Post your Cinebench R23 Score

[islandgam3r]

Finally finished building 1st custom water-cooled rig and I ran 1st batch of bench-marking! I have to say I am satisfied with results! I also threw in my 3DMARK and PCMARK Tests.

Rig Specs:
AMD Ryzen 9 3900X
ASROCK X570 TAICHI
32GB TridentZ Royal 3600Mhz @16-16-16-36 Timings
1TB Corsair MP600 PCIE Gen4 Nvme [x2] & WD BLACK 4TB HDD
SAPPHIRE Nitro+ Vega 56 LE
1000W EVGA SuperNova P2 PSU

All @ Stock out-of-box settings
CPU didn't get hotter than 76 degrees

 

[phanbuey]

Changed up the rig:

not bad for a $280 ebay 8700k and a z370 board someone gave to me

 

[biffzinker]

not bad for a $280 ebay 8700k and a z370 board someone gave to me

Considering the clockspeed I'm surprised it only scored 4023. This 3600 at 4.2 GHz is scoring 3779. Imagine what the score would of been with 3600 at 5.084 GHz.

 

[ibace]

My turn...

 

[phanbuey]

Considering the clockspeed I'm surprised it only scored 4023. This 3600 at 4.2 GHz is scoring 3779. Imagine what the score would of been with 3600 at 5.084 GHz.

I know! the zen 3 4600 is going to be the chip to have for gaming i think (maybe they'll move to 8core for the 6 series by then). If AMD can get clocks in the 4.7Ghz range it will absolutely wipe the floor with the coffees.

I was actually really tempted to buy the 3600 but it would have been more expensive since I would want a decent board to run 32gb - so a 8700k @ 5ghz daily / 5.1 ghz benches will do nicely for now. Going to wait for decent B550 boards to pair with a zen 3 before i switch. Unless intel pulls off a miracle with ice lake (highly doubtful).

 

[Divide Overflow]

3900X
Air cooling

 

[sam_86314]

Ran it on my Plex server after installing the new cooler.

Xeon X3470 (stock speed), Akasa Nero LX (air cooled).

Slightly better than when this chip was in the Optiplex.

 

[Roddey]

3800x with abba bios

 

[Voltaj .45 ACP]

3700x ABBA all stock

 

[phanbuey]

was able to get some time this weekend tweak the system a bit and stabilize everything for a daily clocks @5.1ish 3600 ram...

Still nowhere near the ryzen clock / CB but not bad - only lost about 900Pts all core going from a 7820x @ 4.7

 

[biffzinker]

was able to get some time this weekend tweak the system a bit and stabilize everything for a daily clocks @5.1ish 3600 ram...

I had to back off on the 4.2 GHz with my 3600. The thermal heat density on the tiny chiplet is a little worrying for me, not to mention the amperage current draw. Doesn't help I apparently got a lower bin chiplet that requires 1.43V for stability.

 

[derp]

3900x (dont remember actual clocks, forgot to save) RAM 3533c14
Sorry for some other stuff on screen, but u can see mobo and agesa here


and run when other benches were closed

PS cpu-z shows only freq of 1st core, so its kinda pointless for multicore cpu where each core have different boost clocks.

 

[islandgam3r]

3900x (dont remember actual clocks, forgot to save) RAM 3533c14
Sorry for some other stuff on screen, but u can see mobo and agesa here
View attachment 131926

and run when other benches were closed
View attachment 131927

i think once i tweak my RAM from 16-16-16-36 to 14s Timings i probs would hit your score and beyond =)

 

[derp]

i think once i tweak my RAM from 16-16-16-36 to 14s Timings i probs would hit your score and beyond =)

oh yea... spent over 30h on mem tweaking and in my case DR4000c16 uncoupled still gives better results, than 3533c14 (which was much harder to stabilize).

 

[phanbuey]

I had to back off on the 4.2 GHz with my 3600. The thermal heat density on the tiny chiplet is a little worrying for me, not to mention the amperage current draw. Doesn't help I apparently got a lower bin chiplet that requires 1.43V for stability.

What are you running it at now?

 

[biffzinker]

What are you running it at now?

Stock since the 4.2 GHz OC wasn't stable for me with the update to AGESA 1.0.0.3ABB.

- Update AMD ComboPI1.0.0.3abb Release Date 2019-09-09

 

[Voltaj .45 ACP]

was able to get some time this weekend tweak the system a bit and stabilize everything for a daily clocks @5.1ish 3600 ram...

View attachment 131906

Still nowhere near the ryzen clock / CB but not bad - only lost about 900Pts all core going from a 7820x @ 4.7

only lost about 900Pts all core going from a 7820x @ 4.7

yeah but single is more important no matter how core you have.thumbs up nice score.

 

[PrimoGhost]

Single Core - 598
Multi - 4422

Noctua Nh-d15

 

[islandgam3r]

Ran my Cinebench 20 pass again because yesterday I had updated my BIOS to the new Agesa ABBA one and I gained 134 points higher than my original run for Multi-Core and only 9 more points on the Single-Thread. All of this is @stock settings for CPU.

 

[phanbuey]

Single Core - 598
Multi - 4422

Noctua Nh-d15

That's amazing - what is your 24/7 settings?

 

[PrimoGhost]

Thank You.
5000 Core / 4600 Uncore. 4000CL17.
Runs almost passive

 

[Voltaj .45 ACP]

Ran my Cinebench 20 pass again because yesterday I had updated my BIOS to the new Agesa ABBA one and I gained 134 points higher than my original run for Multi-Core and only 9 more points on the Single-Thread. All of this is @stock settings for CPU.

View attachment 132392

my single is 511 and my friend in DH 512.all 3700x 4.4 ghz stock.your's 4.6 turbo and it's single core test.how come?your mb maybe not good as ours because mb affect score.

Thank You.
5000 Core / 4600 Uncore. 4000CL17.
Runs almost passive

congrats you passed my 4.1 ghz 2700x multi.

 

[realcoolwizard]

Macbook Pro 2018

 

[islandgam3r]

my single is 511 and my friend in DH 512.all 3700x 4.4 ghz stock.your's 4.6 turbo and it's single core test.how come?your mb maybe not good as ours because mb affect score.


congrats you passed my 4.1 ghz 2700x multi.

View attachment 132415

I tested my mobo a bunch of times. Everything checked out so I don't think anything is wrong with it. Also since the ABBA update my voltage for has evened out way more than it was before, it was never too high but it fluctuated between low to high 1.4Vs and also some of my cores boost higher than they did before.

 

[Voltaj .45 ACP]

I tested my mobo a bunch of times. Everything checked out so I don't think anything is wrong with it. Also since the ABBA update my voltage for has evened out way more than it was before, it was never too high but it fluctuated between low to high 1.4Vs and also some of my cores boost higher than they did before.

i mean mb vrm not settings.all settings auto except ram.aorus master 510 before ABBA but bunch of 570's under 500 get it?