RH Realtek UHD Audio Driver for ALL HD Audio ICs for Windows 10/11

[Hristov RH-Records]

Hi Friends,
That is my new UHD driver mod with Nahimic, Dolby PCEE4, Creative and DTS X ULTRA grace a Ferather.
Test mode must be enabled in the moment. I provide two variant's with DOLBY DIGITAL and DTS INTERACTIVE.
THE LINK to download is https://1drv.ms/f/s!AkGtxiGigudSzVLpSjYdvkAqrejL
Pro Options - Each connector can be customizable as speakers, line or micro. Working Stereo Mix.

 

[harpal4u]

sound output (also input from media players) is very low,

i reverted back to "DJ Urko Driver", now NAHIMIC is not working


this installation has updated dependencies/libraries..

tried to install like more than 8-9 times (DJ Urko Driver) with cleaning all drivers and bla bla... but nahimic is not able to find correct audio device

i am unable to find old thread to get support/troubleshoot

 

[Hristov RH-Records]

@harpal4u are you have enabled test mode with disable integrity checks? you must download latest nahimic from the store, are you applied in all messages install it anyway? because the inf is separated use dolby digital version release 3 in my link so clean your drivers and put wise registry cleaner also then try to install it

Redirecting

The link to enable test mode correctly.
The secureboot must be disabled in bios and what version of windows you run?

 

[harpal4u]

@Hristov RH-Records , yes i have done everything correctly and everything is working fine. i have done it successfully and tested it with both drivers provided in this thread. I have used both NAHIMIC 1.2.x, 1.3.x.(from store) and both are working fine.

in short both drivers from this thread is working. Thanks for your hard work. love u
but somehow i am not happy with low sound. I will give it another shot again with double checks , lets hope it satisfy me

and about NAHIMIC not working now, its for DJ Urko Driver, (i was using previously before this thread). since i reverted back, but now NAHIMIC not working, not recognizing devices for DJ Urko Driver.

can u please gimme that (DJ Urko Driver) thread link? i m not able to find it

 

[Hristov RH-Records]

@harpal4u thats my OLD driver man forget it. Its not working anymore. I can not give you support for that driver. The UHD Driver is the future. Why low sound? the speakers are always low than headphones. just switch to headphones the green connector...

 

[emanresu]

HDA ftw

 

[DeathThrills]

Ayoo I Knew It DJ Urko Aka Hristov-RH-Records Is Back (Mind Saying What That Name Means?)
And Btw This Driver Is Amazing I Was Just Scrolling Found This Thread XD
And Anytime In The Future Could You Find A Way To Make This Work With Secure Boot And Without Test Mode?
That's My Only Issue Otherwise Good Job This Is Amazing!
Thanks For Coming Back!

(Edited For Fixing Misspelled Words Btw Most FIles Are Corrupted)

 

[Hristov RH-Records]

Voila the Release 4 with DDP and DOLBY ATMOS Gaming. @DeathThrills I learn now this sollution....

 

[harpal4u]

@Hristov RH-Records , wow lovely

what is execTI? what is the sequence of installation?

update: its for spdif formats. if u have it install it. its optional

Steps to install:

uninstall any previous audio drivers, realtek, double check with Driver Store Explorer

1. run cmd as admin, put pc in testmode
   1. bcdedit.exe -set TESTSIGNING ON
   2. if neccessary, then reboot and run another command= Bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS
2. reboot
3. go into realtek drivers folder, run setup. press yes to install on each warning but dont reboot in last
4. now go into apps folder > uwp_sbc > genKGA > run GenKGA . bat with admin, install 720 profiles
5. reboot
6. enable developer mode in settings (search in start)
7. install each .AppxBundle with powershell (as adminstrate)
   1. open powershell as admin
      1. Add-AppxPackage -Path "c:\folder\app.AppxBundle"
8. NOTE: while installing DolbyDigitalPlusHT.msi , do not forget to create shortcut else DDP will not appear in start
9. about ExecTI, its for spdif formats. if u have it install it. its optional
10. AtmosSpeakerProfiles: want to change atmos profiles to 5.1 or 7.1? replace in C:\Windows\System32\dolbyaposvc but u can use only one, rename it to Default.xml
11. enjoy,

if there is no line in or mic in clicking on OPTIMIZER & REGULATOR in dolby home theater, app will crash

thanks a lot for drivers

 

[DeathThrills]

@DeathThrills I learn now this sollution....

So... After I Downloaded Your Drivers And Installed Them My USB Corrupted...
Im Gonna Try To Recover A Few Drivers And Files That Are VERY Important Tomorrow But Any Help Would Be Nice And You Have To Fix This Or Is It Myside Im not Sure But All I Know Is That It Started With This Driver Not Complaining Just Letting You Know For A Fix

 

[Hristov RH-Records]

@DeathThrills which usb ? try to plug and unplug the driver are not reacted to usb. Open device manager and unninstall your usb drivers with attempt then put scan for hardware changes, i think its your side.

 

[DeathThrills]

@DeathThrills which usb ? try to plug and unplug the driver are not reacted to usb. Open device manager and unninstall your usb drivers with attempt then put scan for hardware changes, i think its your side.

Ill Try That Just This Happened After I Downloaded And Moved The Driver Files Onto The USB So I Know It Was Either I Messed Up Somehow Or Just The Drivers Were A Issue

EDIT: Just Tried Driver Reinstalling No Luck Ill Just Use Like EaseUS DRW Or Stellar DR Later And The USB Was Named LEXAR Then Changed To This And Drive Letter Was F: Now D: And Theres Some Weird Files I Have A Local Backup But A Few Things Are Missing Alot Of Pictures, 2-3 Drivers, Overall Stuff, Anyway This Basically Isnt Any Of Your Fault Its Prob Mine So You Dont Mind Just Updating You So Yeah... But Help Would Be Nice!

 

[Hristov RH-Records]

@DeathThrills look for recovery tool after format in interner like recovermyfiles. Then try to recover all these stuff from your usb stick. You have doing something with this stick so... Dont use any other software just recovering tool

 

[DeathThrills]

@DeathThrills look for recovery tool after format in interner like recovermyfiles. Then try to recover all these stuff from your usb stick. You have doing something with this stick so... Dont use any other software just recovering tool

So Format Drive Then Woudnt That get Rid Of Any Data Traces? And Isnt Recovermyfiles Same As EaseUS DRW?
Sus News But EaseUS Gives Me 636.837GB OF STUFF ON A 64GB USB????

 

[Hristov RH-Records]

So Format Drive Then Woudnt That get Rid Of Any Data Traces? And Isnt Recovermyfiles Same As EaseUS DRW?
Sus News But EaseUS Gives Me 636.837GB OF STUFF ON A 64GB USB????

Just find an app that recover files after format thats it

 

[DeathThrills]

Just find an app that recover files after format thats it

Will Do!

 

[Deleted member 57642]

Tried both the modded drivers (multiple versions) and official OEM Drivers (from MSI since i have an MSI product) - from the latest versions released with/for newer MSI laptops - and have similar issue on all of them: The drivers install and work for most part - BUT - if the PC goes to sleep - while waking-up the sound doesn't work anymore (at all). Funny enough (or ironic if you will) - checking the Driver in Device Manager no issues are reported: "This device is working properly." Even more than that - while playing a video - the volume meter reacts (as if picking up sound frequencies and moving up and down following the sound pattern/wave) - but there's no sound whatsoever (as if muted or disabled). That's what happens with every official OEM driver i tried. With modded drivers (same goes for the latest generic drivers) - on top of that issue - the sound doesn't work unless i have Audio Enhancements Enabled (Device Default Effects).

No issue with the hardware tho (fortunately). If i use the generic drivers chosen/installed by Windows - no such issues - tho this drivers come with limitations (Realtek Audio Console doesn't work). Thus, using the latest official OEM drivers meant for this laptop - everything works as intended (be if it while using extra features like Nahimic, Audio Enhancements Enabled/Disabled or the Realtek Audio Console). Honestly, i only tried the modded drivers - out of curiosity - mainly because they're newer (2022 and now 2023 - while the OEM drivers were released in 2020 - and supposedly meant only for Windows 10 64 bit - tho, to be fair - Windows 11 is still Windows 10 at its core - if not Windows 7). Guess i'll stick with what works (as the old saying goes: if it ain't broke don't fix it ).

 

[Jayce]

Is this compatible with NVIDIA High Definition audio driver?

 

[DeathThrills]

Is this compatible with NVIDIA High Definition audio driver?

DS1 And DTPC Are And The Main Driver Is For Realtek(R) Audio