malware
New Member
- Joined
- Nov 7, 2004
- Messages
- 5,422 (0.74/day)
- Location
- Bulgaria
Processor | Intel Core 2 Quad Q6600 G0 VID: 1.2125 |
---|---|
Motherboard | GIGABYTE GA-P35-DS3P rev.2.0 |
Cooling | Thermalright Ultra-120 eXtreme + Noctua NF-S12 Fan |
Memory | 4x1 GB PQI DDR2 PC2-6400 |
Video Card(s) | Colorful iGame Radeon HD 4890 1 GB GDDR5 |
Storage | 2x 500 GB Seagate Barracuda 7200.11 32 MB RAID0 |
Display(s) | BenQ G2400W 24-inch WideScreen LCD |
Case | Cooler Master COSMOS RC-1000 (sold), Cooler Master HAF-932 (delivered) |
Audio Device(s) | Creative X-Fi XtremeMusic + Logitech Z-5500 Digital THX |
Power Supply | Chieftec CFT-1000G-DF 1kW |
Software | Laptop: Lenovo 3000 N200 C2DT2310/3GB/120GB/GF7300/15.4"/Razer |
Samsung Electronics, a worldwide leader in digital consumer electronics and information technology, announced today its new line-up of high-density hard drives for high-end computing environments, the Spinpoint F3. The F3 operates at 7200 RPM with offerings of up to 1 Terabyte (TB) data storage capacity by using two 500 Gigabyte (GB) per platter disks. As well as meeting data center requirements for addition storage to meet rising demand and increasing performance needs, the new drives also deliver high-performance with lower power for desktop computers and servers.
The Spinpoint F3 utilizes advanced 500 GB per platter technology, so that two-platter 1 TB capacity is achieved. Increased areal density per platter provides up to a 30 percent higher performance than a three-platter 1 TB in the same 3.5" form factor. A reduction in mechanical parts also contributes to enhanced reliability in terms of anti-shock and data failure.
"Our customers require not only additional capacity but also high performance for their server and desktop storage systems, while promoting a green environment," said Choel-Hee Lee, vice president of marketing, Storage Systems Division, Samsung Electronics. "The massive capacity-per-platter and high-performance features of the new Spinpoint F3 make it an attractive solution for driving the growth of high-density storage."
"Market forecasts estimate 500 GB per platter and higher densities will experience over 15 percent annual growth in the next five years, with expectations that high density storage will become main stream for 3.5" storage beyond 2010," said Mark Geenen, president of TRENDFOCUS.
Samsung's new hard drive utilizes its low noise operation technology SilentSeek and NoiseGuard to achieve a quiet operation system. In addition, the new Spinpoint F3 is compliant with the (RoHS) restriction of hazardous substances directive.
The F3 incorporates a 7200 RPM rotational speed, a 3.0Gbps SATA interface, Native Command Queuing features and a 16 MB/32 MB buffer memory. The Spinpoint F3 is currently available in 500GB capacities worldwide. The 1 TB drive is scheduled for initial shipment in August.
View at TechPowerUp Main Site
The Spinpoint F3 utilizes advanced 500 GB per platter technology, so that two-platter 1 TB capacity is achieved. Increased areal density per platter provides up to a 30 percent higher performance than a three-platter 1 TB in the same 3.5" form factor. A reduction in mechanical parts also contributes to enhanced reliability in terms of anti-shock and data failure.
"Our customers require not only additional capacity but also high performance for their server and desktop storage systems, while promoting a green environment," said Choel-Hee Lee, vice president of marketing, Storage Systems Division, Samsung Electronics. "The massive capacity-per-platter and high-performance features of the new Spinpoint F3 make it an attractive solution for driving the growth of high-density storage."
"Market forecasts estimate 500 GB per platter and higher densities will experience over 15 percent annual growth in the next five years, with expectations that high density storage will become main stream for 3.5" storage beyond 2010," said Mark Geenen, president of TRENDFOCUS.
Samsung's new hard drive utilizes its low noise operation technology SilentSeek and NoiseGuard to achieve a quiet operation system. In addition, the new Spinpoint F3 is compliant with the (RoHS) restriction of hazardous substances directive.
The F3 incorporates a 7200 RPM rotational speed, a 3.0Gbps SATA interface, Native Command Queuing features and a 16 MB/32 MB buffer memory. The Spinpoint F3 is currently available in 500GB capacities worldwide. The 1 TB drive is scheduled for initial shipment in August.
View at TechPowerUp Main Site
Last edited: