(omg)vflash | Fully Patched nvflash from X to Ada Lovelace [v5.780]

[R-T-B]

No. The Falcon is the name for the naive.
It is a defense that is controlled GSP RISC-V.

They are actually factually seperate subsystems, but ok. Before turing lacks gsp.

 

[lerutis]

So cool,

So, i *guess* i could flash

Colorful RTX 4070 12 GB BIOS​

VBIOS Version:	95.04.3E.40.B9

on my

Gigabyte RTX 4070 12 GB BIOS​

VBIOS Version:	95.04.3E.40.D2

Colorful have some more power and more boost to it.

what you all think?

Colorful RTX 4070 VBIOS

12 GB GDDR6X, 1920 MHz GPU, 1313 MHz Memory

www.techpowerup.com

Gigabyte RTX 4070 VBIOS

12 GB GDDR6X, 1920 MHz GPU, 1313 MHz Memory

www.techpowerup.com

 

[Deleted member 218758]

Go for it @lerutis
has same display out

don't worry
if it flashes, it will work
Just dont flash ~ OC Lab, Matrix, Lightning, Kingpin

EDIT:
But rather flash

Gigabyte RTX 4070 VBIOS

12 GB GDDR6X, 1920 MHz GPU, 1313 MHz Memory

www.techpowerup.com

would be 320W bios, vs 250W one

 

[notoperable]

Tried to replace GOP for a newest version possible I could find for 3080 (GOP Update Tool does that automatically, much less fuzz then imhexing),
Before that, running nvflashk.exe --version current.rom gave this:

Hierarchy ID          : Normal Board
Chip SKU              : 200-0
Project               : G132-0030
Build Date            : 10/23/20
Modification Date     : 03/13/21
UEFI Version          : 0x60009 ( x64 ) <-- VERSION BEFORE
UEFI Variant ID       : 0x000000000000000A ( GA1xx )
UEFI Signer(s)        : Microsoft Corporation UEFI CA 2011

after swapping the UEFI GOP module:

Hierarchy ID          : Normal Board
Chip SKU              : 200-0
Project               : G132-0030
Build Date            : 10/23/20
Modification Date     : 03/13/21
UEFI Version          : 0x60017 ( x64 ) <-- VERSION AFTER
UEFI Variant ID       : 0x000000000000000A ( GA1xx )
UEFI Signer(s)        : Microsoft Corporation UEFI CA 2011

However, nvflashk.exe cant flash it ...

C:\Users\zero\Downloads>nvflashk.exe -6 current_3080_0x60017.rom
nvflashk pre-release
github.com/notfromstatefarm/nvflashk - Safer GUI version with autorecovery coming by September!
Checking for matches between display adapter(s) and image(s)...
Reading EEPROM (this operation may take up to 30 seconds)
Current      - Version:94.02.42.C0.14 ID:10DE:2206:3842:3885
               GPU Board (Normal Board)
Replace with - Version:94.02.42.C0.14 ID:10DE:2206:3842:3885
               GPU Board (Normal Board)

Update display adapter firmware?
Press 'y' to confirm (any other key to abort):
Reading EEPROM (this operation may take up to 30 seconds)

Nothing changed!
ERROR: Invalid firmware image detected.

Too bad, would love to try this out finally

 

[miguel80799]

hello, does anyone know how I can change the id of a 2060 super fe 1f47 to a 2060 super fe 1f06? I want to change the id since both cards are similar and I would like the rbg that won't let me change the color. It gives me this error: Bypassing the Board ID mismatch

Current - Version:90.06.45.00.01 ID:10DE:1F47:10DE:13AD
GPU Board (Normal Board)
Replace with - Version:90.06.44.00.01 ID:10DE:1F06:10DE:13A2
GPU Board (Normal Board)

Update display adapter firmware?
Press 'y' to confirm (any other key to abort):
Reading EEPROM (this operation may take up to 30 seconds)

Reading EEPROM (this operation may take up to 30 seconds)


Nothing changed!
PROGRAMMING ERROR: EEPROM Program failed
*translated by google transale*

 

[notoperable]

@Veii - independently of that, thank you for your work - it is a serious well done hacking I really appreciate your work here (since it seems i'm here just to finding holes in cheese - its not that)

 

[rusTORK]

For my RTX 3080 Ti FTW3 Ultra is useless, right? It's already have got 450W cap (OC VBIOS). And higher only 1000W from GALAX (from 3090 i think). Since i am on air - it's better to not mess with it.

Any other fixes\unlocks availible?

 

[Deleted member 218758]

For my RTX 3080 Ti FTW3 Ultra is useless, right? It's already have got 450W cap (OC VBIOS). And higher only 1000W from GALAX (from 3090 i think). Since i am on air - it's better to not mess with it.

Any other fixes\unlocks availible?

Will respond within 24h
had XOC bios (not galax)

just not on personal system
Research system is in testing state

@Veii - independently of that, thank you for your work - it is a serious well done hacking I really appreciate your work here (since it seems i'm here just to finding holes in cheese - its not that)

I think you missed the thread
no nvflashK support here

flash with omgvflash -6 romname.rom -L log.txt
Upload full log, to help us with the layout ~ and me filling cheeseholes
Falcon eats many mice, but some holes are left that i need to fix for next release.

hello, does anyone know how I can change the id of a 2060 super fe 1f47 to a 2060 super fe 1f06? I want to change the id since both cards are similar and I would like the rbg that won't let me change the color. It gives me this error: Bypassing the Board ID mismatch

Give me the log and a GPU-Z screenshot please
Need to know which EEPROM this has
2000 series is half sw unlocked, half is not
one eeprom makes trouble

ISSI is fully unlocked, Winbound is half working half not.

 

[notoperable]

Im old, I can mix up and get away with it with that

 

[lerutis]

Go for it @lerutis
has same display out

don't worry
if it flashes, it will work
Just dont flash ~ OC Lab, Matrix, Lightning, Kingpin

EDIT:
But rather flash

Gigabyte RTX 4070 VBIOS

12 GB GDDR6X, 1920 MHz GPU, 1313 MHz Memory

www.techpowerup.com

would be 480W bios, vs 250W one

cool, didnt notice that one, will give it a try

 

[miguel80799]

Will respond within 24h
had XOC bios (not galax)

just not on personal system
Research system is in testing state


I think you missed the thread
no nvflashK support here

flash with omgvflash -6 romname.rom -L log.txt
Upload full log, to help us with the layout ~ and me filling cheeseholes
Falcon eats many mice, but some holes are left that i need to fix for next release.


Give me the log and a GPU-Z screenshot please
Need to know which EEPROM this has
2000 series is half sw unlocked, half is not
one eeprom makes trouble

ISSI is fully unlocked, Winbound is half working half not.

 

[Deleted member 218758]

https://www.techpowerup.com/vgabios/239115/239115 @rusTORK 3080ti 580W bios
GALAX OC Labs is on Techpowerup , but i remember there was another "usable" one
OC Lab wont work , unless bios is specifically patched.

EDIT:
Sleep deprived nonsense, looked at the wrong value
I still have another one, but i'll respond tomorrow

 

[lerutis]

all done, my 4070 windforce oc is now a

Gigabyte RTX 4070 12 GB BIOS​

(Gaming OC) with 320w power and higher boost ;]​

LOVE IT! easy peasy

Only one problem, GPU-Z cant read any info now

 

[Deleted member 218758]

@miguel80799
You tried to deviceID rebrand ~ from 1F47 away to another.
Falcon denied, and InfoROM says not consumer state.

