darkside88
New Member
- Joined
- Aug 12, 2009
- Messages
- 2 (0.00/day)
To view this case mod, go here.
Specs:
intel pentium dual core cpu E5200 @ 2.5ghz
2x2gb kingmax ram
asus p5n-e sli MB
zotac GF 9800gtx+ 512mb gpu
Fortron epsilon 80plus 500w psu
asus silent knight II cpu cooler,
250Gb WD SATA 7200rpm,320Gb Seagate SATA 7200Rpm Hdd
Mods:
so this pc case originally was a blue crap, I painted the front side and the whole inside with black spary, I rotated the HDD bay because the gpu is a bit long
and fitted a bit hard, side ,top panels was covered with glossy black sticker, the original side panel was cutted, i put in the side panel a transparent plexi glass, at the front side i cutted a blowhole and i put there a 92x92 mm cooler, i was needed to make a new panel for on/off/reset buttons and for leds, i started to make a DIY fan controller but i had no time to finish so is in progress yet
, each cooler's blade was covered with orange sticker, I also need to do something with the cable managment opinions are welcome,
This is my first PC case mod but still in progress, the images was made with flash and witouth flash, and some of them was taken with cell phone. Sorry for my bad english if i wrote something bad..
Specs:
intel pentium dual core cpu E5200 @ 2.5ghz
2x2gb kingmax ram
asus p5n-e sli MB
zotac GF 9800gtx+ 512mb gpu
Fortron epsilon 80plus 500w psu
asus silent knight II cpu cooler,
250Gb WD SATA 7200rpm,320Gb Seagate SATA 7200Rpm Hdd
Mods:
so this pc case originally was a blue crap, I painted the front side and the whole inside with black spary, I rotated the HDD bay because the gpu is a bit long
and fitted a bit hard, side ,top panels was covered with glossy black sticker, the original side panel was cutted, i put in the side panel a transparent plexi glass, at the front side i cutted a blowhole and i put there a 92x92 mm cooler, i was needed to make a new panel for on/off/reset buttons and for leds, i started to make a DIY fan controller but i had no time to finish so is in progress yet, each cooler's blade was covered with orange sticker, I also need to do something with the cable managment opinions are welcome, This is my first PC case mod but still in progress, the images was made with flash and witouth flash, and some of them was taken with cell phone. Sorry for my bad english if i wrote something bad..
Last edited by a moderator:
