KennyT772
New Member
- Joined
- Dec 21, 2005
- Messages
- 3,572 (0.51/day)
System Name | Raptor |
---|---|
Processor | Intel E8400 Wolfdale @3600 |
Motherboard | Asus P5Q-Pro LGA775 |
Cooling | Zalman CNPS9700 |
Memory | 1024mbx2 Crucial Ballistix DDR800 |
Video Card(s) | XFX 9600GT |
Storage | Seagate 7200.11 500GB |
Display(s) | Acer AL2216Wbd and Acer AL1717 |
Case | Gigabyte 3DAurora Black |
Audio Device(s) | Creative X-Fi Extreme Gamer Faitality |
Power Supply | OCZ GameXStream 500w |
To view this case mod, go here.
Specs:
New Parts:
DFI NForce4 UT Ultra-d
Sapphire x1800xt 256mb OC 700/1800
AMD 3200+ ~2.6 at 1.4vcore
Red LEDs on video card, heatsink, and ram
Old Parts:
XP-90Alu Heatsink/ThermalTake 92mm 2600rpm Fan
2x 512mb Corsair Value Ram Unmatched
$20 Tigerdirect Case
Creative Audigy 2 ZS
2x 80gb Western Digital Pata 133 Hdds
Sunbeam 4 Channel Fan Controller
ThermalTake 420W +12v 18A PSU
2x Masscool 80mm Fans
2x Aspire Blue Led 80mm Fans
Mods:
Case Paint
LEDs
Cable Management
update of Black & White. just got new parts and finally took pics to show you guys here. no changes on the case paint but i did add some leds behind the exaust fans to showcase the new mobo and video card. the leds i used are for car stereos and have built in resistors. all i had to do was wire them up to a 12v source and go. i spliced the 4 leds into a 3pin fan connector so i could dim them witht he fan controller.
Specs:
New Parts:
DFI NForce4 UT Ultra-d
Sapphire x1800xt 256mb OC 700/1800
AMD 3200+ ~2.6 at 1.4vcore
Red LEDs on video card, heatsink, and ram
Old Parts:
XP-90Alu Heatsink/ThermalTake 92mm 2600rpm Fan
2x 512mb Corsair Value Ram Unmatched
$20 Tigerdirect Case
Creative Audigy 2 ZS
2x 80gb Western Digital Pata 133 Hdds
Sunbeam 4 Channel Fan Controller
ThermalTake 420W +12v 18A PSU
2x Masscool 80mm Fans
2x Aspire Blue Led 80mm Fans
Mods:
Case Paint
LEDs
Cable Management
update of Black & White. just got new parts and finally took pics to show you guys here. no changes on the case paint but i did add some leds behind the exaust fans to showcase the new mobo and video card. the leds i used are for car stereos and have built in resistors. all i had to do was wire them up to a 12v source and go. i spliced the 4 leds into a 3pin fan connector so i could dim them witht he fan controller.
Last edited by a moderator: