- Joined
- Oct 27, 2008
- Messages
- 11 (0.00/day)
- Location
- Kent,England
| Processor | q6600 |
|---|---|
| Motherboard | Asus P5Q deluxe |
| Cooling | Thermaltake pump & res withe tripple rad (taken from kandalf case) |
| Memory | 2MB OCZ Reaper 1066mhz |
| Video Card(s) | ati x1950xt (Tempory) Will Be ATI4850 within weeks |
| Storage | 36gb raptor, 500GB samsung HD502IJ |
| Case | Antec900 |
| Power Supply | Hiper typeR 580w |
| Software | Vista Ultimate 32bit |
To view this case mod, go here.
Specs:
ASUS P5K DELUXE
Q6600 @ 3.6 idle=35*c load=47*C
2MB OCZ REAPER 1066
TEMPORY GRAPHICS CARD (ATI X1950XT) SOON TO BE 4850
36GB RAPTOR
500GB SAMSUNG HD502IJ
THEMALTAKE WATERCOOLING KIT FROM KANDALF CASE TRIPPLE RAD WITH PUMP AND RES INTERGRATED
HIPER 580W TYPE R
PIONEER DVD
SKYTHE TEMP PANEL
Mods:
Watercooled with termaltake triple rad Scythe temp panel
got the matching antec oem fans for rad
and a uvCC
This was my first go at water cooling after a lot of research i finaly took the plunge into water. I found a thermaltake setup which had been removed from a kandalf case on ebay so i gave it a go. I decided to mount the rad ontop of the case by making a custom bracket as is the only place to fit the dam thing. it also takes advantage of the 200mm fan as well. As the antec case is too small to neatly fit in the pump iv had to have tht externaly which dosnt bother me at all. The computer is connected to my cinema setup, running a Benq projector, Mordaunt-short 5.1 with Denon AV. Also Tannoy studio monitors for Music.
Specs:
ASUS P5K DELUXE
Q6600 @ 3.6 idle=35*c load=47*C
2MB OCZ REAPER 1066
TEMPORY GRAPHICS CARD (ATI X1950XT) SOON TO BE 4850
36GB RAPTOR
500GB SAMSUNG HD502IJ
THEMALTAKE WATERCOOLING KIT FROM KANDALF CASE TRIPPLE RAD WITH PUMP AND RES INTERGRATED
HIPER 580W TYPE R
PIONEER DVD
SKYTHE TEMP PANEL
Mods:
Watercooled with termaltake triple rad Scythe temp panel
got the matching antec oem fans for rad
and a uvCC
This was my first go at water cooling after a lot of research i finaly took the plunge into water. I found a thermaltake setup which had been removed from a kandalf case on ebay so i gave it a go. I decided to mount the rad ontop of the case by making a custom bracket as is the only place to fit the dam thing. it also takes advantage of the 200mm fan as well. As the antec case is too small to neatly fit in the pump iv had to have tht externaly which dosnt bother me at all. The computer is connected to my cinema setup, running a Benq projector, Mordaunt-short 5.1 with Denon AV. Also Tannoy studio monitors for Music.
Last edited by a moderator:
