Unlocked Realtek HD Audio Drivers Windows 7 & 8 (With Dolby Digital Live and DTS Interactive)

[Hristov RH-Records]

I've already tried. It did not help. I think this is due to the fact that I have to install your mod via device manager and not via setup.exe. But when I use setup.exe, I receive the error "-0001" (when I get an message about creating InstallShield). I do not know if the installation of .exe will change anything but it is the only thing that comes to mind.

Thank you very much. It's actually incredible that you spend so much time helping me.

just I dont know why you receive this error -0001 not only you receive this error many thanks to you because you help me with your screenshots to fix dolby digital output via spdif because I dont have spdif to test I just tried to push an other parameters for dolby digital output and finaly its done now windows 10 creators update can make me an café to drink because finally I just bringed back dolby digital output thank you man So I just upload an archive with the same driver that the setup launch error -0001 maybe is fixed

 

[edumariano]

just I dont know why you receive this error -0001 not only you receive this error many thanks to you because you help me with your screenshots to fix dolby digital output via spdif because I dont have spdif to test I just tried to push an other parameters for dolby digital output and finaly its done now windows 10 creators update can make me an café to drink because finally I just bringed back dolby digital output thank you man So I just upload an archive with the same driver that the setup launch error -0001 maybe is fixed

I was getting this error too.
It`s because the Vendor was not found on the .inf file. In my case (Asus Maximus Ranger with SupremeFX (HDAUDIO\FUNC_01&VEN_10DE&DEV_0071&SUBSYS_38420972). I add this entry to .inf and the setup concluded sucessfully.

 

[Hristov RH-Records]

I was getting this error too.
It`s because the Vendor was not found on the .inf file. In my case (Asus Maximus Ranger with SupremeFX (HDAUDIO\FUNC_01&VEN_10DE&DEV_0071&SUBSYS_38420972). I add this entry to .inf and the setup concluded sucessfully.

ok but go in my tread please its specially for this https://www.techpowerup.com/forums/...audio-driver-mod-for-windows-10.232921/page-2 Now its done just download it from my link and rename it to HDXRT4 please when you are finished send me screenshots in my tread thank you very much for your participation you will have also and supremefx that's great combination So its working for you all plugins and Dolby out also

 

[Jimmy9303]

Hello everybody!
Can someone make an SRS, DTS (UltraPC Surrround Sensation/Connect/Interactive), Sonic Focus (not SF3) and Dolby mod making?
Would really appreciate it.
thanx in advance

 

[Hristov RH-Records]

Hello everybody!
Can someone make an SRS, DTS (UltraPC Surrround Sensation/Connect/Interactive), Sonic Focus (not SF3) and Dolby mod making?
Would really appreciate it.
thanx in advance

Sorry man its impossible to push dts effects to work because of so much things to deal with.
1. I cant push dtsaudioservice64.exe that's the first important thing it get error - Error 1053: "The service did not respond in a timely fashion" when attempting to start, stop or pause a service. I think because its very old for windows 10.
2. sonic focus is the same there are two sonic focus one is by analog devices and second is by Virage Logic (its impossible to render LFX) I think to old for windows 10 also
3. my mod is full dolby mod just tell me your device ID and I will add this to the inf you will get srs dolby audio x2 dolby home theatre v4 dolby digital plus and Harman also dolby digital output via SPDIF.
4. For dts is possible but very difficult for now is to push DTS Studio Sound (also an effect for 5.1 configuration not the same like SRS)
5. in fact If i can start dtsaudioservice64.exe or dtsu2p service I will push dts surround sensation with dts connect interactive in my next build of the driver Thank you

 

[Jimmy9303]

Thanx for your answer

It's a bit odd for Microsoft that dtsaudioservice64.exe makes an error for win 10
idk when or what they can fix it

It's interesting that Sonic Focus is twice things there, I don't know that. thx for the info

I will tell my device ID after I buy this week an S/PDIF HDMI laptop (I have another one, but it's sadly that is in win 7).
I think they will make the same error (-0001) in win 10, but we will see.

But I have a question: Is DTS Studio Sound fully working in your mod?

I tried 1-2 programs with normal Realtek audio driver+ DTS Studio Sound (from station-drivers.com), but none of them reacted in my clicks and doesn't working either. It's just like freezing up the PC

You're welcome for your next making mod, hopefully it will better, as this that you maked for win 10.

P.S: Please send me a PM how to making a mod, i've tried in HKEY_CLASSES_ROOT or in the .inf's or whatever, but no luck.
And how much time you costs making this?

Thanx again!

 

[Jgr9]

The simpler Dolby/DTS mod (on pg 37) for Realtek Optical is working again in Insider builds.

