Ryzen Owners Zen Garden

[zo0lykas]

Hello guys

maybe you can help me?!
i cant OC my rams over 2400 :-/ i tried everything or maybe i done something wrong way :/
tried play with timing,voltage, tried use xmp profiles, still 2400 :/ my rams listen on motherboard list.

motherboard - AX370 Gaming K7 v1
cpu - ryzen 1800x
rams - kingston hyperx predator HX432c16PB3k2/16

any advice?

 

[xorbe]

Did you install into the prefered slots? Did you set 1.35V? Do you have latest bios with agesa 1.0.0.6b?

 

[zo0lykas]

No i still keep them in the box.
Sure i did, and if you read i told i tried everything, voltage,timing,manually play with it, after tried xmp profiles, sure bios last, but before released last version with previous bios was the same. Not going higher than 2400

 

[TheLostSwede]

Multiple UEFI updates later and AGESA 1.0.0.6b and still no luck with 3200MHz on my RAM
I don't understand why, as others have made it work. 3066MHz is rock solid, 3200MHz boots, but it makes the system really flaky and causes blue screens...

 

[the54thvoid]

Multiple UEFI updates later and AGESA 1.0.0.6b and still no luck with 3200MHz on my RAM
I don't understand why, as others have made it work. 3066MHz is rock solid, 3200MHz boots, but it makes the system really flaky and causes blue screens...

If it's not QVL memory, nothing is guaranteed but it also seems with Ryzen, nothing is guaranteed. My GSkill wouldnt hack it at optimum profiles so i needed to use a different DOCP setting, in other words, my Bclk is 104 I think, not 100. Have you got the option to experiment with different base clock settings o the motherboard?

 

[PHaS3]

I may be a little late to this party, but I'd like to sub / share.

I got my hands on a Ryzen 7 1700 to replace my i5 3570K (was at 4.6GHz), 16GB Corsair LPX DDR4 2400 (I have it stable at 2667 for now), MSI Gaming Plus X370. I'm using the stock Spire cooler until my retention bracket for my H105 arrives.

Absolutely loving this CPU and platform, everything is definitely smoother than before, even though I technically run less RAM (used to have 24GB now 16). I tested a small OC to 3.8GHz, ran flawlessly and didn't pass 79°C on this stock cooler Retreated back to stock for now, at least until I can use the 105 again, but honestly I don't see the need to OC yet...

 

[TheLostSwede]

If it's not QVL memory, nothing is guaranteed but it also seems with Ryzen, nothing is guaranteed. My GSkill wouldnt hack it at optimum profiles so i needed to use a different DOCP setting, in other words, my Bclk is 104 I think, not 100. Have you got the option to experiment with different base clock settings o the motherboard?

It's on the list, but not at the rated speed... And no, no option to change base speeds. Asus also run their boards at sub 100MHz bus speed...

 

[HTC]

I may be a little late to this party, but I'd like to sub / share.

I got my hands on a Ryzen 7 1700 to replace my i5 3570K (was at 4.6GHz), 16GB Corsair LPX DDR4 2400 (I have it stable at 2667 for now), MSI Gaming Plus X370. I'm using the stock Spire cooler until my retention bracket for my H105 arrives.

Absolutely loving this CPU and platform, everything is definitely smoother than before, even though I technically run less RAM (used to have 24GB now 16). I tested a small OC to 3.8GHz, ran flawlessly and didn't pass 79°C on this stock cooler Retreated back to stock for now, at least until I can use the 105 again, but honestly I don't see the need to OC yet...

Assuming you used the stock paste that came with the cooler, be careful when removing the stock cooler so you avoid what happened to me when i tried to swap it.

 

[PHaS3]

Assuming you used the stock paste that came with the cooler, be careful when removing the stock cooler so you avoid what happened to me when i tried to swap it.

I think this happened with every AMD CPU I have ever had (except my 2500+ Barton lol). Thanks for the heads up though I remember the first time I saw it I also was a little concerned but its a thing :/

 

[HTC]

I think this happened with every AMD CPU I have ever had (except my 2500+ Barton lol). Thanks for the heads up though I remember the first time I saw it I also was a little concerned but its a thing :/

In my case, it was the 1st time i had the cooler that stuck to the CPU once the fixating part was removed.

Scared the crap out of me when i noticed the CPU had been yanked from the board, because i thought i had just screwed my new AM4 system.

 

[PHaS3]

Scared the crap out of me when i noticed the CPU had been yanked from the board, because i thought i had just screwed my new AM4 system.

Pulling game must be strong lol In all seriousness, it is a bit scary and dodgy when it happens the first time.

 

[xorbe]

It's very hard to remove the stock cooler without taking the cpu with it, even with the chip warmed up. I can't twist the hsf because the pins are still in the holes despite fully unscrewed. I have never had this challenge before with any other system!

 

[zo0lykas]

maybe enough spam out of topic ?

better give some advice how oc rams

 

[xorbe]

maybe enough spam out of topic ?

