• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Youtube, Discord, Visual Studio Code are flickering with black checkered squares/vertical lines. Partial solutions to this issue.

Joined
Mar 6, 2017
Messages
3,357 (1.18/day)
Location
North East Ohio, USA
System Name My Ryzen 7 7700X Super Computer
Processor AMD Ryzen 7 7700X
Motherboard Gigabyte B650 Aorus Elite AX
Cooling DeepCool AK620 with Arctic Silver 5
Memory 2x16GB G.Skill Trident Z5 NEO DDR5 EXPO (CL30)
Video Card(s) XFX AMD Radeon RX 7900 GRE
Storage Samsung 980 EVO 1 TB NVMe SSD (System Drive), Samsung 970 EVO 500 GB NVMe SSD (Game Drive)
Display(s) Acer Nitro XV272U (DisplayPort) and Acer Nitro XV270U (DisplayPort)
Case Lian Li LANCOOL II MESH C
Audio Device(s) On-Board Sound / Sony WH-XB910N Bluetooth Headphones
Power Supply MSI A850GF
Mouse Logitech M705
Keyboard Steelseries
Software Windows 11 Pro 64-bit
Benchmark Scores https://valid.x86.fr/liwjs3

mark152

New Member
Joined
Dec 10, 2023
Messages
10 (0.03/day)
What's that?
Check my post at page 13 (#303). It's a workaround for the black checkerboard issue. It works both for chrome and edge. If you are only interested in chrome it may be enough to change the angle settings like explained in the previous page (i personally use open gl but there are other options too).
 
Joined
Mar 6, 2017
Messages
3,357 (1.18/day)
Location
North East Ohio, USA
System Name My Ryzen 7 7700X Super Computer
Processor AMD Ryzen 7 7700X
Motherboard Gigabyte B650 Aorus Elite AX
Cooling DeepCool AK620 with Arctic Silver 5
Memory 2x16GB G.Skill Trident Z5 NEO DDR5 EXPO (CL30)
Video Card(s) XFX AMD Radeon RX 7900 GRE
Storage Samsung 980 EVO 1 TB NVMe SSD (System Drive), Samsung 970 EVO 500 GB NVMe SSD (Game Drive)
Display(s) Acer Nitro XV272U (DisplayPort) and Acer Nitro XV270U (DisplayPort)
Case Lian Li LANCOOL II MESH C
Audio Device(s) On-Board Sound / Sony WH-XB910N Bluetooth Headphones
Power Supply MSI A850GF
Mouse Logitech M705
Keyboard Steelseries
Software Windows 11 Pro 64-bit
Benchmark Scores https://valid.x86.fr/liwjs3
Check my post at page 13 (#303). It's a workaround for the black checkerboard issue. It works both for chrome and edge. If you are only interested in chrome it may be enough to change the angle settings like explained in the previous page (i personally use open gl but there are other options too).
Here's to hoping that it'll solve this issue...
 

OneMoar

There is Always Moar
Joined
Apr 9, 2010
Messages
8,797 (1.64/day)
Location
Rochester area
System Name RPC MK2.5
Processor Ryzen 5800x
Motherboard Gigabyte Aorus Pro V2
Cooling Thermalright Phantom Spirit SE
Memory CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s) GIGABYTE RTX 3070 Ti GAMING OC
Storage Nextorage NE1N 2TB ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s) LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case Phanteks P300 /w 300A front panel conversion
Audio Device(s) onboard
Power Supply SeaSonic Focus+ Platinum 750W
Mouse Kone burst Pro
Keyboard SteelSeries Apex 7
Software Windows 11 +startisallback
open your curve optimiser and do something like this ( attached below)
this solves the problem without needing to enable max performace mode the issue is not enough voltage to sustain the clocks in microbursts this is caused by something in chrome thats causing very short bursts in gpu load which is faster then the nvidia driver will ramp in voltage resulting in minior instablity

a curve like this also results in the gpu staying in boost clocks longer simply because load
you want the high-side of the curve to operate like a clock-step and less like a curve so you need to know what the maxium voltage the gpu will allow is and then raise that to 20-30mzh Above your desired load clocks ( to account for thermals reducing the clock target) in my case thats 1.1v and 2040Mz at >=70c give or take a few degrees

this is a regression not a new bug both the 1000 and 2000 series cards had this exact same issue something is janky with the way chrome loads up and nvidias powermisering at low gpu loads
Edit: fixed screenshot

for those that don't understand how co works this effectively adjusts the range that the powermiser can operate in without giving up performance or power consumption where it matters
 

Attachments

  • Screenshot 2024-02-25 123812.png
    Screenshot 2024-02-25 123812.png
    3.1 MB · Views: 246
Last edited:
Joined
Aug 11, 2015
Messages
80 (0.02/day)
open your curve optimiser and do something like this
This is nonsense. This would indicate it is 100% Nvidias fault and they could fix it with a driver. The fix though is inside the Windows OS / DWM mostly.

Also this would totally ruin undervolt, which obviously everyone wants to use.
 

OneMoar

There is Always Moar
Joined
Apr 9, 2010
Messages
8,797 (1.64/day)
Location
Rochester area
System Name RPC MK2.5
Processor Ryzen 5800x
Motherboard Gigabyte Aorus Pro V2
Cooling Thermalright Phantom Spirit SE
Memory CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s) GIGABYTE RTX 3070 Ti GAMING OC
Storage Nextorage NE1N 2TB ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s) LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case Phanteks P300 /w 300A front panel conversion
Audio Device(s) onboard
Power Supply SeaSonic Focus+ Platinum 750W
Mouse Kone burst Pro
Keyboard SteelSeries Apex 7
Software Windows 11 +startisallback
This is nonsense. This would indicate it is 100% Nvidias fault and they could fix it with a driver. The fix though is inside the Windows OS / DWM mostly.

Also this would totally ruin undervolt, which obviously everyone wants to use.
that is a undervolt its -350mhz at the left end of the curve -60 at the middle and +100 at the peak voltage range (which is a overclock if you don't want to overclock you can simply leave the top end of the curve at +0)

there is no static unvolting anymore the only controls you have are the clock range and temp gone are the days of setting a static frequency all you can do is 'suggest' to the driver what you want the card todo
curves are not calculatated from a fixed VF-curve like the name would implie at idle all you are adjusting is the effective peak range(boost clock for a given point in the vf-thermal-load calculation ) the gpu will still idle down to ~200Mhz Max perf mode just tells the gpu to goto its maxium clock for the gpus desired point in the curve

its a work around untill whatever hardware acceleration shenanigans are resolved by _ALL_ involved parties

also the assumption that everybody wants to undervolt is a blanket and incorrect statement
 
Last edited:

wanderingpanda

New Member
Joined
Feb 26, 2024
Messages
1 (0.00/day)
So what does that mean? Because it's more restricted shouldn't that mean it's in the obviously capable hands of Nvidia? But it also sounds like because of that the fault is more likely on them.

Then again that is what's dictated, and windows fails to cooperate. Does this happen on other platforms?
 
Joined
Mar 11, 2019
Messages
320 (0.15/day)
This issue also happens at max clocks, it just happens less because the timing required to provoke the race condition in the compositor is minimized by processing the compositor faster.
 
Joined
Feb 14, 2012
Messages
2,356 (0.50/day)
System Name msdos
Processor 8086
Motherboard mainboard
Cooling passive
Memory 640KB + 384KB extended
Video Card(s) EGA
Storage 5.25"
Display(s) 80x25
Case plastic
Audio Device(s) modchip
Power Supply 45 watts
Mouse serial
Keyboard yes
Software disk commander
Benchmark Scores still running
This smells like the GTX 660 issue from years gone by ... they would have it fixed in one driver, and "break it" again the next driver ... pretty sure it was a hardware issue where the work-around needed to be fine-tuned for each driver build.
 
