Recent content by 12k

I dont know if he's about to sell, but a fellow danish clocker has a tube for x8xx series cards, made by Gabbax... - But I doubt he wants to sell :(

I dont know my VGPU :D Hmm, does VDDQ help? - I got faith in 200mhz CPU boost will give me 200 marks in 05.. And I got... 50mhz more in GPU, 40 in GFX mem, just needs to cool it down properly, but impossible without another CPU, or - another pair of ram... But I think 2x 256MB gives worse...

Its a PCI-E x850XT :) Guess vddq aint that important then, but 2.67-2.68v is quite high.... - Reached my goal though... no1 @ ORB in x850XT, 05. WHQL approved, I reached 8840marks.

will VDDQ mod do me good? I run 2.68v @ VDD, and vgpu's quite high as well, dont know how high exactly, but high... - The card does benchies at 723/660, tweaked timmings.

I finally got the mod fixed, one issue though, I use heatkiller watercooling, and my "water"cooling is chilled at -28 to -20 deg C so theres a bit insulation, that gives a problem... The thing is.. The measuring point for the VGPU is badly located :'( - So I havnt put a reading spot there.. -...

Had that same issue... Solution.... Declocked memory Find core max followed by find mem max stresses your system beyound its max... - My rig could do 18 hours Prime95, 32M superpi, even 64M pi calculation... - PCmark2004 without any trouble... But it crashed at 610 on core... - Beyound gfx...

Thats the spirit ;) Sounds good indeed... Would really be a pitty not being able to overclock cause of using two different cards... 2x R520 is a bit too pricy I think ;) And I hope R520+R480 in AMR can compete with the new 4x PCI-E for Nvidia + Intel board...

Dear software guru's... Will one be able to clock the GFX's seperately when AMR comes ?? - I got a R480 (x850XT) at the moment but wanna get a R520 when its launched.. Will it be possible to do this with your GREAT overclocking tool ??? Best regards 12k

I got x850XT, so hope It'll get me a bit more ;) - 520 is stock :P

Hmm, gonna get my card modded later this week... Will 1,65v be perfect?? I use watercooling atm... BUT... Im gonna get a waterchiller soon, so It'll be a bit colder... Currently my temps can reach 53 LOAD on GPU while CPU + GPU is in "burn" mode... After 12 hours (delta max)

One final noob question from me.... What is electrical tape??... Got red PCB layout,,,, :\ - And where can i buy it ?

Hmm, soldering points ? Measuring points aye? Aint it possible with pencil?

The "thing" just right of the C1691 is missing.. :\ Does that do any difference? Btw... How much vgpu should I give the core - Is 1,65v safe?