Looks to be two 2060 Super
1F47 8GB & 1F06 8GB

Flash this to rebrand away from FE ~ 269W bios

Asus RTX 2060 Super VBIOS

8 GB GDDR6, 1470 MHz GPU, 1750 MHz Memory

www.techpowerup.com

I will have to fix couple of stuff with ChipID rebrand.

Give log of this flash.

 

[rusTORK]

https://www.techpowerup.com/vgabios/239115/239115 3080ti 580W bios

Hmmm... It's description say it's 350W (target) and 450W (limit). Adjustment range - +29%.

On my EVGA 400W\450W and adj. range is 12%. My maximum board power on OC VBIOS (+113% power) - 450W+ (451\456W) depends of benchmark (Port Royal\Superposition).

So, that ROG VBIOS can't be 580W, since 350W+29%=451,5W (approx.).

Or that specific VBIOS was edited somehow?

 

[lerutis]

all done, my 4070 windforce oc is now a

Gigabyte RTX 4070 12 GB BIOS​

(Gaming OC) with 320w power and higher boost ;]​

LOVE IT! easy peasy

Only one problem, GPU-Z cant read any info now

nevermind, updated drivers with clean install, all good!

 

[Deleted member 218758]

So, that ROG VBIOS can't be 580W, since 350W+29%=451,5W (approx.).

Nono you are fully right, i looked at something else
My bad , tired.

Edited earlier post
Will respond tomorrow.
I know we had something.

 

[miguel80799]

@miguel80799
You tried to deviceID rebrand ~ from 1F47 away to another.
Falcon denied, and InfoROM says not consumer state.

Looks to be two 2060 Super
1F47 8GB & 1F06 8GB

Flash this to rebrand away from FE ~ 269W bios

Asus RTX 2060 Super VBIOS

8 GB GDDR6, 1470 MHz GPU, 1750 MHz Memory

www.techpowerup.com

I will have to fix couple of stuff with ChipID rebrand.

Give log of this flash.

It does let me but I don't have performance and besides I can't control the rgb. The problem is that for 1f47 there is no compatible bios like 1f06, is there no way to control it?

 

[Deleted member 218758]

It does let me but I don't have performance and besides I can't control the rgb. The problem is that for 1f47 there is no compatible bios like 1f06, is there no way to control it?

What card is this ?

Why are you on PCIe x8 ?

 

[miguel80799]

What card is this ?

Why are you on PCIe x8 ?

What card is this ?

Why are you on PCIe x8 ?

the card is the rtx 2060 super fe with the bios of the asus but there are several id of these graphics the 1f47 and the 1f06. and it is in pci x8 because I have a rx580 for hackintosh share bus. The one that I have the problem is the 1f 47 that there is no bios to be able to control the rgb so I wanted to change the id to evga 1f06

 

[notoperable]

the card is the rtx 2060 super fe with the bios of the asus but there are several id of these graphics the 1f47 and the 1f06. and it is in pci x8 because I have a rx580 for hackintosh share bus. The one that I have the problem is the 1f 47 that there is no bios to be able to control the rgb so I wanted to change the id to evga 1f06

Tried OpenRGB? Try the nightly build and in many cases you can try to send raw spi data to the rgb led mcu and see what happens.

 

[miguel80799]

As I understand it, it is blocked at the bios level if I knew where it is located in the rom that information could be accessed but I don't know how these files work.
translated by google

 

[notoperable]

As I understand it, it is blocked at the bios level if I knew where it is located in the rom that information could be accessed but I don't know how these files work.
translated by google

Install OpenRGB nightly and let it query your devices, and use the CLI or enable logging in the gui for better overview

 

[chraac]

https://github.com/OhGodAGirl/OhGodADump-NVIDIA This is interesting for you, but not through web.archieve. Its erased.

fork repo by someone: https://github.com/matthewkfho/OhGodADump-NVIDIA

 

[Shelly74]

I have the Asus TUF RTX 4070 Ti non-oc. Can I use the Bios from the OC Version or from the MSI Gaming X Trio RTX 4070 Ti?