Ghetto Mods

de.das.dude · Sep 28, 2024

silentbogo said:
View attachment 365046 View attachment 365047

View attachment 365048

Had a little spare time today, so I finally modded my cheap-ass glue gun ($7.50 or so). It used to be powered by 4xAA batteries, which was painfully slow and very expensive in the long-run. NiMh batteries are even slower, unless I increase cell count.
With power outages on the way I've decided to add rechargeable batteries and slightly "overclock" it.
Did an extensive invasive surgery on the battery compartment. Now it runs off a pair of old Samsung LiPo batteries, which bumps the voltage from 6V to ~8.6V and bumps power from 8W to almost 12W. Now it heats up to working temperature in a couple of minutes, and lasts approximately 1.5H on full charge.
A proper dedicated charger would be nice. I'm currenly using my lab PSU for charging.

i see smart temp tower. Have you checked our community here

3D Printer Club

mine goes 70mm/s stock with the cooler mod. I have this new filament (see above) and its supposed to go 100m/s. Do you need to tune the acceleration? because stock prusa slicer, it doesnt really hit these speeds. Oh yea i need to compensate the higher speed with a 5c bump in temps. else the...

www.techpowerup.com

silentbogo · Sep 28, 2024

de.das.dude said:
i see smart temp tower. Have you checked our community here

Yeah, posted my workhorses there, but right now all of them are out of comission.
That was for a client. Had some issues with his Creality K1c. Just needed to do some calibration after few fixes and full Klipper flash.

IntelNick · Sep 28, 2024

More than a Ghetto Mod, I present Ghetto Build!

lexluthermiester · Sep 28, 2024

IntelNick said:
More than a Ghetto Mod, I present Ghetto Build!

No case?

micropage7 · Sep 29, 2024

WhatsApp Image 2024-09-29 at 08.37.37.jpeg

i hate the texture on the logo so i erase it by using sand paper, now it just smooth
please ignore my grip tape that made from safety tape

lexluthermiester · Sep 29, 2024

micropage7 said:
View attachment 365256
i hate the texture on the logo so i erase it by using sand paper, now it just smooth
please ignore my grip tape that made from safety tape

That's a very cool effect!

silentbogo · Sep 29, 2024

So, my eScooter charger started to rattle yesterday. Stock 4010 fan failed and didn't really work that well in the first place, so I replaced it with one of my crappy 4020 fans (leftovers from my 1U server builds).
Some cutting, some clipping, some hot glue, and now it purrz az a kittin' and stays cool during charging.

lexluthermiester said:
No case?

Maximum airflow!

micropage7 · Oct 3, 2024

WhatsApp Image 2024-10-03 at 08.42.43.jpeg

the annoying this 2nd laptop has double tape to hold the M2sata and the screw has custom O ring

silentbogo · Oct 3, 2024

Did double-sided tape on few client's laptops, where even with factory screws the SSD would bend with chassis and after some time wiggle-out of the slot a little, causing BSODs.

physicsjunky · Oct 6, 2024

I decided to help the air flow in my case, the main intake was pushing hot air from the gpu back into the gpu. So now the gpu is drawing fresh air and the exhaust has a more direct flow out of the case.

lexluthermiester · Oct 6, 2024

physicsjunky said:
View attachment 366385 View attachment 366386
I decided to help the air flow in my case, the main intake was pushing hot air from the gpu back into the gpu. So now the gpu is drawing fresh air and the exhaust has a more direct flow out of the case.

I vote this GhettoMod of the month! Betting it works well too!

physicsjunky · Oct 6, 2024

Thank you, This mod works but I'm combating a 10-20C delta on the gpu hotspot PTM 7950 did help and my card can pull 430W again but it still has that issue.

lexluthermiester · Oct 6, 2024

physicsjunky said:
Thank you, This mod works but I'm combating a 10-20C delta on the gpu hotspot PTM 7950 did help and my card can pull 430W again but it still has that issue.

If I may suggest a refinement? Black colored poster board. DollarTree, DollarGeneral or just about any office supply or art store will have some. They're easily cut, trimmed and taped/glued and will look a whole lot better! It'll still be ghetto, but at least it'll look nicer!

https://www.dollartree.com/black-foam-boards-20x30-in/25957

physicsjunky · Oct 6, 2024

I could paint the cardboard black or white. If i want to put more effort into it then I'll take your suggestion.

lexluthermiester · Oct 6, 2024

physicsjunky said:
I could paint the cardboard black or white. If i want to put more effort into it then I'll take your suggestion.