 

[Hristov RH-Records]

Thanx for your answer

It's a bit odd for Microsoft that dtsaudioservice64.exe makes an error for win 10
idk when or what they can fix it

It's interesting that Sonic Focus is twice things there, I don't know that. thx for the info

I will tell my device ID after I buy this week an S/PDIF HDMI laptop (I have another one, but it's sadly that is in win 7).
I think they will make the same error (-0001) in win 10, but we will see.

But I have a question: Is DTS Studio Sound fully working in your mod?

I tried 1-2 programs with normal Realtek audio driver+ DTS Studio Sound (from station-drivers.com), but none of them reacted in my clicks and doesn't working either. It's just like freezing up the PC

You're welcome for your next making mod, hopefully it will better, as this that you maked for win 10.

P.S: Please send me a PM how to making a mod, i've tried in HKEY_CLASSES_ROOT or in the .inf's or whatever, but no luck.
And how much time you costs making this?

Thanx again!

its just because I must to add your device ID into the inf. I hope that if I add your device you will never get this error. For DTS Studio Sound in the moment is an project I hope that it will work in the next build I hope soon

 

[Jimmy9303]

its just because I must to add your device ID into the inf. I hope that if I add your device you will never get this error

okay, maybe in Saturday or Sunday

 

[Hristov RH-Records]

okay, maybe in Saturday or Sunday

All DTS effects are little bit more complicated.
Very soon I will make an different packages of my driver mod one for Lenovo one Toshiba one for all others

 

[Jimmy9303]

All DTS effects are little bit more complicated.
Very soon I will make an different packages of my driver mod one for Lenovo one Toshiba one for all others

Can you make also for Asus and or for Acer?

 

[Hristov RH-Records]

Can you make also for Asus and or for Acer?

yes I will try to add all existing chips tomorrow when I wake up I will start to make this think

 

[Jimmy9303]

And for an example see Gamespirit's mod, that was really cool, they had SRS, Sonic Focus, Dolby and DTS (UltraPC, Symmetry, Boost and Connect)

 

[Hristov RH-Records]

And for an example see Gamespirit's mod, that was really cool, they had SRS, Sonic Focus, Dolby and DTS (UltraPC, Symmetry, Boost and Connect)

yes but gamespirit mod is windows 7 based not windows 10 and it never have dolby digital output via SPDIF, also in windows 10 you not have sound enchancements tab like effects tab and room correction also enchancements tab are disabled by default so I think that is bad idea to install this mod in windows 10. Also you can see in gamespirit mod that you cannot switch the frequency and speaker chanel configuration only stereo 24bit 48000hz is possible

 

[Jimmy9303]

aye, good point
I had installed an my old emachines laptop in win 10 (does not have S/PDIF either HDMI) and they worked a bit, and also like a mod a-la Gamespirit (that was by cmhdream) and only SRS worked.

 

[Hristov RH-Records]

aye, good point
I had installed an my old emachines laptop in win 10 (does not have S/PDIF either HDMI) and they worked a bit, and also like a mod a-la Gamespirit (that was by cmhdream) and only SRS worked.

My mod is just for bring dolby digital output via spdif in windows 10 all other effects like srs dolby audio x2 Harman dolby digital plus also that I have pushed are luxury things here in the last screenshot you can see https://www.techpowerup.com/forums/...audio-driver-mod-for-windows-10.232921/page-2

 

[Jimmy9303]

Yeah, that's many Dolby's out there

I have a Logitech Z-906 and hopefully that will decodes your mod, I will tell in the next 3-4 days

 

[Daytrader]

My mod is just for bring dolby digital output via spdif in windows 10 all other effects like srs dolby audio x2 Harman dolby digital plus also that I have pushed are luxury things here in the last screenshot you can see https://www.techpowerup.com/forums/...audio-driver-mod-for-windows-10.232921/page-2

So your spidf/optical mod, works on the windows creators update that is not working for anyone ?

 

[Hristov RH-Records]

Yeah, that's many Dolby's out there

I have a Logitech Z-906 and hopefully that will decodes your mod, I will tell in the next 3-4 days

super my friend you can also post an screenshots when you installed the driver mod

 

[Hristov RH-Records]

So your spidf/optical mod, works on the windows creators update that is not working for anyone ?

just tell me your device id I will put it into the inf file and when you installed the driver you can also post your screenshots that's what I want just screenshots if you have windows creators update

 

[Hristov RH-Records]

@edumariano is this driver working for you?

