Recent content by YakHunter

Please be aware that due to differences in the bios chips you will need a flashing tool for about 10 bucks to flash then, any software tools won't work as it's a 550ti rev 2 or a gts450 depending on which fake series you got. As the present bios is modified to tell the software its a 1050ti...

Hey this will work, as for the software try this hit me up if you want my files for translation from han and the rom that worked for me last year. p.s. setting on screen are right for these cards to flash even if from other vendor

So first Thx you all for: -rom suggestions, -links and getting me in the right direction. I got these f***ers working using a CH341A (Black edition) programmer and CH341A Programmer software version 1.29 from SkyGz.com. Set to PMC PM25LV512A as the used Chip on this cars is not supported i got...

here is a gpu-z shot as requested: All i got left is 1 questions: Is there a working bios editor to get all connectors working with a 1,5gb bios. Nibitor 5.9 and 6.06 as wont open the rom file? thank you all for the help and i keep you posted what happens YakHunter

memory is 6x H5GQ1H24AFR https://www.skhynix.com/eolproducts.view.do?pronm=GDDR5+SDRAM&srnm=H5GQ1H24AFR&rk=26&rc=graphics gpu got cleaned of markings except serials thx for any help, they seem to work if memory is capped at 1,5 gb and newer shader are disabled with modified drivers but thats...

Hey just got here by this post, i got 2 faked 1060 with about the same board but 1,5gb of vram on it, if you got any further in flashing these, you might want to share how. Only way i found so far was a hard flash with bios clamp like mentioned above but as i got these for free and wont invest a...