View attachment 366403

They do have white versions of those boards. White with that lighting it would look kinda cool!

Ahhzz · Oct 7, 2024

lexluthermiester said:
If I may suggest a refinement? Black colored poster board. DollarTree, DollarGeneral or just about any office supply or art store will have some. They're easily cut, trimmed and taped/glued and will look a whole lot better! It'll still be ghetto, but at least it'll look nicer!

https://www.dollartree.com/black-foam-boards-20x30-in/25957

ahh, black FOAM CORE. Bestest. Even provides some thermal insulation.

Macro Device · Oct 13, 2024

Who said that PC speaker can't be a 2.0 system?

And yes, it works.

physicsjunky · Oct 14, 2024

Update I took lexluthermiester suggestion and put a white foam board in while improving the design. The top cardboard piece is the same since it's not visible.

lexluthermiester · Oct 14, 2024

physicsjunky said:
Update I took lexluthermiester suggestion and put a white foam board in while improving the design. The top cardboard piece is the same since it's not visible.
View attachment 367501 View attachment 367502
View attachment 367503

With the lighting, it looks very cool! Nice!

Ahhzz · Oct 14, 2024

physicsjunky said:
Update I took lexluthermiester suggestion and put a white foam board in while improving the design. The top cardboard piece is the same since it's not visible.
View attachment 367501 View attachment 367502
View attachment 367503

excellent

run the Foam core for temp isolation, nice choice on the white

nomdeplume · Oct 14, 2024

physicsjunky said:
Update I took lexluthermiester suggestion and put a white foam board in while improving the design. The top cardboard piece is the same since it's not visible.

I notice a fair amount of case fans in near proximity. Intake or exhaust? LOLOLOLOLOLOL

Cardboard was lower memory and more uniform. Lex might've left out a few steps such as leaving the foam sit in the sun on blacktop to warm and then immediately pressing it between two flat objects. Or going beyond thread title by using numerous cycles to slowly create bends. Also worth noting is the superiority of spray adhesive to permanently set two flat even surfaces without ripples or tendency towards twisting.

Hey, if it works it works though. If it works too well and looks too pretty this thread wouldn't be much fun.

lexluthermiester · Oct 14, 2024

nomdeplume said:
Hey, if it works it works though. If it works too well and looks too pretty this thread wouldn't be much fun.

All I did was help them take what was super ghetto and make it look nicer and cool. It's still ghetto, but it's good looking ghetto. Am I right?

de.das.dude · Oct 14, 2024

nomdeplume said:
I notice a fair amount of case fans in near proximity. Intake or exhaust? LOLOLOLOLOLOL

Cardboard was lower memory and more uniform. Lex might've left out a few steps such as leaving the foam sit in the sun on blacktop to warm and then immediately pressing it between two flat objects. Or going beyond thread title by using numerous cycles to slowly create bends. Also worth noting is the superiority of spray adhesive to permanently set two flat even surfaces without ripples or tendency towards twisting.

Hey, if it works it works though. If it works too well and looks too pretty this thread wouldn't be much fun.

Putting in effort IN A GHETTO MOD????!! defeats the purpose imho

wNotyarD · Oct 14, 2024

de.das.dude said:
Putting in effort IN A GHETTO MOD????!! defeats the purpose imho

Luxury ghetto

nomdeplume · Oct 14, 2024

de.das.dude said:
Putting in effort IN A GHETTO MOD????!! defeats the purpose imho

I thought putting too much effort into something shoddy was a core requirement. Critique of these efforts having the effect of promoting even wilder machinations.

System Name	Monke \| Work Thinkpad\| J1nnx took Old Monke
Processor	Ryzen 5600X \| Ryzen 5500U \| FX8320
Motherboard	ASRock B550 Extreme4 \| ? \| Asrock 990FX Extreme 4
Cooling	240mm Rad \| Not needed \| hyper 212 EVO
Memory	2x16GB DDR4 3600 Corsair RGB \| 16 GB DDR4 3600 \| 16GB DDR3 1600
Video Card(s)	Sapphire Pulse RX6700XT 12GB \| Vega 8 \| Sapphire Pulse RX580 8GB
Storage	Samsung 980 nvme (Primary) \| some samsung SSD
Display(s)	Dell 2723DS \| Some 14" 1080p 98%sRGB IPS \| Dell 2240L
Case	Ant Esports Tempered case \| Thinkpad \| Antec
Audio Device(s)	Logitech Z333 \| Jabra corpo stuff
Power Supply	Corsair RM750e \| not needed \| Corsair GS 600
Mouse	Logitech G400 \| nipple
Keyboard	Logitech G213 \| stock kb is awesome \| Logitech K230
VR HMD	;_;
Software	Windows 10 Professional x3
Benchmark Scores	There are no marks on my bench

System Name	WS#1337
Processor	Ryzen 7 5700X3D
Motherboard	ASUS X570-PLUS TUF Gaming
Cooling	Xigmatek Scylla 240mm AIO
Memory	4x8GB Samsung DDR4 ECC UDIMM
Video Card(s)	MSI RTX 3070 Gaming X Trio
Storage	ADATA Legend 2TB + ADATA SX8200 Pro 1TB
Display(s)	Samsung U24E590D (4K/UHD)
Case	ghetto CM Cosmos RC-1000
Audio Device(s)	ALC1220
Power Supply	SeaSonic SSR-550FX (80+ GOLD)
Mouse	Logitech G603
Keyboard	Modecom Volcano Blade (Kailh choc LP)
VR HMD	Google dreamview headset(aka fancy cardboard)
Software	Windows 11, Ubuntu 24.04 LTS

System Name	micropage7
Processor	Intel Xeon X3470
Motherboard	Gigabyte Technology Co. Ltd. P55A-UD3R (Socket 1156)
Cooling	Enermax ETS-T40F
Memory	Samsung 8.00GB Dual-Channel DDR3
Video Card(s)	NVIDIA Quadro FX 1800
Storage	V-GEN03AS18EU120GB, Seagate 2 x 1TB and Seagate 4TB
Display(s)	Samsung 21 inch LCD Wide Screen
Case	Icute Super 18
Audio Device(s)	Auzentech X-Fi Forte
Power Supply	Silverstone 600 Watt
Mouse	Logitech G502
Keyboard	Sades Excalibur + Taihao keycaps
Software	Win 7 64-bit
Benchmark Scores	Classified

System Name	WS#1337
Processor	Ryzen 7 5700X3D
Motherboard	ASUS X570-PLUS TUF Gaming
Cooling	Xigmatek Scylla 240mm AIO
Memory	4x8GB Samsung DDR4 ECC UDIMM
Video Card(s)	MSI RTX 3070 Gaming X Trio
Storage	ADATA Legend 2TB + ADATA SX8200 Pro 1TB
Display(s)	Samsung U24E590D (4K/UHD)
Case	ghetto CM Cosmos RC-1000
Audio Device(s)	ALC1220
Power Supply	SeaSonic SSR-550FX (80+ GOLD)
Mouse	Logitech G603
Keyboard	Modecom Volcano Blade (Kailh choc LP)
VR HMD	Google dreamview headset(aka fancy cardboard)
Software	Windows 11, Ubuntu 24.04 LTS

System Name	micropage7
Processor	Intel Xeon X3470
Motherboard	Gigabyte Technology Co. Ltd. P55A-UD3R (Socket 1156)
Cooling	Enermax ETS-T40F
Memory	Samsung 8.00GB Dual-Channel DDR3
Video Card(s)	NVIDIA Quadro FX 1800
Storage	V-GEN03AS18EU120GB, Seagate 2 x 1TB and Seagate 4TB
Display(s)	Samsung 21 inch LCD Wide Screen
Case	Icute Super 18
Audio Device(s)	Auzentech X-Fi Forte
Power Supply	Silverstone 600 Watt
Mouse	Logitech G502
Keyboard	Sades Excalibur + Taihao keycaps
Software	Win 7 64-bit
Benchmark Scores	Classified

Ghetto Mods

de.das.dude

Pro Indian Modder

3D Printer Club

silentbogo

Moderator

IntelNick

Attachments

lexluthermiester

micropage7

lexluthermiester

silentbogo

Moderator

micropage7

silentbogo

Moderator

physicsjunky

lexluthermiester

physicsjunky

lexluthermiester

physicsjunky

lexluthermiester

Ahhzz

Super Moderator

Macro Device

physicsjunky

lexluthermiester

Ahhzz

Super Moderator

nomdeplume

lexluthermiester

de.das.dude

Pro Indian Modder

wNotyarD

nomdeplume

System Name	The TUF machine shh...
Processor	Ryzen 7 5800X3D (4.5Ghz)
Motherboard	TUF GAMING X570-PRO (WI-FI) BIOS 5013
Cooling	EK 360mm AIO Elite, D-RGB, Intake 6xEK-Vardar
Memory	G.SKILL RIPJAWS V 32GB (2 x 16GB) DDR4 3800mhz cl18-21-21-21-29
Video Card(s)	ASUS TUF RX 7900 XTX OC/PTM 7950
Storage	T-FORCE CARDEA ZERO Z330 1TB , Crucial P3 Plus 1TB
Display(s)	Gigabyte G27FC A, G32QC A
Case	Thermaltake Tower 500/Intake 2x Be quiet, Exhaust 1xBe quiet! PureWings2 120 highspeed 1xArticP12PST
Audio Device(s)	R-120SW, Logitech X-240 2.1 Speakers, Skullcandy PLYR
Power Supply	Corsair RM850x
Mouse	Logitech G502 Hero
Keyboard	Logitech G815
Software	Windows 11x64 Home
Benchmark Scores	Time Spy 21,266 6700XT(2x)/5800X3D 12,569 6700XT/5800X3D

System Name	OrangeHaze / Silence
Processor	i7-13700KF / i5-10400 /
Motherboard	ROG STRIX Z690-E / MSI Z490 A-Pro Motherboard
Cooling	Corsair H75 / TT ToughAir 510
Memory	64Gb GSkill Trident Z5 / 32GB Team Dark Za 3600
Video Card(s)	Palit GeForce RTX 2070 / Sapphire R9 290 Vapor-X 4Gb
Storage	Hynix Plat P41 2Tb\Samsung MZVL21 1Tb / Samsung 980 Pro 1Tb
Display(s)	22" Dell Wide/24" Asus
Case	Lian Li PC-101 ATX custom mod / Antec Lanboy Air Black & Blue
Audio Device(s)	SB Audigy 7.1
Power Supply	Corsair Enthusiast TX750
Mouse	Logitech G502 Lightspeed Wireless / Logitech G502 Proteus Spectrum
Keyboard	K68 RGB — CHERRY® MX Red
Software	Win10 Pro \ RIP:Win 7 Ult 64 bit

System Name	DLSS / YOLO-PC / FULLRETARD
Processor	i5-12400F / 10600KF / C2D E6750
Motherboard	Gigabyte B760M DS3H / Z490 Vision D / P5GC-MX/1333
Cooling	Laminar RM1 / Gammaxx 400 / 775 Box cooler
Memory	32 GB DDR4-3200 / 16 GB DDR4-3333 / 3 GB DDR2-700
Video Card(s)	RX 6700 XT / R9 380 2 GB / 9600 GT
Storage	A couple SSDs, m.2 NVMe included / 240 GB CX1 / 500 GB HDD
Display(s)	Compit HA2704 / MSi G2712 / non-existent
Case	Matrexx 55 / Junkyard special / non-existent
Audio Device(s)	Want loud, use headphones. Want quiet, use satellites.
Power Supply	Thermaltake 1000 W / Corsair CX650M / non-existent
Mouse	Don't disturb, cheese eating in progress...
Keyboard	Makes some noise. Probably onto something.
VR HMD	I live in real reality and don't need a virtual one.
Software	Windows 11 / 10 / 8

Processor	Intel i5 8400
Motherboard	Asus Prime H370M-Plus/CSM
Cooling	Scythe Big Shuriken & Noctua NF-A15 HS-PWM chromax.black.swap
Memory	8GB Crucial Ballistix Sport LT DDR4-2400
Video Card(s)	ROG-STRIX-GTX1060-O6G-GAMING
Storage	1TB 980 Pro
Display(s)	Samsung UN55KU6300F
Case	Cooler Master MasterCase Pro 3
Power Supply	Super Flower Leadex III 750w
Software	W11 Pro

System Name	G-Station 1.17 FINAL
Processor	AMD Ryzen 7 5700X3D
Motherboard	Gigabyte X470 Aorus Gaming 7 WiFi
Cooling	DeepCool AK620 Digital
Memory	Asgard Bragi DDR4-3600CL14 2x16GB
Video Card(s)	Sapphire PULSE RX 7900 XTX
Storage	240GB Samsung 840 Evo, 1TB Asgard AN2, 2TB Hiksemi FUTURE-LITE, 320GB+1TB 7200RPM HDD
Display(s)	Samsung 34" Odyssey OLED G8
Case	Thermaltake Level 20 MT
Audio Device(s)	Astro A40 TR + MixAmp
Power Supply	Cougar GEX X2 1000W
Mouse	Razer Viper Ultimate
Keyboard	Razer Huntsman Elite (Red)
Software	Windows 11 Pro