The Ultimate Realtek HD Audio Driver Mod for Windows 10

[night_mare007]

Hi all,
Thanks for this wonderful thread !

I hope you ppl can please help me
I've got ACL668 chip on my Asus G751JT laptop.
I wish to achieve 5.1 on digital SPDIF + SBlaster 720....
i'm close - but have issue with SB 720 stuck on "stereo", instead of "5.1" - even though 5.1 is the selected "format" on windows's playback devices.

1st, i'd installed realtek 6.0.1.8363 from post #784 & SoundBlaster 720 v3.2.24.0 app.
then, after installation finished, I couldn't get 5.1 "format" for my digital output. ( I get error format not supported ).

So I used FX CONFIGURATOR to change "Endpoint FX APO" to a value I reserved from another driver ( old version ) that had its 5.1 format working for the digital output.
after applying changes in FX CONFIGURATOR, I managed to get 5.1 format for my digital output ANDSB 720 is processing output successfully ,
i.e I can hear it effects what I hear...
BUT - under SB 720 SETUP screen - I keep seeing "Stereo" under speaker configuration - EVEN THOUGH I'M ALREADY USE 5.1 FORMAT.
I want to have 5.1 in SB720 inorder to be able to calibrate the speaker distances - but I can'y because it's only detecting stereo !

any idea how can I make SB720 detect that I use 5.1 format ?

UPDATE: The issue happens also when I CLEANED install driver from post #845 - Even when I use patched RLTKAPO64.DLL from OLD 6.0.1.60xx - I get error when I pick 5.1 format for my digital SPDIF ( MY CARD IS ALC668 - IT SHOULD BE SUPPORTED !!! )
once again, when I change the "Endpoint FX APO" - the 5.1 format works - but NOT able to change speaker configuration in SB720 :-(

Spoiler: My FX CONFIGURATOR CONFIG

[SFX]
{F841F354-41AB-4652-81EF-F879AE87F9FC}
[LFX]
[MFX]
{0803F79D-A6CB-42F1-A46C-A1B0F067FEFC}
[GFX]
[EFX]
{A29EB043-6CE2-4ee2-B38C-F58719E0D88F}
[OSFX]
[OMFX]
[UI]
{74C7569D-ED69-4292-9886-CC89DD455744}
[CompositeSFX]
[CompositeMFX]
[CompositeEFX]
[CompositeOSFX]
[CompositeOMFX]
[ProcessingSFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingLFX]
[ProcessingMFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingGFX]
[ProcessingEFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingOSFX]
[ProcessingOMFX]
[Notes]

Spoiler: Image

 

[alanfox2000]

Hi all,
Thanks for this wonderful thread !

I hope you ppl can please help me
I've got ACL668 chip on my Asus G751JT laptop.
I wish to achieve 5.1 on digital SPDIF + SBlaster 720....
i'm close - but have issue with SB 720 stuck on "stereo", instead of "5.1" - even though 5.1 is the selected "format" on windows's playback devices.

1st, i'd installed realtek 6.0.1.8363 from post #784 & SoundBlaster 720 v3.2.24.0 app.
then, after installation finished, I couldn't get 5.1 "format" for my digital output. ( I get error format not supported ).

So I used FX CONFIGURATOR to change "Endpoint FX APO" to a value I reserved from another driver ( old version ) that had its 5.1 format working for the digital output.
after applying changes in FX CONFIGURATOR, I managed to get 5.1 format for my digital output ANDSB 720 is processing output successfully ,
i.e I can hear it effects what I hear...
BUT - under SB 720 SETUP screen - I keep seeing "Stereo" under speaker configuration - EVEN THOUGH I'M ALREADY USE 5.1 FORMAT.
I want to have 5.1 in SB720 inorder to be able to calibrate the speaker distances - but I can'y because it's only detecting stereo !

any idea how can I make SB720 detect that I use 5.1 format ?