I checked the last couple pages, everything seems Ryzen related (troubleshooting and guidance, per OP's first post).

 

[PHaS3]

Hello guys

maybe you can help me?!
i cant OC my rams over 2400 :-/ i tried everything or maybe i done something wrong way :/
tried play with timing,voltage, tried use xmp profiles, still 2400 :/ my rams listen on motherboard list.

motherboard - AX370 Gaming K7 v1
cpu - ryzen 1800x
rams - kingston hyperx predator HX432c16PB3k2/16

any advice?

Did you install into the prefered slots? Did you set 1.35V? Do you have latest bios with agesa 1.0.0.6b?

No i still keep them in the box.
Sure i did, and if you read i told i tried everything, voltage,timing,manually play with it, after tried xmp profiles, sure bios last, but before released last version with previous bios was the same. Not going higher than 2400

maybe enough spam out of topic ?

better give some advice how oc rams

You're not taking advice too well, hence people seemed to move on with life rather than deal with "No I still keep them in the box" type sarcastic comments.

If you're on the latest bios for your board, and have "tried everything", then it may be just really terrible luck. The modules appear to not be dual rank, and the XMP profiles should be fine. I assume you tried both Profile 1 and 2? As in if 3200 didn't work, perhaps 3000 would? Have you tried manually setting say 2667 with appropriate timings of similar RAM modules at that speed?

 

[HUSKIE]

AM4+ is coming..... Very soon

 

[zo0lykas]

Hi

honestly I never tried go lower than 3200

just now back from work, and tried

2666 working well 16-18-18-36 // 1.35
2800 working well 16-18-18-36 // 1.35
2933 working well 16-18-18-36 // 1.35

when I oc to 3066, I already knew that not gonna start, because when I safe and exit in bios, always windows load straight up, but this time is start and reboot 3 times quick reboot, don't know how explain, start pc and after 1-2sec shutdown, and repeat it 3 times. when load windows, and I can see 2400 :/
same happens with 3200.

so for now I stable with 2933

Thanks for advice go lower
any more advice ?

apologise for my english

You're not taking advice too well, hence people seemed to move on with life rather than deal with "No I still keep them in the box" type sarcastic comments.

If you're on the latest bios for your board, and have "tried everything", then it may be just really terrible luck. The modules appear to not be dual rank, and the XMP profiles should be fine. I assume you tried both Profile 1 and 2? As in if 3200 didn't work, perhaps 3000 would? Have you tried manually setting say 2667 with appropriate timings of similar RAM modules at that speed?

 

[PHaS3]

Hi

honestly I never tried go lower than 3200

just now back from work, and tried

2666 working well 16-18-18-36 // 1.35
2800 working well 16-18-18-36 // 1.35
2933 working well 16-18-18-36 // 1.35

when I oc to 3066, I already knew that not gonna start, because when I safe and exit in bios, always windows load straight up, but this time is start and reboot 3 times quick reboot, don't know how explain, start pc and after 1-2sec shutdown, and repeat it 3 times. when load windows, and I can see 2400 :/
same happens with 3200.

so for now I stable with 2933

Thanks for advice go lower
any more advice ?

apologise for my english

Good stuff, glad its working at 2933... better than 2400, hey

I think you're probably sorted, your ram should handle 2933 no problem since its lower than its XMP stock. Hope you enjoy your Ryzen more now too

Happy to have helped a bit.

 

[Durvelle27]

Any 1600 or 1600X users

Thinking of downgrading to one

 

[PHaS3]

Any 1600 or 1600X users

Thinking of downgrading to one

Any particular reason why? Gaming performance? I have a 1700 and I wouldn’t want to do that. Love me my 1700. I don’t have any performance issues in any games as it is.

 

[Durvelle27]

Any particular reason why? Gaming performance? I have a 1700 and I wouldn’t want to do that. Love me my 1700. I don’t have any performance issues in any games as it is.

Funds and some other things

So need to make some downgrades

 

[PHaS3]

Funds and some other things

So need to make some downgrades

Cool, didn’t mean to pry, was wondering if you’d found something you don’t like about the 1700

I’ve seen a lot of positive results from the 1600 and 1600X in gaming etc.

 

[Durvelle27]

Cool, didn’t mean to pry, was wondering if you’d found something you don’t like about the 1700

I’ve seen a lot of positive results from the 1600 and 1600X in gaming etc.

nahhh i loved it

Just need to downgrade

wondering if the 1600 would hold back dual Vega 64s

 

[R-T-B]

AM4+ is coming..... Very soon

Says who?

 

[PHaS3]

wondering if the 1600 would hold back dual Vega 64s

I think dual Vega 64s would hold back dual Vega 64s lol. I want a 56 or 64 so bad (need to replace GTX970). I think a 1600 (and X) will be fine with it. Arguably more compute power than a 7700K via thread count on multi-threaded apps, "fast enough" single threaded... I don't think there'd be a problem.