 

[erpguy53]

My unit is Lenovo Y50-70. Windows 10 Pro 1607
I wanted to go back to stock Lenovo drivers (they are Dolby Live 5.1 with dolby digital plus), but now it doesn't install Dolby. It's like it installs Dolby Plugin, I can choose Dolby Digital Live for S/PDIF, and enable Dolby Digital Plus in options but there is no Dolby Digital Apllication. In drivers folder I found folder "PCEE4" with DolbyAdvancedAudio (never used it), DolbyHomeTheater (Cant install, getting error saing DHT can'y be install) and folder "DS1" with DolbyDigitalPlusAA and DolbyDigitalPlusHT. I install DolbyDigitalPlusHT but cant get it run on internal speakers / headphones (it not responds to the signal, in application equalizer doesn't move if you know what I mean, It worked before I started to mess around with drivers) with S/PDIF iw works OK.

Whole point of messing with drivers was to get DTS NEO, I do't like Dolby Pro Logic II which I get with stock drivers.
Full install process of your mod, no dlls added.
1. Unistalled realtek drivers and all plugins, rebooted, run ccleaner registry clean to tidy up
2. CMD Commands and boot with DISABLE DRIVER SIGNATURE ENFORCEMENT (ain't able to install dolby without doin dis)
3. DTPC, choose DTH Rel.
4. Reboot
5. Device manager > sound video game controllers > Updating "Dolby Home Theater v4 - Realtek HD Audio", Reboot
6. On startup Error about incorrect version of dolby audio "Current version of dolby audio is 7.2.8000.17 applications needs version 7.2.7.000.4. Please reinstall"
7. Installing other plugins: DolbyDgitalPlusHT.msi,dax2_api_release_x64.msi, UpdateDax2Db, dax2_app_release_x64.msi, SRSUIAPO, Audio By Harman
8. While installing SRSUIAPO error: "This model is not supported. SRS Audio enhancement may not operate correctly for this device. The default settings will be installed."
9. Reboot and still getting error.
10. No SRS or any other plugins in Realtek Application
11. All dolby plugins work. Effect is great but no 5.1 output.

Screenshots:
View attachment 87391 View attachment 87392 View attachment 87393 View attachment 87394

Inspect this registry key in RegEdit:
HKEY_LOCAL_MACHINE\SOFTWARE\Dolby\PCEE4\StaticKeys
It should have {8A92D74F-1332-43f6-AB72-01C0E37F1CF0},0 with a DWORD value of 3ff in hex (1023 in dec.) for Dolby Home Theater V4 or 21f in hex (543 in dec.) for Dolby Advanced Audio V2
I know when I installed gamespirit's modded realtek drivers, the INF file inputs the value to 3FF but the driver hardcode changes it to 21F afterwards so I had to edit the Registry afterwards to make the proper change.

If I wanted to enable or force usage of Dolby Digital Plus (DS1) - I think of it as "Dolby V5", I'd go to this registry key in RegEdit:
HKEY_LOCAL_MACHINE\SOFTWARE\Dolby\DolbyDigitalPlus\StaticKeys
I also add the {8A92D74F-1332-43f6-AB72-01C0E37F1CF0},0 variable with a DWORD value of 3ff in hex for Dolby Digital Plus Home Theater; 21f in hex for Dolby Digital Plus Advanced Audio.

2. sonic focus is the same there are two sonic focus one is by analog devices and second is by Virage Logic (its impossible to render LFX) I think to old for windows 10 also

forget about sonic focus. the company & its successors that made sonic focus and sonic studio have gone out of business several years ago. plus VERY FEW realtek chips actually support it. The ASUS K43SJ laptop was the only one I know that used an old realtek audio chipset with sonic focus. the sonic stuff got replaced by Waves MaxxAudio, which was far better than sonic.

 

[jamam]

@Dj Urko can i use yor modified driver for my desktop pc DELL Optiplex 5040 with wave maxxaudio (
HDAUDIO\FUNC_01&VEN_10EC&DEV_0255&SUBSYS_102806BA&REV_1000 )

 

[Hristov RH-Records]

@Dj Urko can i use yor modified driver for my desktop pc DELL Optiplex 5040 with wave maxxaudio (
HDAUDIO\FUNC_01&VEN_10EC&DEV_0255&SUBSYS_102806BA&REV_1000 )

yes I will add this into the inf file wait and can you post your screenshots here https://www.techpowerup.com/forums/...ek-hd-audio-driver-mod-for-windows-10.232921/ Thank you. Now just download your inf file that I have uploaded in my link for you rename it to HDXRT4 only and replace this in folder Win64 then install the Driver mod

 

[itachimendes]

@djurko yu have Dolby atmos "api" ??

I want this dolby