UPDATE: The issue happens also when I CLEANED install driver from post #845 - Even when I use patched RLTKAPO64.DLL from OLD 6.0.1.60xx - I get error when I pick 5.1 format for my digital SPDIF ( MY CARD IS ALC668 - IT SHOULD BE SUPPORTED !!! )
once again, when I change the "Endpoint FX APO" - the 5.1 format works - but NOT able to change speaker configuration in SB720 :-(

Spoiler: My FX CONFIGURATOR CONFIG

[SFX]
{F841F354-41AB-4652-81EF-F879AE87F9FC}
[LFX]
[MFX]
{0803F79D-A6CB-42F1-A46C-A1B0F067FEFC}
[GFX]
[EFX]
{A29EB043-6CE2-4ee2-B38C-F58719E0D88F}
[OSFX]
[OMFX]
[UI]
{74C7569D-ED69-4292-9886-CC89DD455744}
[CompositeSFX]
[CompositeMFX]
[CompositeEFX]
[CompositeOSFX]
[CompositeOMFX]
[ProcessingSFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingLFX]
[ProcessingMFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingGFX]
[ProcessingEFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingOSFX]
[ProcessingOMFX]
[Notes]

Spoiler: Image

View attachment 100941

Restore Default Realtek Config on SPDIF and Speakers
Follow the guide here
http://puresoftapps.blogspot.com/2018/03/virtual-audio-cable-apo-user-guide.html
Use Virtual Audio Cable (VAC) by Eugene V. Muzychenko
Open Virtual Audio Cable Control Panel and set NC - 1...8, tick Volume Control and Enable Spk Pin
Open sound property, select capture tab, double click VAC (e.g. Line 1). Tick the checkbox "Listen to this device" and select SPDIF.
On Advanced tab(playback devices and capture devices), select the channel you want.
Load Sound Blaster X720 Config on VAC endpoint
On Realtek SPDIF Advanced tab, select DTS Interactive or Dolby Digital Live





DTS APO 1.0
DTS Surround Sensation Speaker = DTS Surround Sensation UltraPC
DTS Surround Sensation Headphone = DTS Surround Sensation UltraPC
DTS Bass Enhancement
DTS Symmetry
DTS Boost
DTS Voice Clarification
DTS Connect (Neo : PC)

DTS APO 2.0
DTS UltraPC II
DTS UltraPC II Plus

DTS APO 3.0
App: DTS Audio ( DTS Listen = DTS Studio Sound + DTS Headphone:X )
DTS Studio Sound
DTS Headphone:X

 

[jihoon83]

Hi Alanfox2000.
I use Modded Realtek High Definition Audio version 6.0.1.8403 x64 of you, driver working dolby atmos Sound systems UWP stable, but speaker 5.1 not work.
But you update driver Modded Realtek High Definition Audio version 6.0.1.8409 x64, not working driver, setup complete when play game sound it broken, bug soundfire cannot execute, it same as compressed, What happen ?
You can mod driver help me ? i need Dolby Atmos, not dts, sound blaster. just only driver realtek use driver dolby atmos.
My harware id:
HDAUDIO\FUNC_01&VEN_10EC&DEV_0899&SUBSYS_1458A002&REV_1000
HDAUDIO\FUNC_01&VEN_10EC&DEV_0899&SUBSYS_1458A002
Thanks

 

[Jimmy9303]

Where i can find these apps?
The download link is at puresoftapps.com not present at the moment and in the older MediaFire link it has not included
Can someone uploading these files?

1. audio by HARMAN
2. Dolby Audio (Desktop)
3. Dolby Digita Plus
4. Dolby Advanced Audio
5. Dolby Home Theater v3
6. Dolby Advanced Audio v2
7. Dolby Home Theater v4
8. Dolby Audio (UWP App) x64
9. Dolby Atmos (UWP App) x64
10. Dolby Atmos Sound Sytem (UWP App) x64
11. DTS Audio (DTS Studio Sound, DTS Headphone: X)
12. DTS Surround Sensation Speaker
13. DTS Surround Sensation Headphone
14. DTS Bass Enhancement
15. DTS Symmetry
16. DTS Boost
17. DTS Voice Clarification
18. DTS Connect (NeoC)
19. IntelliSonic Speech Enhancement Technology [For Microphone]
20. ASUS Sonic Focus
21. ASUS SonicMaster
22. SRS Premium Sound
23. ViPER4Windows
24. Sound BlasterX 720°

"Download:
Remove the older version before install newer version!"

 

[alanfox2000]

My realtek mod drivers had been deprecated.
If you are new here, use APO driver
http://puresoftapps.blogspot.com/2018/04/realtek-apo-driver.html

Jimmy9303, please read carefully on puresoftapp post. Clickable link - Sound enchancers

 

[night_mare007]

Restore Default Realtek Config on SPDIF and Speakers
Follow the guide here
http://puresoftapps.blogspot.com/2018/03/virtual-audio-cable-apo-user-guide.html
Use Virtual Audio Cable (VAC) by Eugene V. Muzychenko
Open Virtual Audio Cable Control Panel and set NC - 1...8, tick Volume Control and Enable Spk Pin
Open sound property, select capture tab, double click VAC (e.g. Line 1). Tick the checkbox "Listen to this device" and select SPDIF.
On Advanced tab(playback devices and capture devices), select the channel you want.
Load Sound Blaster X720 Config on VAC endpoint
On Realtek SPDIF Advanced tab, select DTS Interactive or Dolby Digital Live

@alanfox2000 - thanks for the reply.

I've installed your drivers from that link.
when I choose 5.1 format for digital SPDIF I get error ( view image ).

Spoiler: IMAGE

it doesn't matter if I use ORIG RLTKAPO64.dll & RLTKAPO.DLL - or if I use patched v60xx + DisableProtectedAudioDG = 1.
the only way I can get 5.1 format for my digital SPDIF is if I use FX CONFIGURATOR and change the "Endpoint FX APO" for my digital OUTPUT:

Spoiler: IMAGE

lastly, I've follow your instructions, I'd install APO x64 driver + virtual line driver and configured them as you wrote.
in FX CONFIGURATOR, i've selected "Speakers ( virtual audio cable)", imported ini named "Sound BlasterX 720 Win 10 8.1" ( since i'm win 10 and want to use SB720 ) , applied and restared audio service.

when virtual speaker is the default listen device, it is configured as 5.1 speakers + digital spdif is 5.1 format + default recording is LINE 1 virtual ( I enabled listen to SPDIF digital and configured as 6 channel, 24 bit, 96000 Hz) - I GET DISTORTIONS, like a ripple effect + SB 720 does NOT effect the output AT ALL !
( listen to the attach files, remove the .txt to rename them m4a ).

and most importantly, even when default listen device is the virtual speakers, and even when it is configured is as 5.1 speaker - SB720 STILL DETECTS IT AS STEREO INSTEAD OF 5.1 !

What can I do ?

UPDATE:
I think I manage to solve it in a weird way - somehow... i.e to have 5.1 format for digital SPDIF, while having SB720 to work and detect 5.1 speaker under its setup tab.

1. I set FX Configurator to this one:
   
   Spoiler: IMAGE

   
2. I don't need and don't use any of the virtual line ( although installed they are all disabled under playing/recording devices ).
3. my INTERNAL speaker MUST BE ENABLED, but the DIGITAL SPDIF is the default output device !
   NOTE1: w/o internal speaker being enabled - SB720 does NOT recognize 5.1 speaker format ! ( although enabled, no sound comes out of it, since digital SPDIF is the "default device" for audio output )
   NOTE2: one must CLOSE AND REOPEN SB720 after enabling/disabling/changing the config of any sound devices - inorder for SB720 to get the "Real"/current state of the system.
4. A small problem in SB720 -> setup -> Calibration screen raise/lowered surround dB -> I could NOT hear the change !
   
   P.S - just for search tag: G751JT, G751, G751J, soundblaster 720, Dolby Digital Live, DTS Interactive, digital, SPDIF, 5.1, windows 10 1709
   
   Spoiler: PROOF OF CONCEPT:

   

 

[popm]

how to change preset in dolby atmos to lenovo !!

 

[alanfox2000]

@night_mare007 use this config on SPDIF

 

[Jimmy9303]

My realtek mod drivers had been deprecated.
If you are new here, use APO driver
http://puresoftapps.blogspot.com/2018/04/realtek-apo-driver.html

Jimmy9303, please read carefully on puresoftapp post. Clickable link - Sound enchancers

I found it on your APOProject files
thanks a lot for your great hard work, I wish that I can mod myself these apps

 

[night_mare007]

@night_mare007 use this config on SPDIF

Thanks - I tried that - and AS IS, no 5.1 format existed for digital SPDIF.

putting "endpoint FX APO" of "{A29EB043-6CE2-4ee2-B38C-F58719E0D88F}" ( in the left side of fx configurator, i.e single value of endpoint fx apo ) - is the only one that gives me 5.1 format for digital output, that when selected works ( i.e w/o any popup of error "format not supported for this device" ).

I also found out that if I put "{A29EB043-6CE2-4ee2-B38C-F58719E0D88F}" at "composite endpoint FX APO" AS LONE VALUE OR AS COMBINATION WITH ANY OTHER VALUES - 5.1 format does shown or does not work ( format not supported popup error ).

I tried to play with the following list of values, and their different combination in the "composite" area in fx configurator

Spoiler: List of FX configurator values

5.1 working - no dolby tabs, no SB720 audio proccessing
{DA2C9ECE-7418-4906-B4FA-0A00B3EB88AA} StreamFX
{A296D363-EE83-4af9-9BE7-729C1296150A} Mode FX
{A29EB043-6CE2-4ee2-B38C-F58719E0D88F} Endpoint
{6861CFDC-0461-49d5-A8DF-BE5ACD02692F} P.Page

{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3} StreamFX
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3} Mode FX
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3} endpointFX

720 working - NO 5.1 format OR popup of format not supported
{F841F354-41AB-4652-81EF-F879AE87F9FC} StreamFX
{0803F79D-A6CB-42F1-A46C-A1B0F067FEFC} Mode FX
{801F7DFC-E551-4E01-9CAF-29BFC339984E} Endpoint
{74C7569D-ED69-4292-9886-CC89DD455744} P.Page


Additional values found in registry
{0F62DFB3-DB5B-458D-9371-6B45C4582560} SFX
{C69FE6AD-9AA8-45DE-BA75-C72117B21C07} MFX
{17AB05B2-E3B4-43FE-885B-06B84E251E5D} EFX

The only "best" combination I found to PARTIALLY work is the following:

Spoiler: 5.1 format works + SB720 enhance audio BUT NO 5.1 speaker format shown

[SFX]
{F841F354-41AB-4652-81EF-F879AE87F9FC}
[LFX]
[MFX]
{0803F79D-A6CB-42F1-A46C-A1B0F067FEFC}
[GFX]
[EFX]
{A29EB043-6CE2-4ee2-B38C-F58719E0D88F}
[OSFX]
[OMFX]
[UI]
{74C7569D-ED69-4292-9886-CC89DD455744}
[CompositeSFX]
[CompositeMFX]
[CompositeEFX]
[CompositeOSFX]
[CompositeOMFX]
[ProcessingSFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingLFX]
[ProcessingMFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingGFX]
[ProcessingEFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingOSFX]
[ProcessingOMFX]
[Notes]
SB720 + 5.1 digital SPDIF on G751JT

P.S - should I manually run any *.reg after settings the APO values in fx configurator ?
even if answer is YES, I did it - no change was seen in SB720.

 

[OghuzKhan]

can someone make how to install video on youtube or can someone share a text of installion step by step in onedrive or mediafire ? @alanfox2000 @Màthair @Jayce

 

[popm]

all work ( dts sb720 dolby dax2... )!!!! but dolby atmos dax3

 

[Jayce]

all work ( dts sb720 dolby dax2... )!!!! but dolby atmos dax3
View attachment 100985

Use Dolby Atmos uwp app instead. Dolby Atmos desktop dax3 is broken.

 

[alanfox2000]

{DA2C9ECE-7418-4906-B4FA-0A00B3EB88AA} Realtek SFX
{A296D363-EE83-4af9-9BE7-729C1296150A} Realtek MFX
{A29EB043-6CE2-4ee2-B38C-F58719E0D88F} Realtek EFX

{0F62DFB3-DB5B-458D-9371-6B45C4582560} Sound BlasterX 720 SFX
{C69FE6AD-9AA8-45DE-BA75-C72117B21C07} Sound BlasterX 720 MFX
{17AB05B2-E3B4-43FE-885B-06B84E251E5D} Sound BlasterX 720 EFX

DTS interactive and Dolby Digital Live 5.1 will not shown when adding Realtek EFX in CompositeEFX Registry Key
Add Realtek EFX in EFX Registry Key cause DTSi and DDL 5.1 format show
but it may conflict between EFX and CompositeEFX registry key
If the below config don't work, try Chaining_CT_Realtek_Render.ini (Win7 8 config) use on your win10

Sound BlasterX 720° and Realtek Audio Effects Config for SPDIF

[SFX]
[LFX]
[MFX]
[GFX]
[EFX]
{A29EB043-6CE2-4ee2-B38C-F58719E0D88F}
[OSFX]
[OMFX]
[UI]
{6861CFDC-0461-49d5-A8DF-BE5ACD02692F}
[CompositeSFX]
{0F62DFB3-DB5B-458D-9371-6B45C4582560}
{DA2C9ECE-7418-4906-B4FA-0A00B3EB88AA}
[CompositeMFX]
{C69FE6AD-9AA8-45DE-BA75-C72117B21C07}
{A296D363-EE83-4af9-9BE7-729C1296150A}
[CompositeEFX]
{A29EB043-6CE2-4ee2-B38C-F58719E0D88F}
{17AB05B2-E3B4-43FE-885B-06B84E251E5D}
[CompositeOSFX]
[CompositeOMFX]
[ProcessingLFX]
[ProcessingGFX]
[ProcessingSFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingMFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingEFX]
{C18E2F7E-933D-4965-B7D1-1EEF228D2AF3}
[ProcessingOSFX]
[ProcessingOMFX]
[Notes]
Supported OS: Windows 8.1, 10
-------------------------------------
Applications:
Sound BlasterX 720°
Realtek Audio Effects
-------------------------------------
Demand Registry Files:
REG_CT_Render.reg

I found it on your APOProject files
thanks a lot for your great hard work, I wish that I can mod myself these apps

Customize multiple audio effects with FX Configurator
http://puresoftapps.blogspot.com/2018/05/customize-your-multiples-audio-effects.html

 

[keyzjn]

Use the APO driver on my signature instead

How to fix this ? I'm trying to install APO Driver version 1.0.3

 

[OghuzKhan]

so...nobody share anything nobody says how to install step by step it's ok

 

[Diogo Silva]

Hello, How I can put DTS Sound Studio working with Sound Blaster 720º, in my Windows 10?
I Have FX configurator.

Thanks.

all work ( dts sb720 dolby dax2... )!!!! but dolby atmos dax3
View attachment 100985

How?
Sound Blaster 720º is the unique active, I can't fix compatibility with DTS Audio and Dolby Atmos.
Help me.
Thanks

 

[alanfox2000]

How to fix this ? I'm trying to install APO Driver version 1.0.3
View attachment 101034

Delete ‪C:\Windows\System32\DTSAPOUI64.dll, install again
If error still popup, just click ignore and run cmd as admin -> type regsvr32 DTSAPOUI64.dll

Hello, How I can put DTS Sound Studio working with Sound Blaster 720º, in my Windows 10?
I Have FX configurator.View attachment 101037
Thanks.


How?
Sound Blaster 720º is the unique active, I can't fix compatibility with DTS Audio and Dolby Atmos.
Help me.
Thanks

Use the original Realtek driver (not modded) and read tutorial on customize multiple audio effects with FX Configurator
http://puresoftapps.blogspot.com/2018/05/customize-your-multiples-audio-effects.html
One of the example is DTS Audio + Sound BlasterX 720
Or just load W10_Custom_CT_Dolby_UWP_DTS_Render.ini for DTS Audio + Sound BlasterX 720 + Realtek Audio Effects + Dolby UWP

so...nobody share anything nobody says how to install step by step it's ok

The install step has been written on APO Driver post(link)

 

[BobaBrett]

I was able to create a new Mod
It is based on HDXRT.inf of Realtek WHQL (6.0.1.8363).

Spoiler: Hawk Mod

DL Driver & Software http://www.mediafire.com/folder/6d0xu8wdnv57b/Realtek_HDA

Spoiler: Easy installation instructions

1 First select the software you want to work with Creative. Please put that DLL in WIN64.
2 If you use DTS X please put software before the driver!
(Jack detection FIX)

3 Select the driver you want to use.
Would you like Creative Only or Creative + Sub?
For DAX 3, we will issue an error so we recommend DAX 2.

4 Install the Realtek driver.
5 Please enjoy surround.

I will continue reading as I have written detailed information in the txt file.

Spoiler: Surround TEST Video

SBC3 Mod (Speaker) https://mega.nz/#!FBAFWaSD!Et9JsvBW-h-1tGgoQPpq5A4_0mla11YoOF9llU2jrXI
X720 Mod (Speaker) https://mega.nz/#!9MgnkbjB!YfJXtOm2amxfa6KB7VASKEzhftApqQ0SSuyTBcKQMN0
DTSX Asus (Headphone) https://mega.nz/#!EZAlBCQY!230ZMwPpaBQLLQeNTxqGTAOhxj_a2xhEfCm7V1dx5qU

Test environment: Windows 10 ALC 1220 (I do not have Win 7, Sorry)
Supported chip: ALC2xx - 12xx

Supported software:
ASIO support: Yes
Main: X-FI MB 5 or Cinema 3 or X 720
Sub: DOLBY DIGITAL PLUS
DOLBY AUDIO (DAX 2) or DOLBY ATOMS (DAX 3)
DTS X (Default ver or ASUS ver)
View attachment 97585

Hello I see you must have Asus Motherboard. I would like to use and do what you have taken screen shots of this is amazing that you guys have done this!! I was getting so mad that Asus sonic studio III was not letting me control my Astro A50 wireless headphones from Optical Audio port... I use the Asus Maximus Code IX mother board with the "ROG exclusive ALC1220" Currently I use the Realtek HD audio MOD+Suite Sound Blaster X-Fi MB5 I found this on you tube didn't even know this site was around till I googled a bit more. The drivers I use kind of work but Dolby Live are not working and i would like to use the x720 software. I downloaded all the files you have listed I just wanted to clarify you got all that working in these packages? How did you get ASUS realtek manager or is that a modded version to? THat is what mine looks like with stock drivers from asus. Anyway thanks for all this hope it prevents me needing me to spend extra money on sound card..

 

[amaan07]

Delete ‪C:\Windows\System32\DTSAPOUI64.dll, install again
If error still popup, just click ignore and run cmd as admin -> type regsvr32 DTSAPOUI64.dll


Use the original Realtek driver (not modded) and read tutorial on customize multiple audio effects with FX Configurator
http://puresoftapps.blogspot.com/2018/05/customize-your-multiples-audio-effects.html
One of the example is DTS Audio + Sound BlasterX 720
Or just load W10_Custom_CT_Dolby_UWP_DTS_Render.ini for DTS Audio + Sound BlasterX 720 + Realtek Audio Effects + Dolby UWP


The install step has been written on APO Driver post(link)

Hi Alan...i have installed dolby access app from windows store, i am noticing different sound effect between dolby atmos for headphone and dolby atmos UWP... Doesn't dolby atmos UWP produce same sound effect like dolby access app?

 

[alanfox2000]

Hi Alan...i have installed dolby access app from windows store, i am noticing different sound effect between dolby atmos for headphone and dolby atmos UWP... Doesn't dolby atmos UWP produce same sound effect like dolby access app?

dolby atmos for headphones (headphones settings)
dolby atmos UWP App (speakers + headphones settings)

 

[amaan07]

dolby atmos for headphones (headphones settings)
dolby atmos UWP App (speakers + headphones settings)

u mean to say that i should get same sound effect from dolby atmos UWP App like i get from Dolby access app?

 

[Diogo Silva]

Use the original Realtek driver (not modded) and read tutorial on customize multiple audio effects with FX Configurator
http://puresoftapps.blogspot.com/2018/05/customize-your-multiples-audio-effects.html
One of the example is DTS Audio + Sound BlasterX 720
Or just load W10_Custom_CT_Dolby_UWP_DTS_Render.ini for DTS Audio + Sound BlasterX 720 + Realtek Audio Effects + Dolby UWP

@alanfox2000, With Original Realtek driver and Fx Configurator I can select the programs, for example: I want DTS Audio, Dolby for Home Theater and SB 720º and don't care Dolby Atmos.
I'm right or not?
If I'm wrong please explained me.
Thank you.

 

[alanfox2000]

@alanfox2000, With Original Realtek driver and Fx Configurator I can select the programs, for example: I want DTS Audio, Dolby for Home Theater and SB 720º and don't care Dolby Atmos.
I'm right or not?
If I'm wrong please explained me.
Thank you.

No audio effects if you not select Dolby Atmos config (Dolby UWP Win 10.ini).
You want the below multiple audio effects, follow the customize multiple audio effects tutorial in order to combine 3 configs into 1 config:
DTS Audio + Dolby Home Theater v4 + Sound BlasterX 720
DTS Audio Win 10 8.1.ini + Dolby PCEE4.ini + Sound BlasterX 720 Win 10 8.1.ini

u mean to say that i should get same sound effect from dolby atmos UWP App like i get from Dolby access app?

Since I don't have Dolby Access, but I ensure the audio effect is different on speakers.

 

[Romulus2K4]

Can someone provide me with simple instructions for making only "Creative Sound Blaster X 720" fully functional with Realtek High Definition Audio (ALC 898, BIOSTAR Hi-Fi Z77X)?

I'll really appreciate the help. I have tried @alanfox2000's instructions by using an unmodified Realtek HD Driver installation and the APO driver (with KGAGEN applied) but then Creative Sound Blaster X 720 won't detect my audio device, probably due to missing keys/registry that is usually within modified .inf files.