- Joined
- May 31, 2008
- Messages
- 5,787 (0.96/day)
- Location
- Switzerland, Heart of Europe
System Name | Fractality 1.0 |
---|---|
Processor | Intel Core i7-860 @ 3.6GHz |
Motherboard | EVGA P55 SLI |
Cooling | Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved |
Memory | 16GB Kingston Hyper RAM |
Video Card(s) | PNY GeForce 580 XLR8 |
Storage | 64GB and 180GB SSDs / 1TB and 2TB HDDs |
Display(s) | 24" Acer V243W |
Case | Fractal Design Define R2, sleeved all I/O cables |
Audio Device(s) | onboard |
Power Supply | Corsair HX750W modular, sadly only stock sleeving |
Software | Win 7 64bit |
To view this case mod, go here.
Specs:
CPU: Core2Duo E6300 oc'ed to 2450MHz
GPU: Gainward Radeon HD4850 Golden Sample
Mainboard: Asus P5B Premium
RAM: GeIL Black Dragon DDR2-800 2x 2Gb
PSU: Thermaltake Toughpower 750W
CPU Cooler: Zalman CNPS9700 LED
HD: Hitachi DeskStar 200Gb
Optical Drive: DVD Burner from some uknown manufacturer
Fans: 2x 180mm Silverstone 1x 120mm Zalman LED
Lights: Revoltec Twin Blue Cathodes
Mods:
Cable Management, removed one HD cage for better air flow and also because I simply don't need it, flipped top fan around, added lights
I have read about the SST-FT01 here on TPU and HAD to have that case! Cable management was a bit of challenge due to the small space behind the mobo tray, but with a lot of nerves and patience, it came out not too bad. I threw some blue ambient light in the case, but had to mount the rear exhaust fan outside the case, because it would eventually collide with one of the cathodes.
Next thign I'm gonna do is water cooling... because the oc'ed CPU gets hot on load!
Specs:
CPU: Core2Duo E6300 oc'ed to 2450MHz
GPU: Gainward Radeon HD4850 Golden Sample
Mainboard: Asus P5B Premium
RAM: GeIL Black Dragon DDR2-800 2x 2Gb
PSU: Thermaltake Toughpower 750W
CPU Cooler: Zalman CNPS9700 LED
HD: Hitachi DeskStar 200Gb
Optical Drive: DVD Burner from some uknown manufacturer
Fans: 2x 180mm Silverstone 1x 120mm Zalman LED
Lights: Revoltec Twin Blue Cathodes
Mods:
Cable Management, removed one HD cage for better air flow and also because I simply don't need it, flipped top fan around, added lights
I have read about the SST-FT01 here on TPU and HAD to have that case! Cable management was a bit of challenge due to the small space behind the mobo tray, but with a lot of nerves and patience, it came out not too bad. I threw some blue ambient light in the case, but had to mount the rear exhaust fan outside the case, because it would eventually collide with one of the cathodes.
Next thign I'm gonna do is water cooling... because the oc'ed CPU gets hot on load!
Last edited by a moderator: