I have a new build computer with the following hard ware…..
Motherboard: ASUS ROG STRIX X570-E GAMING
BIOS: Version 1408
CPU: Ryzen 9 3950X
RAM: G.Skill Trident F4-3200C14D-32GTZR
(Kingston KVR24E17S8/8)
GPU: 2XNvidia GTX1070
M.2 Samsung 970 EVO Plus
M.2 Samsung 860 EVO
The problem is that when have a memory stick in DIMM slot A1 or A2 and try to start the computer I end up with a black screen and the motherboard Q-code displays 0d which according to the manual stands for ”Reserver for future AMI SEC codes” and the Q-LED for DRAM lights up with a steady light.
I have reset the CMOS and tried with a different memory but I still get the same error.
If I put the memory sticks in DIMM slot B1 or B2 everything seams to work ok and I get to the BIOS screen and in this case the Q-code displays 0c which also is a code for ”Reserver for future AMI SEC codes”
So fare I can only run the computer with the RAM in a single channel configuration with the memory installed in the B DIMM-slots.
Any ideas on what might cause this problem?
As the RAM seams to work fine when put in slot B1 and B2 I guess they are ok.
Is it most likely a faulty motherboard or CPU that causing this?
Motherboard: ASUS ROG STRIX X570-E GAMING
BIOS: Version 1408
CPU: Ryzen 9 3950X
RAM: G.Skill Trident F4-3200C14D-32GTZR
(Kingston KVR24E17S8/8)
GPU: 2XNvidia GTX1070
M.2 Samsung 970 EVO Plus
M.2 Samsung 860 EVO
The problem is that when have a memory stick in DIMM slot A1 or A2 and try to start the computer I end up with a black screen and the motherboard Q-code displays 0d which according to the manual stands for ”Reserver for future AMI SEC codes” and the Q-LED for DRAM lights up with a steady light.
I have reset the CMOS and tried with a different memory but I still get the same error.
If I put the memory sticks in DIMM slot B1 or B2 everything seams to work ok and I get to the BIOS screen and in this case the Q-code displays 0c which also is a code for ”Reserver for future AMI SEC codes”
So fare I can only run the computer with the RAM in a single channel configuration with the memory installed in the B DIMM-slots.
Any ideas on what might cause this problem?
As the RAM seams to work fine when put in slot B1 and B2 I guess they are ok.
Is it most likely a faulty motherboard or CPU that causing this?