Joined
Apr 26, 2023
Messages
20 (0.03/day)
Just a heads up for the people that were using the workaround in my previous post #post-5104215
Code:
 2. And/Or add --disable-direct-composition-video-overlays to a browser shortcut

According to this reaction on my Chromium bugreport that flag has recently been changed in Chromium based browsers to:
Code:
 --disable_direct_composition_video_overlays=1 --disable_direct_composition_sw_video_overlays=1
 

rithra

New Member
Joined
Mar 10, 2024
Messages
3 (0.01/day)
First of all, hello,

I am having a black square problem, I am currently using Asus Dual GeForce RTX 3060, I was using 1050 TI before, I switched to 3060 at the beginning of this year at the end of January, I was already having problems while using 1050 TI, I bought a new card, the problem still persists that there is a problem with the video card. I don't think so because I tried windows 10 and 11, I formatted and both have the problem, but in normal time it was only in chrome, in the last 2 weeks it started to happen in discord, will this situation start to spread or will this problem be solved by nvidia, this situation bothers me.
I would be grateful if you could give me some information
 
Joined
Mar 11, 2019
Messages
320 (0.15/day)
First of all, hello,

I am having a black square problem, I am currently using Asus Dual GeForce RTX 3060, I was using 1050 TI before, I switched to 3060 at the beginning of this year at the end of January, I was already having problems while using 1050 TI, I bought a new card, the problem still persists that there is a problem with the video card. I don't think so because I tried windows 10 and 11, I formatted and both have the problem, but in normal time it was only in chrome, in the last 2 weeks it started to happen in discord, will this situation start to spread or will this problem be solved by nvidia, this situation bothers me.
I would be grateful if you could give me some information

Don't cross post, and read the thread.
 
Joined
Nov 29, 2013
Messages
13 (0.00/day)
There's no solution yet, it's a Windows bug, we are waiting for the Microsoft update for it
 

flynsquirrel

New Member
Joined
Mar 18, 2024
Messages
1 (0.00/day)
Has anyone noticed this in Steam? Been troubleshooting an issue with my GPU and after sucessfully getting my computer up and running I'm now seeing this where I wasn't before.
 

Attachments

  • Untitled.png
    Untitled.png
    573.8 KB · Views: 225
Joined
Aug 11, 2015
Messages
80 (0.02/day)
kb5035942 possibly fixes this.
I have tested it for the past 1 hour and it seems to fix the issue. I dont get jumping elements and black bars anymore when I am on twitter.com and move mouse cursor over elements in chrome while a video is playing. I could reproduce the issue before with 100% chance by just go on twitter, have a twitch.tv video playing in another tab, and then move the mouse cursor over addon icons in the chrome bar on the top. Every time the mouse cursor enters a little animation with mouseover like making a chrome addon icon background color gray, it would produce jumping and flickering elements on the twitter site or black cardboards.
 
Last edited:

PunchyXTuna

New Member
Joined
Mar 29, 2024
Messages
1 (0.00/day)
Sadly no. I installed it 2 days ago, but still experience 100+ artifacts daily.
KB5035942 (os build 22621.3374 or 22631.3374) was not the one that worked for me ; Its the 24H2 or 26090.1 os build That did , If you sign up to window's insider program and pick the Dev channel and go check for updates it should automatically install, Im pretty sure you can also find the iso here as long as you are signed up to the insider program : https://www.microsoft.com/en-us/software-download/windowsinsiderpreviewiso just make sure that the os build that starts with 26xxx.
 
Joined
Aug 11, 2015
Messages
80 (0.02/day)
I still stand by what I said. Issue seems to be fixed since kb5035942 on Windows 11 23h2 22631.3374 on my PC in Chrome 123.0.6312.86 with Nvidia drivers 551.86. Cant reproduce the issue anymore since 2 days now. I dont use Discord though or Visual Studio, just speaking about Chrome.
 
Joined
Mar 11, 2019
Messages
320 (0.15/day)
I still stand by what I said. Issue seems to be fixed since kb5035942 on Windows 11 23h2 22631.3374 on my PC in Chrome 123.0.6312.86 with Nvidia drivers 551.86. Cant reproduce the issue anymore since 2 days now. I dont use Discord though or Visual Studio, just speaking about Chrome.

the kb update might be the partial fix that reduced but did not 100% eradicate the issue in 22635, there might be other factors that are fixed in canary such as multi-display, with mpo's enabled.

There is a chrome (the gui, not the browser) checkerboarding issue in the CEF engine that is unrelated to the dcomp issue where it occurs on updates to the scrollbars, so there might be still a chrome issue afoot to be fixed.
 
Joined
Aug 11, 2015
Messages
80 (0.02/day)
@Sora can you link the chrome bug for that. I also dont use multi display btw, I think I had enabled MPOs though some time ago again.
 
Top