm and they don't do the job as i thought.

Im gonna change them with something faster like 1200 to 1800 rpm.

I made the backside connections and then put a USB hub on it so I can get to it easily.
The CPU Radiator and fans are mounted to the removable plate and as you know, that comes off and moves out of the way, so it's no problem.
My CPU is a i5-4670K, so the H-50 with the Push/Pull Enermax TB-Silence fans cool it off without problems.
My intake fan is a Cougar Vortex PWM high volume fan. Airflow is good, and all stays cool the way it is.

 

[Animalpak]

I made the backside connections and then put a USB hub on it so I can get to it easily.
The CPU Radiator and fans are mounted to the removable plate and as you know, that comes off and moves out of the way, so it's no problem.
My CPU is a i5-4670K, so the H-50 with the Push/Pull Enermax TB-Silence fans cool it off without problems.
My intake fan is a Cougar Vortex PWM high volume fan. Airflow is good, and all stays cool the way it is.

Cool setup mate ! I like it simple and effective !

I have as intake Enermax Twister pressure PWM fan, the rear is 92mm Noiseblocker PWM.

My VRM heatsink of the motherboard gets really hot while gaming when idle is hot but not like in games. I feel hot air sucked out even if there are just the water blocks inside the case.

EK water blocks made a full cover for my motherboard that cools also the VRM circuit, but i dont want to put away my Heatkiller 3.0 CPU waterblock. That will be a shame.

Dont know what to do with the VRM section because i am worried that the motherboard will not last longer.

 

[RealNeil]

Having the two fans on the rear really helps the airflow when the tempered glass sides are installed. My VRM temps are normal with the positive airflow.

 

[THE_EGG]

After 1 month of going back and forth to my first shop and other shops, many, many hours assembling and disassembling my pc etc - I finally now have a bug/fault free X99 board in my system.

I had to write a law report to the first shop's manager explaining my rights and how they broke federal law in a number of ways. I also included procedural errors that the shop's technicians had done to my pc. Thank god that the ACCC and Australian Consumer Law exist.

Since last time I posted here I've upgraded to these things;
2x Gigabyte GTX 970 G1 Gaming
Asus X99-Deluxe
Phanteks Enthoo Pro (seriously awesome case, especially for the money), bye bye Air 540.

I learnt my lesson of testing things outside of the case (it has taken me 3 motherboards to get a fully working X99 board). My first Gigabyte X99 Gaming 5 had BIOS issues right from the start, my next X99 Deluxe appeared to have already been opened and used, third time lucky and the second X99 Deluxe was brand new and works like a dream.

I placed some noise deadening foam on the back panel and also some smaller pieces around the case. I also had to superglue the front 20cm fan together as 2 struts broke in shipping. I seem to have had some bad luck with computer components over the past few months.

 

[Sir B. Fannybottom]

My payment for building my friend a rig finally got in, my second 7950

Which means I can finally get some eyefinity gaming at decent FPS

 

[khemist]

Got a block installed on my 980.

 

[d1nky]

After 1 month of going back and forth to my first shop and other shops, many, many hours assembling and disassembling my pc etc - I finally now have a bug/fault free X99 board in my system.

I had to write a law report to the first shop's manager explaining my rights and how they broke federal law in a number of ways. I also included procedural errors that the shop's technicians had done to my pc. Thank god that the ACCC and Australian Consumer Law exist.

Since last time I posted here I've upgraded to these things;
2x Gigabyte GTX 970 G1 Gaming
Asus X99-Deluxe
Phanteks Enthoo Pro (seriously awesome case, especially for the money), bye bye Air 540.

I learnt my lesson of testing things outside of the case (it has taken me 3 motherboards to get a fully working X99 board). My first Gigabyte X99 Gaming 5 had BIOS issues right from the start, my next X99 Deluxe appeared to have already been opened and used, third time lucky and the second X99 Deluxe was brand new and works like a dream.

I placed some noise deadening foam on the back panel and also some smaller pieces around the case. I also had to superglue the front 20cm fan together as 2 struts broke in shipping. I seem to have had some bad luck with computer components over the past few months.

PURE SEX.

if i built a pc now and had the funds it would be like this

 

[RealNeil]

Got a block installed on my 980.

Clean looking rig!

 

[TRWOV]

I got a case today:

My AM1 build has a new home

I'm thorn about making some changes:
- Get a Pico PSU to aid with airflow (there's a mesh underside the case but it is for the PSU fan). Also, the PSU has a slight wine and I can see myself getting fed up with it.
- Get a slot loading blu-ray slim drive OR a 2.5" caddy to add another drive

 

[mrwizard200]

GTX backplate + LEDs=

 

[micropage7]

I got a case today:

My AM1 build has a new home

I'm thorn about making some changes:
- Get a Pico PSU to aid with airflow (there's a mesh underside the case but it is for the PSU fan). Also, the PSU has a slight wine and I can see myself getting fed up with it.
- Get a slot loading blu-ray slim drive OR a 2.5" caddy to add another drive

nice, i like small build and from case if you pair with passive cooler it would be rock

 

[ThE_MaD_ShOt]

I have been meaning to post pics of my main rig, saying "it's finally finished, it's where I wanted it to be". Shit the old saying is true. It will never be finished LOL. Always something I see that I want to replace with something else. I'll post a pick once my new gpu get's here.