Unigine Heaven 4.0 Benchmark Scores

[jordan1794]

i cant do the f12 thing, here is what happens View attachment 66118
i do have the HTML file (i dont know how to edit them or whatnot... i just installed this and saw this thread...)
my score this time was 858 though if you do want to add it, and i have the HTML here
View attachment 66119
Intel Pentium G3258 @ 4.5GHZ with an XFX Radeon HD 7950 @ 1050/1500
Score: 858
again, i have NO software knowledge at all unless i spend a lot of time with it or google things for hours, i am a hardware guy and i intend to stay that way (also i am only 16, i dont have time to learn html)

To learn how to edit the HTML file for this would literally take all of 5 minutes.
But, that's not the point
Have you tried pressing the Print Screen button on your keyboard? (Abbreviated Prt Scr on a lot of keyboards)?
Do that at the bench screen then open up paint and press control+V

 

[tttony]

82 degrees?
Might be getting thermal throttled...could try setting a custom fan curve and seeing if it improves the score a tad bit.

You right, it's really hot, it's a reference card, never cleaned since 2011

MSIA it's installed but I've never used, I use ATI Tray Tools to set clocks when I'm not playing 200/150

I will try to setup a curve with MSIA

 

[Gokufighther]

i cant do the f12 thing, here is what happens View attachment 66118
i do have the HTML file (i dont know how to edit them or whatnot... i just installed this and saw this thread...)
my score this time was 858 though if you do want to add it, and i have the HTML here
View attachment 66119
Intel Pentium G3258 @ 4.5GHZ with an XFX Radeon HD 7950 @ 1050/1500
Score: 858
again, i have NO software knowledge at all unless i spend a lot of time with it or google things for hours, i am a hardware guy and i intend to stay that way (also i am only 16, i dont have time to learn html)

O-O-O-OK i found out the problem and i was able to get a TGA file viewer as well to see if i got the screenshot right his time, (also i had to convert it to png... ugh) and YUSS it works! so here is the score and the specs are the same (g3258 @ 4.5 and 7950 at 1050/1500 (also i had to dial that down to 1000/1500 for valley... strange, but this one is 1050/1500))

(ALSO i had to change the file from 1920x1080 to 1280x720, so many annoying details, all b/c 2mb is the limit for these pics.. ugh)

 

[Gokufighther]

You right, it's really hot, it's a reference card, never cleaned since 2011

MSIA it's installed but I've never used, I use ATI Tray Tools to set clocks when I'm not playing 200/150

I will try to setup a curve with MSIA

you should probably clean that bad boy with some compressed air... and maybe replace the thermal compound... it helps and linustechtips has a youtube vid to help with that!

 

[Gokufighther]

To learn how to edit the HTML file for this would literally take all of 5 minutes.
But, that's not the point
Have you tried pressing the Print Screen button on your keyboard? (Abbreviated Prt Scr on a lot of keyboards)?
Do that at the bench screen then open up paint and press control+V

i got it fixed, i said how in my reply to my post

*also you say that editing an html will take 5 mins... lemme overshare here... it took me over an hour and a half just to find the setting in the control panel for win 8.1 to find out how to add things to my windows firewall so i could play a game.... yeah... i am clueless in software*

 

[Cortana]

i got it fixed, i said how in my reply to my post

*also you say that editing an html will take 5 mins... lemme overshare here... it took me over an hour and a half just to find the setting in the control panel for win 8.1 to find out how to add things to my windows firewall so i could play a game.... yeah... i am clueless in software*

lol sorry.. just found that pretty funny..

 

[GreiverBlade]

O-O-O-OK i found out the problem and i was able to get a TGA file viewer as well to see if i got the screenshot right his time, (also i had to convert it to png... ugh) and YUSS it works! so here is the score and the specs are the same (g3258 @ 4.5 and 7950 at 1050/1500 (also i had to dial that down to 1000/1500 for valley... strange, but this one is 1050/1500))

(ALSO i had to change the file from 1920x1080 to 1280x720, so many annoying details, all b/c 2mb is the limit for these pics.. ugh)

well i convert them to jpg and no need to re-size (at last for me) thanks for that result.

Scores not being added atm?

waiting on @FX-GMC but i'm pretty sure he's kinda busy atm ... so be patient .

 

[RejZoR]

My final official score with:
GIGABYTE Radeon HD7950 3GB WindForce 3X (GV-R795WF3-3GD) @ 1200/7000

Score:
1013

 

[hooiberg]

Because I am new to this, I will get back to you. Thanks

And here I am back, with the same run on windows. Still everything on stock speed. I wil try to up it a nudge. Buying a Lightning and let it run on stock speed is like buying a Lamborghini to do the groceries.
On the other hand, in the top post: "The goal is to provide a chart that represents real world usage". Squeezing every last clock cycle out of the the hardware and punish it to within an inch of its life is not really real world usage. Although opinions may vary...

For completeness: MSI R9 290X Lightning, on stock speed: 1080/1250, on a stock speed core i7 920 (2.67 GHz) running Windows 7, with 24 GB memory

I failed to get Heaven to make a screenshot, so I took a picture of the monitor. Take it or leave it.

 

[FanBanderes]

i7-4770 @ 3.4GHz
8 Gb DDR3 @ 1600Mhz
Sapphire R9 290 @ 1120/5600
driver 15.6 Beta
Windows 8.1 Pro

why to disperse more than 1200? r9 290

 

[Jborg]

 

[RandomSadness]

 

[RejZoR]

If I won't be able to pump out 2000 points with GTX 980 I'll be greatly disappointed and will be fiddling with it for so long that I'll reach that XD

 

[jordan1794]

If I won't be able to pump out 2000 points with GTX 980 I'll be greatly disappointed and will be fiddling with it for so long that I'll reach that XD

It's not super easy. As always, it depends on your specific card. I could just BARELY eek out 2000 without a BIOS mod, kept hitting the power limit.
After BIOS mod for power limit only (No voltage changes) I was able to hit 2040.
I imagine that, if I used a voltage change I'd have the top 980.
I'd probably also have the top score(for 980) if I accepted artifacts, but personally I won't submit a score that has them.

I do know that my vram will run artifact free at 8.450 GHz, and it will RUN (fireworks everywhere) upwards of 8.7 GHz.
If you ignore artifacts you could probably hit 2000 without a BIOS mod.

 

[GreiverBlade]

980 Poseidon Platinum (on a 240X60 with 2 SP120L @1800rpm) i5-4690K @4499(4.5)

 

[RejZoR]

Air or water cooled? Poseidon is a hybrid cooling card...

 

[GreiverBlade]

Air or water cooled? Poseidon is a hybrid cooling card...

the 240X60 is the answer you seek: it's a Phobya G-Changer 240V2 with a DC12-220 pump and a Balancer 150 res (the fan runs too even on water i like to keep them for the additional )

 

[FX-GMC]

Update.

 

[mark-benney]

Ordering new PSU as can not overclock high due to power restriction. But next week am coming back with a 3k test just maybe

 

[ChevyOwner]

This is what my PC got. I don't care about the list, but if I get ever get an answer to my question back on page 23 I will add a screen shot.

I failed to notice that the 1920X1080 fullscreen, and the extreme preset does not use those. To be a bit more consistent with the rest I corrected that error.

Spoiler

Unigine Heaven Benchmark 4.0
FPS:
60.8
Score:
1531
Min FPS:
27.0
Max FPS:
135.9
System
Platform:
Windows 7 (build 7601, Service Pack 1) 64bit
CPU model:
Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz (3410MHz) x6
GPU model:
NVIDIA GeForce GTX 660 10.18.13.5330 (2048MB) x2
Settings
Render:
Direct3D11
Mode:
1600x900 8xAA windowed
Preset
Extreme

Unigine Heaven Benchmark 4.0
FPS:
48.0
Score:
1209
Min FPS:
21.1
Max FPS:
113.3
System
Platform:
Windows 7 (build 7601, Service Pack 1) 64bit
CPU model:
Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz (3410MHz) x6
GPU model:
NVIDIA GeForce GTX 660 10.18.13.5330 (2048MB) x2
Settings
Render:
Direct3D11
Mode:
1920x1080 8xAA fullscreen
Preset
Custom
Quality
Ultra
Tessellation:
Extreme

 

[GreiverBlade]

View attachment 66210

Ordering new PSU as can not overclock high due to power restriction. But next week am coming back with a 3k test just maybe

not valid follow the procedure under in my 2 own quotes

as said many times in the thread and also stated in the rules in the original post: if it's not a screenshot from within the benchmark : not valide (reason behind, it's awfully easy to modify a HTML file, ofc not saying that you do it, but it's a rule.)

7.) Must Be a Screenshot from within Heaven to be valid (See bottom of post) Here's why.
View attachment 65739

F12 at the result in the bench then C:user/your name/Heaven/Screenshot convert the TGA to a JPG and upload

to that point

This is what my PC got. I don't care about the list, but if I get ever get an answer to my question back on page 23 I will add a screen shot.

Does this include fore enabling pcie gen 3?
http://nvidia.custhelp.com/app/answers/detail/a_id/3135/

well ... if it's the question you mean ... no ... if your card is gen3 capable and the motherboard can use it ... why not (i don't see the problem tho ... but maybe @FX-GMC has a different oppinion)

 

[FX-GMC]

This is what my PC got. I don't care about the list, but if I get ever get an answer to my question back on page 23 I will add a screen shot.

Intel i7-4930K @ 3.6GHz | GTX 660x2 1046/1502

I failed to notice that the 1920X1080 fullscreen, and the extreme preset does not use those. To be a bit more consistent with the rest I corrected that error.

Spoiler

Unigine Heaven Benchmark 4.0
FPS:
60.8
Score:
1531
Min FPS:
27.0
Max FPS:
135.9
System
Platform:
Windows 7 (build 7601, Service Pack 1) 64bit
CPU model:
Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz (3410MHz) x6
GPU model:
NVIDIA GeForce GTX 660 10.18.13.5330 (2048MB) x2
Settings
Render:
Direct3D11
Mode:
1600x900 8xAA windowed
Preset
Extreme

Unigine Heaven Benchmark 4.0
FPS:
48.0
Score:
1209
Min FPS:
21.1
Max FPS:
113.3
System
Platform:
Windows 7 (build 7601, Service Pack 1) 64bit
CPU model:
Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz (3410MHz) x6
GPU model:
NVIDIA GeForce GTX 660 10.18.13.5330 (2048MB) x2
Settings
Render:
Direct3D11
Mode:
1920x1080 8xAA fullscreen
Preset
Custom
Quality
Ultra
Tessellation:
Extreme

There is no restriction on PCI-E 2.0 vs 3.0.

 

[ChevyOwner]

Thanks for the answer. I just wanted to make sure as it did need the tool to activate it.
It seems to me it basically just makes games run smoother, but the overall FPS is the same.

Intel i7-4930K @ 3.4GHz | GTX 660x2 1046/1502
CPU is at the stock clocks in case I have them wrong. Turbo is still on.

 

[tttony]

I'm the only one with a AMD 6950

 

[GreiverBlade]

I'm the only one with a AMD 6950

here maybe ... but fret not, one of my friend is running a CFX of them in his build, and he loves them, they still run pretty much anythings he play (even ARK:Survival Evolved), he just happen to be not on that forum ... (he has some problem with English )